VOV5004GBDT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE

VOLVO

MOD.

V 50 *

YEAR 04 ﬁ

PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the support of the shock absorber, in the

engine compartment, passenger’s side.

Pass the cables using the original fairlead located behind the passenger’s side glove

compartment.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under the dashboard, passenger’s side.

POWER SUPPLY

+30: connect to the 2 mm 2 RED wire located in the wiring harness coming out of the green

connector, in the fuse box.

-31: connect to one of the ground terminals located behind the left lateral bulkhead, driver’s

side.

IGNITION WIRE

+15/54: connect to the WHITE/GREEN wire, in the wiring harness coming out of the

connector of the ignition key.

DIRECTION INDICATORS

Connect to the wires: LIGHT BLUE and LIGHT BLUE/RED in the brown connector located in

the lower part of the fuse box.

ACTIVAT./DEACTIVATION

Connections antitheft/vehicle

CONTROLS

Position

Connector central of the electric windows motor

Original open/close push-button

Car body

Supply in the fuse box

The connector of the window motor central is located inside the driver’s side door.

Refer to the “C” diagram in the dedicated installations manual inside the kit of the antitheft.

Vehicle

WHITE/BLACK

YELLOW/BLACK

RED/BLACK

Ground

positive

IMMOBILISATION POINT

Gasoil pump

Cut the WHITE/GREEN wire, at the position nr.3, in the wiring harness comig out of the

connector of the ignition key.

STARTER

+50: Cut the GREY/BLACK wire, at the position nr.2, in the wiring harness coming out of the

connector of the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the BLACK wire in the wiring harness coming out of the connector of the lamp

located under the driver’s side dashboard.

BOOT SWITCH

Connect to the BLACK/LIGHT BLUE wire in the wiring harness coming out of the connector of

the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

vov5004gbdt.doc

Art. 3800

YELLOW/BLACK

GREY/BLACK

VIOLET

ORANGE

VIOLET/WHITE

ORANGE/WHITE

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: