GettingStarted_WinCC.pdf

______________

SIMATIC WinCC V7.0 Getting started

______________

SIMATIC

______________

WinCC V7.0

Getting started

______________

Printout of the Online Help

______________

04/2008

A5E02211557-01

Getting started

Welcome

Icons

Creating a project

Configure communication

Configuring the Process

Screens

Archiving and displaying

values

Outputting values from the

process archive

Configuring messages

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and

operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes

in this documentation qualified persons are defined as persons who are authorized to commission, ground and

label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:

WARNING

This device may only be used for the applications described in the catalog or the technical description and only

in connection with devices or components from other manufacturers which have been approved or

recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage,

positioning and assembly as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Industry Sector

Postfach 48 48

90327 NÜRNBERG

GERMANY

Printout of the Online Help

Ⓟ 05/2008

Technical data subject to change

Safety Guidelines

Table of contents

1 Getting started........................................................................................................................................... 7

2 Welcome.................................................................................................................................................... 9

3 Icons........................................................................................................................................................ 11

4 Creating a project .................................................................................................................................... 13

4.1 Creating a project......................................................................................................................... 13

4.2 Working with WinCC.................................................................................................................... 13

4.3 Creating the "Quick_Start" project ............................................................................................... 15

5 Configure communication........................................................................................................................ 19

5.1 Configure communication............................................................................................................ 19

5.2 Check the channels and connections in WinCC.......................................................................... 20

5.3 Tags in WinCC............................................................................................................................. 21

5.4 Adding a Channel ........................................................................................................................ 22

5.5 Creating connections ................................................................................................................... 25

5.6 Creating tag group ....................................................................................................................... 28

5.7 Creating a process tag................................................................................................................. 30

5.8 Scaling process tags in WinCC.................................................................................................... 36

5.9 Creating Internal Tags ................................................................................................................. 39

6 Configuring the Process Screens ............................................................................................................ 43

6.1 Configuring the Process Screens ................................................................................................ 43

6.2 The Graphics System .................................................................................................................. 44

6.3 Creating process screens............................................................................................................ 45

6.4 Editing Process Screens.............................................................................................................. 47

6.4.1 Editing Process Screens.............................................................................................................. 47

6.4.2 Inserting graphic objects from the library..................................................................................... 48

6.4.3 Inserting "Static text".................................................................................................................... 55

6.4.4 Editing the process screen "SAMPLE.pdl" .................................................................................. 57

6.5 Using customized menus and toolbars........................................................................................ 59

6.5.1 Using customized menus and toolbars........................................................................................ 59

6.5.2 Creating procedures for customized menus and toolbars........................................................... 60

6.5.3 Creating a customized menu for screen changes ....................................................................... 66

6.5.4 Creating a customized toolbar to exit Runtime............................................................................ 71

Getting started

04/2008, Printout of the Online Help

Table of contents

6.6 Process picture dynamics........................................................................................................... 77

6.6.1 Process picture dynamics........................................................................................................... 77

6.6.2 Making the fill level indicator dynamic......................................................................................... 78

6.6.3 Inserting an I/O Field and Making it Dynamic............................................................................. 82

6.7 Defining the Runtime Properties................................................................................................. 87

6.8 Activating the project................................................................................................................... 91

6.9 Test project ................................................................................................................................. 93

6.10 Deactivating a project.................................................................................................................. 96

7 Archiving and displaying values............................................................................................................... 97

7.1 Archiving and displaying values.................................................................................................. 97

7.2 The archive system..................................................................................................................... 97

7.3 Starting Tag Logging................................................................................................................. 100

7.4 Configuring Timers.................................................................................................................... 101

7.5 Creating Process Value Archive ............................................................................................... 104

7.6 Editing the process value archive ............................................................................................. 108

7.7 Configuring the Process Screen ............................................................................................... 113

7.7.1 Configuring the Process Screen ............................................................................................... 113

7.7.2 Configuring a trend window....................................................................................................... 114

7.7.3 Configuring a table window....................................................................................................... 122

7.8 Modifying a customized menu for screen changes................................................................... 127

7.9 Defining the Runtime Properties............................................................................................... 131

7.10 Activating and testing the project.............................................................................................. 134

8 Outputting values from the process archive........................................................................................... 139

8.1 The message report system...................................................................................................... 139

8.2 Outputting values from the process archive.............................................................................. 141

8.3 Creating a Page Layout ............................................................................................................ 141

8.4 Editing the Page Layout............................................................................................................ 144

8.4.1 Editing the Page Layout............................................................................................................ 144

8.4.2 Establishing properties of the page layout................................................................................ 146

8.4.3 Determine log content............................................................................................................... 150

8.4.4 Editing the header..................................................................................................................... 154

8.4.5 Editing the footer....................................................................................................................... 158

8.5 Editing the print job ................................................................................................................... 161

8.5.1 Editing the print job ................................................................................................................... 161

8.5.2 Defining and editing the Print Job............................................................................................. 161

8.6 Defining the Runtime Properties............................................................................................... 166

8.7 Activating and testing the project.............................................................................................. 167

8.8 Printing log ................................................................................................................................ 171

Getting started

04/2008, Printout of the Online Help

Table of contents

9 Configuring messages........................................................................................................................... 175

9.1 Configuring messages............................................................................................................... 175

9.2 The message system enables the following:............................................................................. 176

9.3 Start alarm logging..................................................................................................................... 178

9.4 Setting message blocks and message classes......................................................................... 179

9.5 Changing the length of the user text blocks............................................................................... 183

9.6 Configuring bit messages .......................................................................................................... 185

9.6.1 Configuring bit messages .......................................................................................................... 185

9.6.2 Creating bit messages............................................................................................................... 185

9.6.3 Editing bit messages.................................................................................................................. 187

9.7 Configuring analog messages ................................................................................................... 192

9.7.1 Configuring analog messages ................................................................................................... 192

9.7.2 Integrating limit value monitoring............................................................................................... 192

9.7.3 Setting Limit Values ................................................................................................................... 195

9.8 Define color of the message statuses........................................................................................ 200

9.9 Configuring the Process Screen................................................................................................ 202

9.9.1 Configuring the Process Screen................................................................................................ 202

9.9.2 Configuring an Alarm Message Window.................................................................................... 203

9.9.3 Inserting a slider object and making it dynamic......................................................................... 207

9.9.4 Inserting a scale......................................................................................................................... 212

9.9.5 Inserting an I/O Field and Making it Dynamic............................................................................ 216

9.10 Adapting the User-defined Menu for a Picture Change............................................................. 222

9.11 Defining the Runtime Properties................................................................................................ 226

9.12 Activate the project .................................................................................................................... 228

9.13 Test project ................................................................................................................................ 230

Glossary ................................................................................................................................................ 237

Index...................................................................................................................................................... 245

Getting started

04/2008, Printout of the Online Help

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: