planter-bench2.pdf

(285 KB) Pobierz
878.QXD
U-BILD
Planter Bench
Plan No. 878
Copyright U-Build, Inc., 1998.
All rights reserved. Printed in the U.S.A.
This simple and elegant planter bench project is ideal for the porch, patio or pool. Filled with plants and flowers, it will define a cor-
ner of the porch or patio with style.
Featuring all straight cuts and modular construction, the project allows the builder to decide what combination of planter boxes and
connecting benches works best for their own space. Bills of material are included for individual boxes and benches, as well as for the
combination pictured.
The planter bench as pictured is built from redwood for its beauty, strength and durability, although other woods can be substituted
if properly treated. The finished planter boxes measure about 20.5 inches square by 17 inches tall, and the benches measure 36 inch-
es long by 15 inches wide.
Bill of Material
Materials for 3 planter boxes and 2 benches
Quantity
Size
Material
Item
1
3/4Ñ x 4Ó x 8Ó
Exterior Plywood
A
2
1 1/2Ñ x 1 1/2Ñ x 8Ó
Redwood
B
15
5/8Ñ x 3 5/8Ñ x 12Ó
Redwood S4S*
C, D, E,
F, G, H, I
F
A
1 Small Box 1Ñ Finish Nails
1 Small Box 2Ñ Finish Nails
1 Small Bottle Wood Glue
1 Quart Finish
*S4S (surface four sides) material is milled smooth and is usually
5/8Ñ thick.
E
A
C
Cutting Schedule
ISOMETRIC OF
PLANTER BOX
B
D
Material for 1 box*
Part Qty
T
W
L
Material
A
2
3/4Ñ
16 7/8Ñ 16 7/8Ñ
Plywood
B
8 1 1/2Ñ 1 1/2Ñ 15 3/8Ñ
Redwood 2x2
ISOMETRIC OF
PLANTER BENCH
C
20
5/8Ñ
3 3/8Ñ
16Ñ
Redwood 1 x4 S4S**
D
4
5/8Ñ
1 3/4Ñ 19 3/8Ñ Redwood 1 x4 S4S**
E
4
5/8Ñ
1 1/4Ñ 19 3/8Ñ Redwood 1 x4 S4S**
F
4
5/8Ñ
1 3/4Ñ 20 3/8Ñ Redwood 1 x4 S4S**
G
Material for 1 bench*
G 4 5/8Ñ 3 3/8Ñ 36Ñ Redwood 1 x4 S4S**
H 5 5/8Ñ 1 1/4Ñ 13 7/8Ñ Redwood 1 x4 S4S**
I 2 5/8Ñ 2 1/2Ñ 36Ñ Redwood 1 x4 S4S**
*The planter bench as pictured has 3 boxes and 2 benches.
**S4S (surface four sides) material is milled smooth and is usually
5/8Ñ thick.
I
H
108312497.001.png
Assembly Instructions
Read all instructions before beginning any work. Cut all material to sizes shown in cutting schedule.
1. Glue and nail with 2" finish nails boards B to plywood A.
Make two units with a hole cut in the top unit for a planter
pot (see illustration 1).
2. Glue and nail with 1" finish nails boards C to plywood
frames. Lay boards out before nailing to achieve equal
spacing (see illustration 2). Check for squareness.
F
Diameter
of Pot
16 7/8
F
E
3
A
B
A
C
Illustration 1
C
A
3. Glue and finish nail with 1" finish nails boards D, E and F
as shown in illustration 1 and 2.
BD
Illustration 2
I
4. Glue and finish nail with 1" finish nails boards H
to seat slats G. Space seat slats as shown in illus-
tration 1. Lay boards out before nailing to
achieve equal spacing (see illustration 3). Check
for squareness.
H
13 7/8
G
5. Attach boards I to front and back of bench with
1" finish nails and glue. Use sufficient glue and
nails, as these are the boards that give the bench
strength. Sand and apply finish.
I
H
I
2
Illustration 3
Illustration 4
6. Sand and apply finish to assembled planter boxes and benches.
Assemble boxes and benches as shown in illustration 4.
108312497.002.png 108312497.003.png 108312497.004.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin