wahadłowiec instrukcja budowy.pdf

(1838 KB) Pobierz
C:\Documents and Settings\Owner\My Documents\Space files\Temporary\websitestuff\144stsmodel\stsassembly.prn.pdf
1:144 Space Shuttle Paper model Assembly
You need: White glue, a craft knife, ruler, tweezers, a cutting mat, and very, very
important……..PATIENCE.
For beginners is best to learn basic techniques for papermodeling before this assembly.
You can check in the Internet.
The following pages show a sequence of photos as a guide to build this model. This
applies to all closed-payload bay Shuttle models .
312571860.028.png 312571860.029.png
The payload bay box is a key element. Glue the numbered tabs with the correspondent
numbers in the dashed areas.
These tabs secure the front bottom. This is how it will look when correctly glued.
Note the curved front bottom. (This is key) Reinforcers
312571860.030.png 312571860.031.png 312571860.001.png 312571860.002.png 312571860.003.png 312571860.004.png 312571860.005.png
Glue the payload box on top of this part. Make pressure to form a curved front bottom.
This is how it will look.
Prepare this structure that will give shape to the crew cabin.
.
These 2 parts are never glued. They will
“float” on top of the other
Note how the small tabs are folded. The
front ones are folded backwards and the
center ones will be opposite to each
other.
312571860.006.png 312571860.007.png 312571860.008.png 312571860.009.png 312571860.010.png 312571860.011.png 312571860.012.png 312571860.013.png
This is how it will look. .
Crew cabin and payload box need to be
glued perfectly as photo show.
Give a curved shape to this part.
Align the lines for symmetry.
The walls are folded on this line.
Fold tabs towards the front.
Glue both ends A and D. The walls need to be glued too. Let it dry.
312571860.014.png 312571860.015.png 312571860.016.png 312571860.017.png 312571860.018.png 312571860.019.png 312571860.020.png
These are other views of this step.
Now lets prepare the Shuttle cabin!
Fold between these 2 points.
Note that the walls are flat straight. Only
the upper section is given a rounded
shape.
This area is curved.
Align the lines for symmetry.
These 2 parts need to touch in the line.
How it looks from below. Note that the
black flaps will not touch each other.
312571860.021.png 312571860.022.png 312571860.023.png 312571860.024.png 312571860.025.png 312571860.026.png 312571860.027.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin