smok kaptur.pdf

(46 KB) Pobierz
Lohikaarmelakki_kielet_MX
DRAGON BALACLAVA
Head circumference
42-44-46-48-50-52 cm
Pattern piece overview
2a
5
MATERIAL
- 40-40-40-45-45-45 cm velour knit
- 5 cm x 16 cm pieces of yellow, red,
turquoise and green velour knit
- 10 cm yellow ribbing
1a
1b
PATTERN PIECES
cut
2b
1a+1b side panel
2
2a+2b center panel
1
3
3 face-edge binding*
1
4a+4b bottom-edge binding*
1
5 trim panel
1+1+1+1
4a
4b
CUTTING
Trace pattern pieces onto tissue paper as shown
on pattern piece overview. Join pattern pieces
1a and 1b, 2a and 2b, and 4a and 4b.
Cut side and center panels from velour knit
as indicated on list of pattern pieces.Add 1 cm
seam allowances.
Cut trim panels from different-colored pieces
of velour knit, one panel from each color. Add
1 cm seam allowances.
Cut face-edge and bottom-edge bindings
from ribbing. Patterns for bindings* include
seam allowances. Check length of bindings*
before sewing as the stretch and recovery
qualities of different knits vary.
1b
SEWING
Stitch seams with straight stitch and finish them
with serger or zigzag stitch. Topstitch seams
using presser foot edge as guide.
Preparation: Stitch trim panels together in
pairs, right sides facing; leave their bottom edges
unstitched. Use pattern piece for trim panel as
template as you sew! Trim seam allowances and
clip to stitching at corners. Open out seam
allowances by pressing lightly with point of iron
and turn trims right side out. Machine-baste
bottom edges of trims together. Machine-baste
trims to balaclava side panels following pattern
markings.
Joining: Stitch side panels to center panel and
finish seams. Fold seam allowances toward
center panel and topstitch seams. Stitch, finish
and topstitch center front seam.
Face edge: Join ends of face-edge binding strip
to form closed loop and fold it in half, wrong
sides together. Mark quarter points on face-
edge binding and along face edge. Pin binding
to face edge, right sides together, aligning quarter-
point markings. Stitch binding to face edge,
stretching binding as you sew, and finish seam.
Topstitch face edge.
Bottom edge: Finish bottom edge with binding
as follows: Stitch right side of binding to wrong
side of bottom edge of balaclava. Fold binding
to right side, turn its seam allowance under
and topstitch it to balaclava close to edge.
5
5
42
44
46
48
50
52
170196522.002.png 170196522.003.png 170196522.004.png
4b
4a
CONTROL SQUARE
size 5 x 5 cm .
You can check by measuring
the dimensions of this
control square that your
patterns have been printed
out at the correct scale. If
the dimensions are not
correct, adjust the paper
size setting on your printer
to A4 and print the patterns
out again scaled to the
correct size.
2a
3
1a
copyright © STUDIO TUUMAT OY
PL 46 90401 OULU FINLAND INFO: info@ottobre.fi
170196522.005.png 170196522.001.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin