README_Belinea.TXT

(5 KB) Pobierz
Installing the Belinea.inf for Microsoft Windows.
The following installation instructions are for Windows 98/98/MW/2000/XP.

For Installation with Windows 2000 and Windows XP you may need administration rights. In this case
please contact your administrator.

If your Windows 5/98/ME/2000/XP version is different or you need more detailed installations information,
please refer to Windows 95/98/ME/2000/XP user�s manual.



Installing the BELINEA.INF for Windows 95 
---------------------------------------------------------------------------------------------------------
To install a Belinea monitor for Windows 95 with the BELINEA.INF file, please
proceed as follows:

1. Click on "START"->"SETTINGS"->"CONTROL PANEL".
2. Now, click on "DISPLAY" icon, then "SETTINGS"->"ADVANCED PROPERTIES"->"MONITOR"->"CHANGE".
3. You will see a button named "HAVE DISK". Click on it and after that select "BROWSE".
   Now, you have to find the appropriate drive and directory in which you put the Belinea_xxx.inf, 
   click on "OK" and in the next window, click "OK" again.
4. A list with all supported Belinea monitors will appear. Select your monitor type and click "OK".
5. Click "CLOSE" button. Now the inf file for your monitor is installed.



Installing the BELINEA.INF for Windows 98
---------------------------------------------------------------------------------------------------------
To install a Belinea monitor for Windows 98 with the BELINEA.INF file, please
proceed as follows:

1. Click on "START"->"SETTINGS"->"CONTROL PANEL".
2. Now, click on "DISPLAY" icon, then "SETTINGS"->"ADVANCED PROPERTIES"->"MONITOR"->"CHANGE"->"NEXT".
3. You will see a window named "DRIVER UPDATE ASSISTANT". Choose "Display a list of all the drivers
   in a specific location, so you can select the driver you want." and click "NEXT".
4. Click on "HAVE DISK".
5. Click "BROWSE" button then choose the appropiate drive and directory in which you put the Belinea_xxx.inf,
   double click "OK".
6. A list with all supported Belinea monitors will appear. Select your monitor type and double click "NEXT".
7. Click "FINISH" button. Now the inf file for your monitor is installed.


Installing the BELINEA.INF for Windows ME
---------------------------------------------------------------------------------------------------------
To install a BELINEA monitor for Windows ME with the BELINEA.INF file, please
proceed as follows:

1. Click on "START"->"SETTINGS"->"CONTROL PANEL".
2. Now, click on "DISPLAY" icon, then "SETTINGS"->"ADVANCED"->"MONITOR"->"PROPERTIES"->"CHANGE".   
3. You will see to the assistant for updating device driver, please follow the instructions.	
4. Choose "Specify the location of the driver (Advanced)" and click the "NEXT" button.
5. Choose "Display a list of all the drivers in a specific location so you can select the driver you
   want." then click "NEXT" and the "HAVE DISK" button.
6. Click "BROWSE" button then choose the appropiate drive and directory in which you put the Belinea_xxx.inf,
   double click "OK".
7. A list with all supported Belinea monitors will appear. Select your monitor type and double click "NEXT".
8. Click "FINISH" button. Now the inf file for your monitor is installed.


Installing the BELINEA.INF for Windows 2000
---------------------------------------------------------------------------------------------------------
To install a BELINEA monitor for Windows 2000 with the BELINEA.INF file, please
proceed as follows:

1. Click on "START"->"SETTINGS"->"CONTROL PANEL".
2. Now, click on "DISPLAY" icon, then "SETTINGS"->"ADVANCED"->"MONITOR"->"PROPERTIES"->"DRIVER"->"DRIVER UPDATE".
3. You will see the assistant for updating device driver, please follow the instructions.
4. Choose "Dislay a list of the known drivers for this device so that I can choose a specific driver" then click
   "NEXT" and "HAVE DISK".
5. Click "BROWSE" button then choose the appropiate drive and directory in which you put the Belinea_xxx.inf,
   double click "OK".
6. Click the "OPEN" button, then click the "OK" button.
7. A list with all supported Belinea monitors will appear. Select your monitor type and double click "NEXT".
8. Click "FINISH" button then "CLOSE". If you can see the "Digital Signature Not Found" window the click the
   "YES" button. Now the inf file for your monitor is installed.



Installing the BELINEA.INF for Windows XP
---------------------------------------------------------------------------------------------------------
To install a BELINEA monitor for Windows XP with the BELINEA.INF file, please
proceed as follows:

1. Click "START"->"CONTROL PANEL"
2. Now, click on "DISPLAY" icon, then "SETTINGS"->"ADVANCED"->"MONITOR"->"PROPERTIES"->"DRIVER"->"DRIVER UPDATE".
3. Choose "Install from a list or specific location ( advanced )", than click "NEXT" button.
4. Choose the "Don�t Search. I will choose the driver to install" button and click "NEXT".
5. Click the "HAVE DISK" button and than the "BROWSE" button.
6. Choose the appropiate drive and directory in which you put the Belinea_xxx.inf, than click "OPEN" and "OK".
7. A list with all supported Belinea monitors will appear. Select your monitor type and double click "NEXT".
8. Click "FINISH" button and than the "CLOSE" button. Now the inf file for your monitor is installed.



-------------------
(c)KLB,CHR,MW/MAXDATA 1999-2002
Zgłoś jeśli naruszono regulamin