dragon_balaclava_en- kominiarka, szablon.pdf

DRAGON BALACLAVA

Head circumference

42-44-46-48-50-52 cm

Pattern piece overview

MATERIAL

- 40-40-40-45-45-45 cm velour knit

- 5 cm x 16 cm pieces of yellow, red,

turquoise and green velour knit

- 10 cm yellow ribbing

PATTERN PIECES

cut

1a+1b side panel

2a+2b center panel

3 face-edge binding*

4a+4b bottom-edge binding*

5 trim panel

1+1+1+1

CUTTING

Trace pattern pieces onto tissue paper as shown

on pattern piece overview. Join pattern pieces

1a and 1b, 2a and 2b, and 4a and 4b.

Cut side and center panels from velour knit

as indicated on list of pattern pieces.Add 1 cm

seam allowances.

Cut trim panels from different-colored pieces

of velour knit, one panel from each color. Add

1 cm seam allowances.

Cut face-edge and bottom-edge bindings

from ribbing. Patterns for bindings* include

seam allowances. Check length of bindings*

before sewing as the stretch and recovery

qualities of different knits vary.

SEWING

Stitch seams with straight stitch and finish them

with serger or zigzag stitch. Topstitch seams

using presser foot edge as guide.

Preparation: Stitch trim panels together in

pairs, right sides facing; leave their bottom edges

unstitched. Use pattern piece for trim panel as

template as you sew! Trim seam allowances and

clip to stitching at corners. Open out seam

allowances by pressing lightly with point of iron

and turn trims right side out. Machine-baste

bottom edges of trims together. Machine-baste

trims to balaclava side panels following pattern

markings.

Joining: Stitch side panels to center panel and

finish seams. Fold seam allowances toward

center panel and topstitch seams. Stitch, finish

and topstitch center front seam.

Face edge: Join ends of face-edge binding strip

to form closed loop and fold it in half, wrong

sides together. Mark quarter points on face-

edge binding and along face edge. Pin binding

to face edge, right sides together, aligning quarter-

point markings. Stitch binding to face edge,

stretching binding as you sew, and finish seam.

Topstitch face edge.

Bottom edge: Finish bottom edge with binding

as follows: Stitch right side of binding to wrong

side of bottom edge of balaclava. Fold binding

to right side, turn its seam allowance under

and topstitch it to balaclava close to edge.

CONTROL SQUARE

size 5 x 5 cm .

You can check by measuring

the dimensions of this

control square that your

patterns have been printed

out at the correct scale. If

the dimensions are not

correct, adjust the paper

size setting on your printer

to A4 and print the patterns

out again scaled to the

correct size.

PL 46 90401 OULU FINLAND INFO: info@ottobre.fi

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: