TOLCR03GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE TOYOTA MOD. LAND CRUISER YEAR 03 ﬁ

PETROL

DIESEL

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the support of the shock absorber,

driver’s side.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under the dashboard, on the left of the steering

column, near the fuse box.

POWER SUPPLY

+30: connect to the BLUE/WHITE wire, in the 2 way connector, located in the middle of the

fuse box, on the left of the steering column.

-31: connect to a ground terminal located behind the driver’s side bulkhead.

IGNITION WIRE

+15/54: connect to the BLUE/YELLOW wire, in the 2 way connector, located in the middle of

the fuse box, on the left of the steering column.

DIRECTION INDICATORS

Connect to the BLUE/BLACK and BLUE/YELLOW wires, in the 16 way black connector, in the

left part of the fuse box. As alternative: connect to the BLUE/BLACK and BLUE/YELLOW

wires, in the 4 way white connector, behind the fuse box.

ELECTRIC WINDOWS

It is not possible to make the connection of the electric windows as the windows central units

lose the programming.

CENTRAL DOORS LOCKING Negative control signal

Connect to the BLUE wire (lock) and to the GREEN wire (unlock) in the connector coming out

of the unlock/lock push-button on the driver’s side door.

IMMOBILISATION POINT

Fuel pump

Cut the BLACK/ORANGE wire, at the position nr.2, in the 24 way connector in the fuse box.

STARTER

+50: Cut the GREEN wire, at the position nr.8, in the 8 way white connector coming out of the

ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate.

DOORS SWITCH

Connect to the wires: WHITE/GREEN, RED/YELLOW, WHITE/GREEN, RED/YELLOW in the

22 way white connector, on the side of the fuse box. Divide the lines with 4 diodes 1N4004.

BOOT SWITCH

Connect to the RED/BLUE wire, in the 22 way white connector, on the side of the fuse box

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

tolcr03gbb.doc