podkaszarka ryobi RY30530.pdf

OPERATOR’S MANUAL

30cc String Trimmers and Brushcutters

SS30

RY30140

CS30

RY30120

BC30

RY30160

Your new trimmer has been engineered and manufactured to our high standard for dependability, ease of operation, and

operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before

using this product.

Thank you for your purchase.

SAVE THIS MANUAL FOR FUTURE REFERENCE

TABLE OF CONTENTS

 Introduction ..................................................................................................................................................................... 2

�  General Safety Rules ....................................................................................................................................................... 3

�  Specific Safety Rules ...................................................................................................................................................... 4

�  Symbols .....................................................................................................................................................................5 - 6

��  Features .....................................................................................................................................................................7 - 9

�  Assembly ..................................................................................................................................................................9 - 14

�  Operation ................................................................................................................................................................14 - 18

�  Maintenance .........................................................................................................................................................19 - 21

�  Troubleshooting ......................................................................................................................................................22 - 23

�  Warranty .................................................................................................................................................................23 - 25

�  Service Parts ....................................................................................................................................................Back Page

INTRODUCTION

This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability

have been given top priority in the design of this product making it easy to maintain and operate.

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all

instructions listed below may result in electric shock, fire

and/or serious personal injury.

�  Do not touch area around the muffler or cylinder of the

unit, these parts get hot from operation.

 Always stop the engine and remove the spark plug wire

before making any adjustments or repairs except for

carburetor adjustments. Wear your protective equipment

and observe all safety instructions. When the unit is turned

off, make sure the cutting attachment has stopped before

setting the unit down.

 Inspect the unit before each use for loose fasteners, fuel

leaks, etc. Replace any damaged parts before use.

 The string head or blade will rotate during carburetor

adjustments.

 It has been reported that vibrations from hand-held tools

may contribute to a condition called Raynaud’s Syndrome

in certain individuals. Symptoms may include tingling,

numbness, and blanching of the fingers, usually apparent

upon exposure to cold. Hereditary factors, exposure to

cold and dampness, diet, smoking, and work practices

are all thought to contribute to the development of these

symptoms. It is presently unknown what, if any, vibrations

or extent of exposure may contribute to the condition.

There are measures that can be taken by the operator to

possibly reduce the effects of vibration:

a) Keep your body warm in cold weather. When oper-

ating the unit wear gloves to keep hands and wrists

warm. It is reported that cold weather is a major factor

contributing to Raynaud’s Syndrome.

b) After each period of operation, exercise to increase

blood circulation.

c) Take frequent work breaks. Limit the amount of

exposure per day.

d) Keep the tool well maintained, fasteners tightened,

and worn parts replaced.

If you experience any of the symptoms of this condition,

immediately discontinue use and see your physician about

these symptoms.

 Mix and store fuel in a container approved for gasoline.

�  Mix fuel outdoors where there are no sparks or flames.

Wipe up any fuel spillage. Move 30 ft. (9 m) away from

refueling site before starting engine. Slowly remove the

fuel cap after stopping engine. Do not smoke when

refueling.

 Stop the engine and allow to cool before refueling or

storing the unit.

 Allow the engine to cool; empty the fuel tank and secure

the unit from moving before transporting in a vehicle.

READ ALL INSTRUCTIONS

 For safe operation, read and understand all instructions

before using this product. Follow all safety instructions.

Failure to follow all safety instructions listed below, can

result in serious personal injury.

 Do not allow children or untrained individuals to use this

unit.

 Never start or run the engine in a closed or poorly venti-

lated area; breathing exhaust fumes can kill.

 Clear the work area before each use. Remove all objects

such as rocks, broken glass, nails, wire, or string which

can be thrown or become entangled in the cutting line

or blade.

 Wear safety glasses or goggles that are marked to comply

with ANSI Z87.1 standard when operating this product.

 Wear heavy, long pants, boots, and gloves. Do not wear

loose fitting clothing, short pants, sandals, or go barefoot.

Do not wear jewelry of any kind.

 Product users on United States Forest Service land,

and in some states, must comply with fire prevention

regulations. This product is equipped with a spark arrestor;

however, other user requirements may apply. Check with

your federal, state, or local authorities.

 Never operate this unit on the operator’s left side.

�  Secure long hair above shoulder level to prevent

entanglement in moving parts.

�  Keep all bystanders, children, and pets at least 15 m

(50 ft.) away. Bystanders should be encouraged to wear

eye protection.

�  Do not operate this unit when you are tired, ill, or under

the influence of alcohol, drugs, or medication.

�  Do not operate in poor lighting.

�  Keep firm footing and balance. Do not overreach.

Overreaching can result in loss of balance or exposure

to hot surfaces.

�  Keep all parts of your body away from any moving

part.

�  To avoid hot surfaces, never operate the unit with the

bottom of the engine above waist level.

SPECIFIC SAFETY RULES

SPECIFIC SAFETY RULES FOR TRIMMER

USE

 Replace string head if cracked, chipped, or damaged

in any way. Be sure the string head or blade is properly

installed and securely fastened. Failure to do so can cause

serious injury.

 Make sure all guards, straps, deflectors, and handles are

properly and securely attached.

 Use only the manufacturer’s replacement string in the

cutting head. Do not use any other cutting attachment.

To install any other brand of cutting head to this string

trimmer can result in serious personal injury.

 Never operate unit without the grass deflector in place

and in good condition.

 Maintain a firm grip on both handles while trimming.

Keep string head below waist level. Never cut with the

string head located over 76 cm (30 in.) or more above the

ground.

released. Maintain proper control until the blade has

completely stopped rotating.

 Replace any blade that has been damaged. Always make

sure blade is installed correctly and securely fastened

before each use. Failure to do so can cause serious

injury.

 Use only the manufacturer’s replacement Tri-Arc ® blade

intended for use on this brushcutter. Do not use any other

blade. To install any other brand blade or cutting head to

this brushcutter can result in serious personal injury.

 The Tri-Arc ® blade is suited for cutting thicker weeds or

pulpy stalks only. Do not use for any other purpose. Never

use the Tri-Arc ® blade to cut woody brush.

 Exercise extreme caution when using the blade with this

unit. Blade thrust is the reaction that may occur when

the spinning blade contacts anything it cannot cut. This

contact may cause the blade to stop for an instant, and

suddenly “thrust” the unit away from the object that was

hit. This reaction can be violent enough to cause the op-

erator to lose control of the unit. Blade thrust can occur

without warning if the blade snags, stalls, or binds. This is

more likely to occur in areas where it is difficult to see the

material being cut. For cutting ease and safety, approach

the weeds being cut from the right to the left. In the event

an unexpected object or woody stock is encountered, this

could minimize the blade thrust reaction.

 Never cut any material over 13 mm (1/2 in.) diameter.

 Always wear the shoulder harness when using the brush-

cutter and adjust to a comfortable operating position.

Maintain a firm grip on both handles while cutting with a

blade. Keep the blade away from your body and below

waist level.

 Never use the brushcutter with the blade located 76 cm

(30 in.) or more above the ground level.

SPECIFIC SAFETY RULES FOR BRUSH-

CUTTER AND BLADE USE

 After engine stops, keep rotating blade in thicker weeds

or pulpy stalks until it stops.

 Do not operate the brushcutter unless the brushcutter

guard is firmly secured in place and in good condition.

 Use heavy gloves when operating the brushcutter and

when installing or removing blades.

 Always stop the engine and remove the spark plug wire

before attempting to remove any obstruction caught or

jammed in the blade or before removing and installing

the blade.

 Do not attempt to touch or stop the blade when it is

rotating.

 A coasting blade can cause injury while it continues

to spin after the engine is stopped or throttle trigger

SYMBOLS

Some of the following symbols may be used on this tool. Please study them and learn their meaning for safe operation

of this product.

SYMBOL

NAME

EXPLANATION

Safety Alert Symbol

Precautions that involve your safety.

Read the Operator’s Manual

To reduce the risk of injury, user must read and under-

stand operator’s manual before using this product.

Wear Eye and Hearing Protection

Wear eye protection which is marked to comply

with ANSI Z87.1 as well as hearing protection when

operating this equipment.

50' 15m

Keep Bystanders Away

Keep all bystanders at least 50 ft. (15 m) away.

Ricochet

Thrown objects can ricochet and result in personal

injury or property damage.

No Blade

Do not install or use any type of blade on a product

displaying this symbol.

Blade Thrust

Beware of blade thrust. Products authorized for blade

use will display this symbol to warn of blade thrust.

Gasoline and Oil

Use unleaded gasoline intended for motor vehicle use

with an octane rating of 87 ([R + M] / 2) or higher. This

product is powered by a 2-cycle engine and requires

pre-mixing gasoline and 2-cycle oil.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: