TEN PLUGIN TO KLON LIMITERA WAVES L1-LIMITER (NIE MYLIÆ Z L1-ULRAMAXIMIZER) CHYBA NIE MA W£ASNEJ SKÓRKI I U¯YWA DOMYŒLNYCH SKÓREK HOSTA. WERSJA ZE SKÓRK¥ TO PLUGIN Z "The BetabugsAudio" POD NAZW¥ "W1 Limiter (BBA)" TU JEST STRONA AUTORA NA KTÓREJ NIE MA SKÓRKI: http://www.yohng.com/software/w1limit.html A TU STRONA NA KTÓREJ TEN SAM PLUGIN MA JU¯ SKINA: http://www.betabugsaudio.com/plugs.php Please note - obsolete versions of W1 limiter are available for download. This soon is going to be updated. W1 Limiter is a clone of Waves L1, with identical output. This was accomplished without reverse engineering Waves products, and the result was obtained by adjusting 4Front YLimiter, by doing the following: Simplifying release curve Increasing release time 3 times (see notes below) Altering softening circuit filter Waves L1 famous limiter (and thus W1 - for compatibility reasons) uses three times longer actual release time than standard RT60 metric. This means that if you set 50ms release in the limiter, it will actually yield with 150ms standard RT60 release time. Different engineers recommend different values for release time, the default value is chosen reasonably to provide a smooth limiting for most typical usage of the limiter. If one is not experienced with limiters, it is recommended to keep the default release time. -------------------------------- W1 Limiter is a "brickwall limiter" that is a clone of Waves L1-Ultramaximizer, with "identical output". Waves' L1 (and thus W1 - for compatibility reasons) uses three times longer actual release time than standard RT60 metric. This means that if you set 50ms release in the limiter, it will actually yield with 150ms standard RT60 release time. NOTE: W1 uses the plug-in host's default interface.
snoof