B150PN01.pdf

(119 KB) Pobierz
穨010813.PDF
Product Functional Specification
15 inch SXGA+ Color TFT LCD Module
Model Name : B150PN01
( ¨ ) Preliminary Specification
( ) Final Specification
Note: This Specification is subject to change without notice.
(C) Copyright AU Optronics, Inc.
July, 2001 All Rights Reserved.
B150PN01 Ve r.06
1/20
No Reproduction and Redistribution Allowed.
345334461.001.png
I. Contents
1.0 Handling Precautions
2.0 General Description
2.1 Characte ristics
2.2 Functional Block Diagram
3.0 Absolute Maximum Ratings
4.0 Optical Characteristics
5.0 Signal Interface
5.1 Connectors
5.2 Signal Pin
5.3 Signal Description
5.4 Signal Electrical Characteristics
5.5 Signal for Lamp Connector
6.0 Pixel Format Image
7.0 Parameter Guide Line for CFL Inverter
8.0 Interface Timings
8.1 Timing Characteristics
8.2 Timing Definition
9.0 Power Consumption
10.0 Power ON/OFF Sequence
11.0 Mechanical Characteristics
II Record of Revision
Version and Date Page Old description
New Description
Remark
0.1. 2001/1/29
All First Edition for Customer
All
0.2. 2001/4/16
5 Weight 650g max.
Weight 570g max.
0.3 2001/6/14
5 Thickness 6.3mm max.
Thickness 6.2mm max.
0.4 2001/7/6
5 Weight 570g max.
Weight 550g typ.
0.5 2001/7/13
5
Power consumption 5.5W
0.6 2001/8/13
8 Signal connector: JAE FI-
Signal connector: JAE FI-XB30SR- Connector type
(C) Copyright AU Optronics, Inc.
July, 2001 All Rights Reserved.
B150PN01 Ve r.06
2/20
No Reproduction and Redistribution Allowed.
345334461.002.png
SEB20P-HF13
HF11
change from 20
pin to 30 pin.
0.6 2001/8/13
18 Update mechanical drawing
1.0 Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was
taken out from the container, do not press the center of the CCFL Reflector edge. Instead,
press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be
damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it
should be taken into consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source(2.11,
IEC60950 or UL1950), or be applied exemption.
(C) Copyright AU Optronics, Inc.
July, 2001 All Rights Reserved.
B150PN01 Ve r.06
3/20
No Reproduction and Redistribution Allowed.
345334461.003.png
14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit(2.4,
IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
(C) Copyright AU Optronics, Inc.
July, 2001 All Rights Reserved.
B150PN01 Ve r.06
4/20
No Reproduction and Redistribution Allowed.
2.0 General Description
This specification applies to the 15.0 inch Color TFT/LCD Module B150PN01.
This module is designed for a display unit of notebook style personal computer.
The screen format is intended to support the SXGA+ (1400(H) x 1050(V)) screen and 262k colors
(RGB 6-bits data driver).
All input signals are LVDS interface compatible.
This module does not contain an inverter card for backlight.
(C) Copyright AU Optronics, Inc.
July, 2001 All Rights Reserved.
B150PN01 Ve r.06
5/20
No Reproduction and Redistribution Allowed.
Zgłoś jeśli naruszono regulamin