VONBE99GBD.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE VOLKSWAGEN MOD. NEW BEETLE YEAR 99 ﬁ

PETROL

DIESEL

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the right of the engine compartment

or, alternatively, on the support bracket of the battery.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard in the space

above the fuse box.

POWER SUPPLY

+ 30: connect to the clamp marked “+30” directly on the terminal strip located near

the relay box, under the dashboard driver’s side or, alternatively, to the

RED/GREEN wire on the coming out of the arrows switch.

- 31: connect to the shunting of the general bulks on the terminal edge of the

support of the central unit, under the dashboard, driver’s side.

IGNITION WIRE

+ 15/54: connect to the 1 mm 2 BLACK/GREEN wire located at the position nr. 2 of

the LIGHT BROWN connector marked T6, under the dashboard, driver’s side.

DIRECTION INDICATORS

Connect to the 1 mm 2 WHITE/BLACK wire or GREEN/BLACK wire located at the

positions nr. 13 and nr. 14 of the 23 way black connector marked T23 in the power

plant of the vehicle.

ELECTRIC WINDOWS

Comfort closing

The closing of the windows is obtained timing the YELLOW/BLUE doors closure

wire with a negative control signal.

CENTRAL DOORS LOCKING Negative control signal

Connect to the YELLOW/BLUE wire (lock) and WHITE/GREEN wire (unlock)

located directly in the wiring harness inside the driver’s side door.

IMMOBILISATION POINT

Gasoil pump

Cut the BLACK/VIOLET wire located at the position nr. 1 of the 6 way light brown

connector marked “T6”, on the left of the dashboard, driver’s side.

STARTER

+50: Cut the RED/BLACK wire located at the position nr. 3 of the 6 way light brown

connector marked “T6”, under the left side of the dashboard.

BONNET SWITCH

Install an additional switch on the front headlamp support plate. As this plate is

plastic made, it is necessary to make a ground connection of the switch body.

DOORS SWITCH

Connect to the BLUE/GREY wire located at the position nr. 16 of the 23 way black

connector of the central doors locking unit.

BOOT SWITCH

Connect to the BROWN/BLACK wire located at the position nr. 15 of the 23 way

black connector in the central doors locking unit.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

vonbe99gbd.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: