MA62698GBB.PDF
(
10 KB
)
Pobierz
MA62698GBB.PDF
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
MAZDA
626
YEAR
98
fi
PETROL
DIESEL
X
MAKE
MOD.
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment, on the
bulkhead of the support of the left shock absorber. Pass the cables through the
rubber sleeve above the lung of the servobrake.
POWER SUPPLY
+ 30:
connect to the 4 mm
2
WHITE/RED wire located in the multiway connector, at
the rear of the fuse box.
- 31:
connect to the car body.
IGNITION WIRE
+ 15/54:
connect to the 2,5 mm
2
BLUE wire located in the wiring harness coming
out of the 8 way connector, in the lower part, behind the fuse box.
DIRECTION INDICATORS
Connect to the 1 mm
2
GREEN/WHITE and GREEN/BLACK wires with SILVER
references located in the bundle of cables coming out of the steering column.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
cut the RED/BLACK wire.
Front window, passenger’s side:
cut the GREEN/WHITE wire with LIGHT BLUE references.
These wires are located in the wiring harness coming out of the respective
switches.
CENTRAL DOORS LOCKING Negative control signal
Connect to the GREY/RED wire (lock) and WHITE/BLACK wire (unlock), located in
the wiring harness coming out of the multiway connector of the green central doors
locking unit positioned on a bracket near the clutch pedal.
IMMOBILISATION POINT
Electronic central unit
Cut the 0,5 mm
2
BLACK/WHITE wire with SILVER references located in the wiring
harness coming out of the 8 way connector, behind the fuse box ( it is the first of
the three wires starting from the lower part).
BONNET SWITCH
Install an additional switch on the headlamp support plate, using the original hole
near the left lateral bonnet stop.
DOORS SWITCH
Connect to the 1 mm
2
RED/WHITE wire located in the wiring harness of the 3 way
connector, in the front part of the fuse box.
BOOT SWITCH
Connect to the 1 mm
2
BLACK/BLUE wire located in the wiring harness coming out
of the right lamp in the boot.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
ma62698gbb.doc
Plik z chomika:
j_czaja1
Inne pliki z tego folderu:
BM74503GBBT(1).PDF
(20 KB)
AUA403GBD(1).PDF
(57 KB)
AUA403GBB(1).PDF
(57 KB)
CHPTC01GBB(1).PDF
(18 KB)
DANEX98GBB(1).PDF
(10 KB)
Inne foldery tego chomika:
Zgłoś jeśli
naruszono regulamin