SL1200GLD.PDF
(
767 KB
)
Pobierz
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
Turntable System
Operating Instructions
Model No.
SL-1210M5G
SL-1200GLD
Before connecting, operating or adjusting this prod-
uct, please read these instructions completely.
Please keep this manual for future reference.
PP
RQT7021-1Y
Supplied accessories
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when ask-
ing for replacements parts.
(Only for U.S.A.)
To order accessories contact 1-800-332-5368 or the
website (http://www.pasc.panasonic.com).
Turntable ................. 1pc.
SL-1210M5G(SFTE172-01Z1)
SL-1200GLD(SFTE172-02Z)
The illustrations and photograph in this manual are of the SL-
1210M5G model.
Balance weight ....... 1pc.
SL-1210M5G(SFPWG17201BK)
SL-1200GLD(RYQ0156-N)
Table of contents
Supplied accessories ................................................................... 2
IMPORTANT SAFETY INSTRUCTIONS ....................................... 3
Features ......................................................................................... 4
Preparation of the cartridge ........................................................ 4
Controls ......................................................................................... 4
Putting the player together ......................................................... 5
Connections and installation ...................................................... 5
Connecting to an amplifier and AC power supply cord ............. 5
Connecting to an Audio Mixer (not included) ............................ 6
Installation .................................................................................. 6
Preparatory adjustments ............................................................. 6
Horizontal balance and stylus pressure .................................... 6
Anti-skating ................................................................................ 7
Armlift height .............................................................................. 7
Tone arm height ......................................................................... 7
Fit the dust cover ....................................................................... 7
Playing records ............................................................................. 8
Adjustments while using the unit ............................................... 9
Pitch control ............................................................................... 9
Adjusting tone arm horizontal weight to reduce skipping when
scratch playing. .......................................................................... 9
Adjusting the turntable brake speed .......................................... 9
Maintenance ................................................................................ 10
Product service ........................................................................... 10
Troubleshooting guide ................................................................ 11
Specifications .............................................................................. 11
Auxiliary weight ...... 1pc.
SL-1210M5G(SFPWG17202)
SL-1200GLD(RFE0024)
Turntable mat .......... 1pc.
SL-1210M5G/SL-1200GLD
(RGS0008)
EP record adaptor .. 1pc.
SL-1210M5G(SFWE010A)
SL-1200GLD(SFWE010B)
Disc slip sheet set (included
only with SL-1210M5G) .... 1
(RGS0005Z-1)
•Disc slip sheet
•Transparent sheet
Shell weight ............ 1pc.
SL-1210M5G/SL-1200GLD
(SFPZB3501)
Overhang gauge ..... 1pc.
SL-1210M5G/SL-1200G
L
D
(SFK0135-01)
Golden slip sheet (included
only with SL-1200GLD) .. 2
(RGS0012Z)
Dust cover ............... 1pc.
SL-1210M5G(RYF0370A-X)
SL-1200GLD(RGD0078AZ-T)
Screw set for cartridge .. 1
SL-1210M5G/SL-1200GLD
•Nuts(RHN26003)
•Screws-short(SFCZV8801-1)
•Screws-long(SFPEV9801-1)
•Washers(SFPEW9601)
User memo:
Head shell (with stylus
weight) ..................... 1pc.
SL-1210M5G(SFPCC31006K)
SL-1200GLD(SFPCC31007K)
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
Sticker ...................... 1pc.
SL-1210M5G(RQLC0142-1)
SL-1200GLD(RQLC0111-1)
A cartridge is not included.
TELEPHONE NUMBER
Although the AC power switch is in the “off” position, the
unit is not completely disconnected from the mains.
Remove the plug from the main electrical outlet if you will
not be using the unit for an extended period of time. Place
the unit so the plug can be easily removed.
The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.
MODEL NUMBER
SL-1210M5G/SL-1200GLD
The following mark and symbols are located on bottom of the unit.
SERIAL NUMBER
CAUTION
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of suffi-
cient magnitude to constitute a risk of electric shock
to persons.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN
ANOTHER CONFINED SPACE. ENSURE THE
UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD
DUE TO OVERHEATING, ENSURE THAT
CURTAINS AND ANY OTHER MATERIALS DO
NOT OBSTRUCT THE VENTILATION VENTS.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
2
RQT7021
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1)
Read these instructions.
11)
Only use attachments/accessories specified by the manufac-
turer.
2)
Keep these instructions.
12)
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
13)
Unplug this apparatus during lightning storms or when unused
for long periods of time.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
14)
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normal-
ly, or has been dropped.
8)
Do not install near any heat sources such as radiators, heat reg-
isters, stoves, or other apparatus (including amplifiers) that pro-
duce heat.
9)
Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10)
Protect the power cord from being walked on or pinched particu-
larly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
CAUTION:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
¡
Reorient or relocate the receiving antenna.
¡
Increase the separation between the equipment and re-
ceiver.
¡
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
¡
Consult the dealer or an experienced radio/TV technician
for help.
Any unauthorized changes or modifications to this
equipment would void the user’s authority to operate this
device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
3
RQT7021
Features
Controls
A masterpiece amongst turntables with a worldwide repu-
tation.
Highly accurate turntable speed maintained continuously
with a quartz pitch control.
•
The [
±
16/
±
8] button can control a wide range between –8 % and
+8 % and –16 % and +16 %.
The [
±
16/
±
8] indicator LED illuminates in the dark.
•
The pitch can be varied throughout the range maintaining perfect
accuracy.
•
Pitch can be instantly reset to the rated speed (33 1/3 or 45 r/min)
with the reset button.
•
The pitch control slider can be easily replaced.
The direct drive produces high torque.
•
Wow and flutter below 0.01 %. Starting torque of 1.5 k
g
-cm en-
abling the turntable to reach 33 1/3 r/min in 0.7 seconds.
•
Smooth stops are achieved with a fully electronic braking system.
The braking speed can be adjusted with the brake speed control
knob.
Tone arm with gimbal suspension
•
Using the balance weight control measurement units on the tone
arm, you can quickly change stylus pressure settings to the appro-
priate pressure.
•
Stylus skipping can be reduced using horizontal weight control for
scratch play.
•
The tone arm can be finely adjusted in a range of 6 millimeters
with the lockable height control.
Anti-vibration design with 3 layer cabinet construction
and large insulating legs.
Pop-up stylus light.
•
A blue LED light illuminates the stylus.
No. Name Reference page(s)
EP record adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Turntable base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Turntable mat (Or disc slip sheet) . . . . . . . . . . . . . . 5
Turntable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Center spindle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Strobe mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Power switch (power) . . . . . . . . . . . . . . . . . . . . . . . . 8
Strobe light, pilot lamp . . . . . . . . . . . . . . . . . . . . . . . 8
Start-stop button (start-stop) . . . . . . . . . . . . . . . . . . 8
Speed select buttons (33, 45) . . . . . . . . . . . . . . . . . . 8
Shell stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Arm-height control . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Horizontal weight control knob . . . . . . . . . . . . . . . . 9
Balance weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Stylus pressure control . . . . . . . . . . . . . . . . . . . . . . . 6
Arm lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Anti-skating control . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cue lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Arm clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Arm rest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tone arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pitch indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Pitch control (pitch adj.) . . . . . . . . . . . . . . . . . . . . . . 9
Locking nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Head shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Reset button (reset) . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Variable range pitch button (
Preparation of the cartridge
1
Attach a cartridge (not included).
Follow the cartridge’s instructions to correctly attach it to the
head shell.
•
Use the included shell weight when using a light cartridge
(3.5 to 6.5 grams).
•
Remove the stylus weight.
Using the stylus weight (
page 6).
Stylus weight
Screws
Head shell
Shell
weight
Lead wire
Terminal
8) . . . . . . . . . . . . 9
Stylus light switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Stylus light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
±
16/
±
Cartridge
Stylus
2
Adjust the overhang.
Fit the included overhang gauge to the head shell. Adjust the
overhang and facing of the cartridge and tighten the screws.
•
Line the stylus tip up with the end of the gauge.
•
The cartridge should be parallel on the shell head.
Screws
Overhang
gauge
Stylus tip
52 mm
4
RQT7021
Putting the player together
1
Fit the turntable and turntable mat.
Put the turntable on the center spindle and then lay the mat
on top.
•
Be very careful when putting the turntable on the main unit.
The magnet on the bottom of the turntable is finely adjusted
and sharp contact can cause it to move and lead to poor
operation. Ensure the magnet remains free from dust and
iron particles.
•
Do not adjust the screws attaching the magnet to the turn-
table. The rated performance of the unit cannot be guaran-
teed if the magnet is moved.
In order to prevent damage during shipping some of the equipment
has been disassembled.
Put the player together in the following order.
•
Do not connect the AC power supply cord until set up is complete.
•
Leave the dust cover off until set up and adjustments are com-
plete.
1
Turntable mat
2
Attach the head shell.
Fit the head shell into the tone arm, keep it horizontal and
tighten the locking nut.
Turntable
Magnet
Locking nut
Head shell
Screws
3
3
Attach the balance weight to the rear
of the tone arm.
If the cartridge weighs between 10 and 13 grams, attach the
included auxiliary weight to the main balance weight.
Center spindle
Tone arm
Balance weight
Auxiliary weight
Connections and installation
Connecting to an amplifier and AC power supply cord
1. Connect the PHONO earth lead and stereo PHONO
cables to the amplifier PHONO terminals.
Amplifier
(not included)
SIGNAL GND
White (L)
Stereo connection cable
Red (R)
•
If the earth lead isn’t connected, a hum will be heard from the
AC power source.
•
You will not have adequate volume or sound quality if connect-
ing to an amplifier that has no PHONO terminals.
This unit
PHONO
TUNER
(L) (R)
1
To household
AC outlet
2. Connect the AC power supply cord.
•
Connect this cord only after all other connections are complete.
•
Confirm the wattage of AC outlets on amplifiers and receivers
before using them for this unit. This unit consumes 14.5 W.
Earth lead
2
Stereo connection cable
5
RQT7021
Plik z chomika:
megasite
Inne pliki z tego folderu:
technics_sl-1200ltd_sch_[ET].pdf
(600 KB)
ve_technics_sl1200_ltd_service.pdf
(5892 KB)
SL1200GLD.PDF
(767 KB)
Technics sl-1200 Ltd Service Manual eng.pdf
(8401 KB)
Technics sl-1200 Ltd schematy.pdf
(600 KB)
Inne foldery tego chomika:
AUDIO 1995-2004 [ISO]
AUDIO Testy to nie wszystko [ISO]
AUDIO urządzenia roku 2007
Bowers & Wilkins
Denon
Zgłoś jeśli
naruszono regulamin