MAPRE01GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAZDA

MOD. PREMACY

YEAR 01 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the support of the shock absorber, passenger’s

side.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under the dashboard, driver’s side. Pass the

cables through the original rubber core hitch located under the wheelhouse, driver’s side.

POWER SUPPLY

+ 30: connect to the WHITE/RED wire located in a multiway connector at the entrance of the

fuse box.

- 31: connect with a cable terminal directly to the car body located to the left of the dashboard,

driver’s side.

IGNITION WIRE

+ 15/54: connect to the 1 mm 2 LIGHT BLUE/WHITE wire with SILVER references located in a

connector placed behind the fuse box.

DIRECTION INDICATORS

Connect to the GREEN/WHITE wire with SILVER references and to the GREEN/BLACK wire

with SILVER references located in the wiring harness coming out of the 16 way white

connector, on the left of the release switch. Refer to the A section of diagram nr.105.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the RED/BLACK wire with SILVER references located in the wiring harness coming out of

the 12 way white connector placed on the coming out of the original push-button panel, inside

the driver’s side door.

Front window, passenger’s side:

cut the GREEN/WHITE wire with SILVER references.

Rear window, driver’s side:

cut the RED/GREEN wire with SILVER references.

Rear window, passenger’s side:

cut the LIGHT BLUE/WHITE wire with SILVER references.

The above mentioned wires are located in the wiring harness behind the sill cover, driver’s side.

CENTRAL DOORS LOCKING Negative controls

Connect to the PINK/LIGHT BLUE wires with SILVER references (lock) and LIGHT

GREEN/RED with SILVER references (unlock) located in the wiring harness behind the sill

cover, driver’s side; as alternative, in the wiring harness coming out of the 12 way white

connector, on the exit of the green central doors locking unit fixed behind the right lateral

bulkhead, passenger’s side. Refer to the D section of diagram nr.105.

IMMOBILISATION POINT 1

Fuel pump

Cut the BLACK/BLUE wire with SILVER reference located in the wiring harness behind the sill

cover, driver’s side.

IMMOBILISATION POINT 2

Locking device central unit

Cut the BLACK/WHITE wire located in the wiring harness coming out of the locking device

central unit fixed on the left of the steering column.

STARTER

+ 50: Cut the BLACK/BLUE wire located in the wiring harness coming out of the connector of

the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the WHITE/GREEN wire with SILVER reference located in the wiring harness

behind the sill cover, driver’s side.

BOOT SWITCH

Connect to the GREEN/RED wire with SILVER reference located in the wiring harness coming

out of the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

mapre01gbb.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°105

Diagram for the application on MAZDA PREMACY

A section B section

16 way white connector 12 way white connector

GREEN/BLACK/SILVER

GREEN/WHITE/SILVER BLACK/WHITE

C section D section

12 way white connector 12 way white connector

PINK/LIGHT BLUE/SILVER

RED/BLACK/SILVER

LIGHT GREEN/RED

BLUE/SILVER

RED/SILVER

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

mapre01gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: