STK392_110.PDF

Ordering number:ENN5170

Thick Film Hybrid IC

STK392-110

3-Channel Convergence Correction Circuit

(I C max = 3A)

Overview

The STK392-110 is a convergence correction circuit IC for

video projectors. It incorporates three output amplifiers in

a single package, making possible the construction of CRT

horizontal and vertical convergence correction output cir-

cuits for each of the RGB colors using ust two hybrid ICs.

The output circuit use a class-B configuration, in compari-

son with the STK392-010, realizing a more compact pack-

age and lower cost.

Package Dimensions

unit:mm

4083

[STK392-110]

64.0

55.6

8.5

3.6

Applications

• Video projectors

2.9

Features

• 3 output amplifier circuits in a single package

• High maximum supply voltage (V CC max =

2.54

0.5

0.4

(6.21)

17 ´ 2.54=43.18

5.5

38V)

SANYO : SIP18

C/W)

• High temperature stability (T C max=125

j-c=3.0

• Separate predriver and output stage supplies

• Output stage supply switching for high-performance

designs

• Low inrush current when power is applied

Series Organization

The following devices form a series with varying output capacity and application grade. Some of the devices below are

under development, so contact your nearest sales representative for details.

f H

V C

I C

3.0˚C/W

2.6˚C/W

2.1˚C/W

1.8˚C/W

1.5˚C/W

1.3˚C/W

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

93099TH (KT)/80995HA (ID) No.5170–1/4

• Low thermal resistance (

STK392-110

Specifications

Maximum Ratings at Ta = 25˚C

I C

(

˚C/W

˚C

–

Operating Characteristics at Ta = 25˚C, Rg=50

, V CC =

30V, specified test circuit

V N

I C

V N

–

t D

Note :

All tests are conducted using a constant-voltage regulated supply unless otherwise specified.

The output noise voltage is the peak value of an average-reading meter with an rms value scale (VTVM).

Block Diagram

No.5170–2/4

STK392-110

Equivalent Circuit

Test Circuit

No.5170–3/4

STK392-110

Sample Application Circuit

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer's

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of September, 1999. Specifications and information herein are

subject to change without notice.

PS No.5170–4/4

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: