SCR007_ENG_SRG3500.pdf

(403 KB) Pobierz
428375186 UNPDF
SRG3500 TETRA GATEWAY/REPEATER
Fully featured and conigurable Gateway
Repeater radio
• 10 Watts RF Power (customisable in TMO or DMO)
• Voice and emergency calls from DMO to TMO
• Voice and emergency calls from TMO to DMO
• Support for 0, 1 or 2 control heads and 2 PEI data ports
• 6 remote soft keys via 2 wire interface
• Tamper proof or smart card E2E encryption options
3000 SERIES
428375186.001.png
Gateway Mode:
improved coverage:
Extends user coverage into network dead spots such
as buildings.
operational effectiveness:
Status messaging, SDS messaging and GPS location data
seamlessly pass through the gateway. The dispatcher is able
to see the locations of the foot crew and the vehicle on their
mapping system.
gateway services are an option enabled by a feature
license code
Simpliied communication:
With intelligent call conversion, the dispatcher only ever has
to contact the SRG3500, if the crew is in the vehicle they will
take the call or message, if the crew is on foot the call or
message is routed to the DMO users automatically.
TMO
TETRA
NETWORK
DMO
NO NETWORK COVERAGE
Repeater Mode:
improved coverage:
Extends user coverage into network dead spots such
as buildings.
DIRECT MODE
DIRECT MODE
428375186.002.png
Extending operational reach
Key Features:
• Up to 12 I/O lines available – all can be activated by or
activate status messages
• Support for AT command set
• Two physical data ports enable two data applications to
be supported at the same time
• Remote soft key interface
• Transceiver only installation – for remote alarms, telemetry
or as a TETRA modem
• Transceiver and console installation – with vehicle,
motorcycle, marine, desk and rack mount kits
• Transceiver and Virtual console installation – for 3rd
party integrators to control the transceiver direct from
a Windows based mobile computer or desk based PC
connected across a LAN/WAN
• Transceiver and 2 console installation – for ambulance
and ire vehicle installations Transceiver and remote
control installation – for covert and semi-covert use
• Transceiver and Applications Interface Unit – for 3rd party
control of the transceiver and user interface
• Air approved transceiver variant
• Transportable transceiver variant
• Large text mode – designed for easy readability in vehicles
• Common Sepura User Interface on the real and
Virtual Console
• Optional GPS module – integral within the transceiver
• Emergency Key – separate from other keys
• Colour backlights in emergency calls
• Fully conigurable emergency call behaviour including
live microphone and status messaging options
• Customisable ‘Press and Action’ soft keys giving access to
12 different functions with optional help ile
• Multi-lingual user interface: Eastern and Western European
languages plus Cyrillic, Chinese and Korean and Arabic
• Full set of programming and coniguration software tools
– Radio Manager, E2E Key management tools (CMC and
CDT) and SKMS
SRG3500 TETRA
Gateway Repeater Radio:
The SRG3500 Gateway/Repeater radio has all the features
and functionality of the SRM3500, the most conigurable
mobile terminal in the market today. The Sepura Common
user Interface gives dual advantages of easy integration
into existing leets whilst minimising user training.
The SRG3500 provides a solution to all operational
requirements thanks to its two data ports, dual console and
digital I/O capabilities. It can be conigured for use in many
vehicles including cars, motorcycles, trains, ambulances,
marine craft and ire appliances.
For ixed and mobile control room environments a range of
accessories allow the SRG3500 to be desk or rack mounted.
For specialist users the SRG3500 is available with optional
covert installation and controls, a 10W transportable variant
and an air approved product for helicopter and ixed
wing installations.
The SRG3500 can be controlled from 1 or 2 DIN mounted
consoles that may be mounted up to 10m away from the
transceiver, or via 1 or 2 PEI ports or via the Virtual Console
loaded on a PC that could be many thousands miles
away across a WAN.
As a standalone transceiver, it can be used as a data
modem, for telemetry or for remote alarms and all the
transceiver interfaces are available for use by third parties.
Switching is easily achieved between trunked (TMO), direct
(DMO) , repeater (RMO) and gateway (GMO) modes via
either a soft key, from the menu or from an external device.
The SRG3500 can be customised through the use of Short
Data Applications (SDA), these allow system integrators to
create and run complex form driven programmes that can
interact with back ofice systems via SDS messaging.
With a market leading 10 Watts of RF power in both DMO
and TMO modes, the SRG3500 ensures that communication
between users can be maintained in areas of poor
TETRA coverage.
The SRG3500 is based on the 3000 series architecture and
provides the same security features. The SRG3500 has been
built to address security by including tamper proof security
processors or a smart card connector. E2E encryption can
be implemented by a software upgrade.
The SRG3500 is designed with an integral GPS option. In
addition to the standard position reporting, the gateway
can send its current GPS location when the emergency call
or lone worker alert is initiated. Ensuring that the position of a
user is known will enable appropriate resources to be swiftly
deployed when assistance is required.
428375186.003.png
SRG3500 SPECIFICATIONS
All speciications are relative to +25°C unless otherwise stated.
Size and Weight
Transceiver <980g
180mm W x 54mm x 110mm D
Console <200g
187mm W x 64mm x 30mm D
conSole diSPlay
128 x 64 pixels LCD display with
coloured backlights
up to 6 lines of 24 characters displayed
Dual remote console support
Virtual console support
data SeRviceS
Status Messaging
Short Data Service Messaging
(SDS Type 4, 140 characters)
SDA – Short Data Applications allow third
parties to create and deploy customised
applications to the terminal that can interact
with a back end system via SDS
Circuit Switched Data Calls
Multi-slot Packet Data
Network performance monitoring
Optional time stamping of Status and SDS
messages
Text Message Data Store
gPS ReceiveR - oPtional
12 channel GPS receiver
- 163 dBW acquisition sensitivity
gateWay SeRviceS
Group voice calls from DMO to TMO
Group voice calls from TMO to DMO
Emergency group call from DMO to TMO
Emergency group call from TMO to DMO
Transmission of Gateway Presence signal
Monitoring for other Gateways
Pre-emption (in either direction) of existing call
SDS messaging in either direction1
Conigurable routing of SDS messages to
console or PEI
Intelligent handling of point to point calls and
SDS messages whilst operating as a Gateway
Gateway services are an option enabled by a
feature license code
SecuRity
Fully integrated E2EE hardware solution,
enabled by software upgrade only
Multi-Algorithm support for AES, iDEA and uK
speciic algorithms
Additional Tamper Protection option
Optional integral SIM connector for Smart
Card solution
otheR FunctionS and FeatuReS
Support for 2000 Talkgroups, with any
combination of TMO or DMO groups
Easily managed via Talkgroup folders, 200
folders with up to 75 groups per folder
Priority group scanning with support for
Background groups
Fast group Access supports up to 5 TMO and 5
DMO groups
Fixed and user Deinable Talkgroup Scan Lists
Dynamic Group Number Assignment including
lifetime timers, up to 50 Dynamic groups
Telephone and Radio user Address Book.
Call History
Late Entry
Authentication – Mutual and SwMI initiated
Air Interface Encryption TEA1, TEA2, TEA3, TEA4
supported
Support for TETRA Security Class 1 (Clear), Class
2 - SCK and Class 3 DCK with OTAR of CCK
Temporary Enable and Disable
Integrated and SMART Card based E2EE
options
Transmit Inhibit (TXI) with on/off Status
messaging
ETSI compliant PEI port. AT-command interface
for applications
Macro keys – operation of a single key will
perform several complex functions
Real Time Clock
Missed call indication
Conigurable Call Out feature
Covert mode
Ambience listening
FRequency BandS
300 - 344MHz 1
350 - 372MHz 1
380 - 430MHz
440 - 473MHz
806/825 paired with 851/870MHz
The Transceiver supports the full - 50MHz for the
380-430MHz product and allows Trunked (TMO)
and direct (DMO) mode frequency pairs to be
allocated anywhere in the frequency band.
RePeateR SeRviceS
Repeats DMO voice and tone signalling on
selected talk group
Repeats SDS and Status messaging on selected
talk group
ETSI Type 1A DMO Repeater for channel
eficient operation
Transmission of Repeater Presence signal
Priority Call
Emergency Call (Pre-emptive Priority Call)
Supports E2E Encrypted DMO trafic
Monitoring of and participation in calls whilst in
Repeater mode
Conigurable Repeater power levels
PoWeR
10 watt RF Power output (Class 2)
RF power adjustable in steps of 5dB
Adaptive Power Control supported
audio
Rated Audio Output - 8 W @ 1kHz into 4 Ohms
enviRonmental
Dust & Water protection to IEC529 IP54
ETS 300 019 -2-5 drop, vibration and humidity
Storage Temp -40°C to +85°C
Operating Temp -30°C to +70°C
voice SeRviceS
Full Duplex Calls (to MS and PABX/PSTN)
Half Duplex Calls (Individual and Group)
Priority Call
Emergency Call (Pre-emptive Priority Call)
Talking Party Identity
Calling Line Identity Presentation
DTMF Dialling
PoWeR SuPPly
10.8 to 15.6V DC, typical 13.8V DC
1 – Further information available on request
Sepura’s policy is to continually improve its products and services.
The features and facilities described in this document were correct
at publication, but are subject to change without notice.
© SEPuRA PLC
For more information visit www.sepura.com
SRC007 SRG3500 DTS - ENGLISH - APRIL08
428375186.004.png
Zgłoś jeśli naruszono regulamin