BMSE303GBDT.PDF

(34 KB) Pobierz
BMSE303GBDT.PDF
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
MAKE
BMW
MOD.
SERIE 3*
YEAR 03
PETROL
DIESEL
X
* Models with original equipment keyless entry system.
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment, on the shock absorber,
passenger’s side.
CENTRAL UNIT POSITION
The modular systems and the modules should be positioned behind the right lateral glove compartment,
passenger’s side.
POWER SUPPLY
+ 30: connect to the 4 mm 2 WHITE/RED wire located in a multiway connector at the entrance of the fuse
box.
- 31: Connect with a cable terminal to one of the original ground terminals located behind the left lateral
bulkhead , driver’s side.
IGNITION WIRE
+ 15/54: Connect to the 2 mm 2 GREEN/RED wire located in the wiring harness behind the left lateral
bulkhead, driver’s side.
DIRECTION INDICATORS
The vehicle has the direction indicators lines divided, so connect to the following wires using 6 diodes:
(ant. left) BLUE/GREEN at the position nr.50, (ant. lat.) BLUE/YELLOW at the posiion nr.18, (post. left)
BLUE/GREEN at the position nr.1, (ant. right) BLUE/ BROWN at the position nr.11, (ant. lat.)
BLUE/YELLOW at the position nr. 3 and (ant. right) BLUE/BROWN at the position nr. 43 located in the 54
way black connector placed in the module integrated to the position/antidazzle lights control switches.
N.B. Separate the lines with 1N4004 diodes.
ELECTRIC WINDOWS
Comfort closing
Negative control signal
The locking of the electric windows is obtained timing the BLUE/RED closing wire located at the position
nr. 22 in the connector coming out of the central doors locking unit, behind the glove compartment,
passenger’s side. Refer to the fitting diagram nr.199.
ACTIVAT./DEACTIVATION
CONTROLS
Connections antitheft/vehicle
Art.38XX Vehicle Position
YELLOW/BLACK WHITE coming out central doors locking unit
GREY/BLACK LIGHT BLUE coming out central doors locking unit
VIOLET/WHITE ground car body
ORANGE ground car body
VIOLET ground car body
ORANGE/WHITE ground car body
Note: after having programmed the on/off controls of the antitheft, cut the WHITE/BLACK wire, at the
position nr. 20, in the wiring harness coming out of the 54 way black connector, in the central position on
respect of others connectors located in central locking unit placed behind the passenger’s side glove
compartment.
IMMOBILISATION POINT
Inhibiting starting central unit
Cut the 0,75 mm 2 VIOLET/BLACK wire, at the position nr.4, in the 13 way connector, coming out of the
grey central unit located on the left of the steering column, under the driver’s side dashboard.
STARTER
+50: Cut the BLACK/LIGHT BLUE wire located in the wiring harness coming out of the ignition key.
BONNET SWITCH
Install an additional switch on the front headlamp support grill, driver’s side.
DOORS SWITCH
Connect to the 0,5 mm 2 RED/BLUE wire, at the position nr.18, in the connector of the central doors locking
unit located behind the glove compartment, passenger’s side.
Attention: this is a positive control signal. It is suggested to reverse the polarity by means of a microrelay.
BOOT SWITCH
Connect to the WHITE/BROWN wire located in the wiring harness behind the sill cover, passenger’s
side.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
bmse303gbdt.doc
108354527.007.png 108354527.008.png 108354527.009.png
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM NR. 199
Diagram for the connection of Art. 1055 to make the windows locking on
BMW serie 3
Temporized relay
Central locking unit behind
passenger’s side
ART.1055
1 2 3 4 5 6 7
+30
BLUE/RED
pos. nr.22
(negative control
at antitheft on)
ground
Door switch
driver’s side
ground
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
bmse303gbdt.doc
108354527.010.png 108354527.001.png 108354527.002.png 108354527.003.png 108354527.004.png 108354527.005.png 108354527.006.png
Zgłoś jeśli naruszono regulamin