ITHACA_MODEL_37_FEATHERLIGH.PDF

Remember 9-11-01

MODEL 37™

Featherlight™

Owners Manual

Proudly Crafted in the USA

You may get more information on

Ithaca Gun®and register your new firearm’s

warranty at; www.ithacagun.com

Ithaca Gun® Company, LLC

901 Rte. 34B

King Ferry, NY 13081

315-364-7171

901 Rte. 34B

King Ferry, NY 13081

315-364-7171

Congratulations !

To activate your Warranty,mail this card to:

Ithaca Gun®Company, LLC

901 Rte. 34B

King Ferry, NY 13081

You have just bought the most reliable pump gun in America. Its

light weight gave it the name Featherlight™ more than two million

guns ago. It’s still the lightweight that lets you travel farther, shoot

quicker, finish the day fresher. Your Featherlight™ has butter-slick

pump action, the shortest throw in America. And it’s rugged.

Among the fine features of the Model 37™ that you have just

purchased are:

• Bottom ejection

• Steel receiver, except on Ultra Featherlight™ models

• Steel trigger plate

• Rifled models offer fully rifled barrels and adjustable sights or a scope

base

• Double reamed barrels for greater accuracy

• Barrel interchangeability (except Deerslayer® II& III)

Through your years of fun with your Featherlight™, use it with the

safety of others in mind.

Remember to always treat your Model 37™ as if it is loaded.

This is important information on the operation, care, and

function of your Ithaca Gun® Model 37 Shotgun. Read

this booklet thoroughly and retain for future use. If you

have any additional questions before using your gun call

our customer service number at (315) - 364 - 7171. It is

manned Monday thru Friday from 8:oo AM to 4:00 PM.

Limited Warranty

NOTE: Your Ithaca Gun® Model 37™ has been treated with protective

oils during shipping . When you receive your Model 37™ it should be

thoroughly cleaned before use. To disassemble for cleaning follow these

instructions.

THIS “LIMITED WARRANTY” HAS BEEN DRAFTED TO

COMPLY WlTH THE MAGNESON-MOSS WARRANTY

FEDERAL TRADE COMMlSSlON ACT.

Ithaca Gun® Co., LLC, warrants this firearm was manufactured

free of defects in material or workmanship; and for a period of three

(3) years after the date of purchase, the Manufacturer agrees to

correct by repair or replacement (with the same or comparable

quality model) your firearm. A service and/or handling charge may

be made. Return pre-paid to lthaca Gun® Co., LLC, Attn: Service

Department, 901 Route 34B, King Ferry, New York 13081.

THlS WARRANTY IS VOlD IF THE FlREARM HAS BEEN

ABUSED, MISUSED, DAMAGED BY ACCIDENT, FlRED

WlTH HAND LOADED AND/OR RELOADED OR

lMPROPER AMMUNITlON OR OBSTRUCTION IN THE

BARREL, OR DAMAGED BY FAlLURE TO PROVlDE

REASONABLE AND NECESSARY MAINTENANCE. THlS

WARRANTY DOES NOT APPLY TO NORMAL WEAR OF

ANY PARTS, lNCLUDlNG METAL, WOOD, PLASTIC,

RUBBER AND OTHER MATERIALS, SURFACE FlNlSH OR IF

UNAUTHORlZED REPAlR AND/OR ALTERATlON HAS

BEEN PERFORMED.

The terms of the Warranty cannot be changed except in writing by

the manager of lthaca Gun® Co., LLC.

Wholesalers and Dealers are not authorized to make any warranty

repair or adjustment on behalf of lthaca Gun® Co., LLC. This

Warranty gives only the original retail purchaser specific legal rights;

other rights may also be available which may vary from state to state.

Should service be required for this firearm, please return, giving

full detaiIs of the defect or malfunction, stating date of purchase and

dealer from whom the firearm was purchased, along with a copy of

your sales receipt.

ITHACA GUN® CO., LLC, 901 Route 34B, King Ferry,

New York 13081 (315)364-7171

Disassembly for cleaning (except Deerslayer® II& III)

1. With the safety on, keeping the

barrel pointed in a safe direction,

press back on the action release and

pull forend back to open the action

and determine that the Model

37™ is unloaded.

2. Disengage the magazine nut

from barrel lug by turning it

clockwise onto the magazine tube.

3. Remove barrel from receiver by

turning barrel 1 ⁄ 4 -turn counter

clockwise causing the lug to project

to the right and and the threads to

disengage then pull the barrel

forward and out of the receiver.

3. Clean the interior of the barrel

with a quality gun solvent and a

patch.

If your Model 37 is camouflaged be

sure to use a solvent which is

compatible with this coating.

Assembly

1. Press back on action release, pull forend back, insert barrel into

receiver with barrel lug projecting to the left.

2. Turn barrel 1 ⁄ 4 -turn to right so lug is in contact with magazine nut.

3. Turn magazine nut to left until contact is made with barrel lug and

barrel is tight with receiver.

NOTE: Do not use excessive force when tightening magazine nut.

Do not operate action with barrel removed.

Deerslayer® II& III models have fixed barrels and must be cleaned

with barrels attached.

1. With the safety on, keeping the barrel pointed in a safe direction,

press back on the action release and pull forend back to open the

action and determine that the Model 37™ is unloaded.

2. Clean the interior of the barrel with a quality gun solvent and a

patch.

If your Model 37 is camouflaged be sure to use a solvent which is

compatible with the coating.

NOTE: The Model 37™ Featherlight ™ in 12 ga. and 20 ga. is

chambered for 3" ammunition. However, 2-3/4” ammunition can be

safely used. CAUTlON - It is not recommended to fire 3" ammuni-

tion In the Ultra Featherlight ™ models because of the heavy recoil.

(The Ultra Featherlight ™ includes ‘ULT’ as part of the serial

number.)

Care and Maintenance

1. Always remove barrel from receiver and clean from breech end.

(except Deerslayer® II& III)

2. An occasional cleaning of the action is recommended using a

light coating of oil.

DO NOT OVER-OIL ACTlON PARTS.

3. If action takedown should ever be required, use a qualified

gunsmith or return to Ithaca Gun® Company, LLC.

Storage

If your Model 37™ is going to be stored for an extended period of

time, re-oil all interior and exterior surfaces with a quality gun oil.

If your Model 37™ is camouflaged be sure to use a gun oil which is

compatible with this coating.

Loading and Unloading

Whenever you handle your Model 37™always treat it as if it is

loaded. Always keep the barrel pointed in a safe direction.

1. To load put safety on “safe” position so that the red indication is

not visible by pushing from left to right. (Reverse this for left-handed

safety.)

2. To load magazine, close action by pushing forend forward into the

locked position.

3. Place shell in bottom opening and push forward past shell stop.

Repeat until magazine takes 4 rounds of 2-3/4” shells or 3 rounds of

3” shells, (without plug).

4. Press action release, pull forend fully to the rear to release shell

from magazine, then push forward until it locks in the battery posi-

tion.

5. An additional shell may now be placed in the magazine for full

capacity.

6. To unload magazine, press down on magazine shell stop.

7. To unload chamber, push action release and pull forend fully to the

rear ejecting the shell onto the ground.

Migratory Bird Plug

To install the 3-shot Federal Migratory Bird Law plug, follow the

instructions in the Disassembly section to remove the barrel, unscrew

and remove magazine nut, then remove magazine spring. Place whole

plug inside spring. Making sure magazine cup is in magazine, replace

spring, plug, and magazine cap. Reassemble using instructions in this

manual.

SPECIFICATIONS

FEATHERLIGHT ™

Gauge: 12 or 20

Chamber: 3"

Specifications Stock Length: 14"

Weight: 6 3 ⁄ 4 to 7 lbs.

FEATHERLIGHT ™

Gauge: 16

Chamber: 2 3 ⁄ 4 "

specifications Stock Length: 14"

Weight: 6 3 ⁄ 4 to 7 lbs.

Ultra Featherlight™ models weigh approximately 1-1/2 lbs. less

Deerslayer® III models weigh 9-1/2 to 10-1/2 lbs.

Youth Models have a 12-3/4” Stock Length

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: