Honda Universal Adapter Accord & Acura Series.pdf

Honda Universal

Adapter

(Accord & Acura Series)

For: • Universal Anchoring System

• Universal Measuring System

Pinchweld Stands

USERS MANUAL

Part No. 150085

2006 © Chief Automotive Technologies, Inc.

Chief’s Limited One-Year

Warranty & Liability

CHIEF'S LIMITED ONE-YEAR

WARRANTY & LIABILITY

Chief Automotive Technologies, Inc. warrants for one year from date of installation

and/or purchase any of its products which do not perform satisfactorily due to defect

caused by faulty material or workmanship. Chief’s obligation under this warranty is

limited to the repair or replacement of products which are defective and which have not

been misused, carelessly handled, or defaced by repair or repairs made or attempted by

others.

CHIEF AUTOMOTIVE TECHNOLOGIES, INC. DOES NOT ASSUME

RESPONSIBILITY FOR ANY DEATH, INJURY OR PROPERTY DAMAGE

RESULTING FROM THE OPERATOR’S NEGLIGENCE OR MISUSE OF THIS

PRODUCT OR ITS ATTACHMENTS. CHIEF MAKES NO WRITTEN,

EXPRESS OR IMPLIED WARRANTY WHATSOEVER OF MERCHANTABIL-

ITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE

REGARDING THE EQUIPMENT OR ANY PART OF THE PRODUCT OTHER

THAN THE LIMITED ONE-YEAR WARRANTY STATED ABOVE.

HONDA UNIVERSAL ADAPTER

ACCORD AND ACURA SERIES

Specially designed adapters are used in conjunc-

tion with Universal Anchoring System (UAS)

stands and Universal Measuring System (UMS)

pinchweld stands when securing vehicles with hor-

izontal pinchwelds and vertical jack tabs in the cor-

ners of their center sections. (All Honda / Accord /

Acura vehicles excluding Odessey.) These

adapters allow the positioning of vertical jack tabs

into a slot on the adapter’s top surface, and the

attachment of 4 inch clamps to horizontal pinch-

welds.

11 1/4"

(286mm)

The Honda adapters attach to UAS stands in two

ways dependent upon anchoring tube used.

Figure 1 shows attachment to the ears of a UAS

clamp bar tube. Figure 2 shows attachment to the

vertical surface of a UMS adapter tube. Figure 3

shows attachment to the vertical surface of a UMS

pinchweld stand. Each illustration shows the

Honda adapter in its lowest mounted position.

Figure 1

IMPORTANT: Information on use of anchor-

ing stands (including their attachment to repair

system mainframes) appears in the UAS Users

Manual and UMS Pinchweld Stand Users

Manual.

11 1/4” 12”

(286mm) (305mm)

Spacers are provide with Honda adapters which

allow height adjustment of horizontal clamps. The

spacers, positioned between top surface of

adapter and bottom surface of lower clamp half,

are provided in these thicknesses: 1/8” (3.17mm),

1/4” (6.35mm), 1/2” (12.7mm), and 1“ (25.4mm).

This manual identifies the correct spacer(s) to use

for each Honda / Accord / Acura vehicle. (See fol-

lowing pages.) Use the identified spacer(s) regard-

less of the anchoring setup and observe the fol-

lowing when applicable.

Figure 2

• When using UMS adapter tubes in UAS stands,

use not only the identified spacer(s) but also

adjust vehicle’s specified datum height 3/4”

(19mm).

11” 11.75”

(279mm) (298mm)

• When using UMS pinchweld stands,use not only

the identified spacer(s), but also adjust vehicle’s

specified datum height 1/2” (12.7mm).

Figure 3

HONDA UNIVERSAL ADAPTER

ACCORD AND ACURA SERIES

Ref. Vehicle Description

Page No.

HO-30

Accord (all models) 1990-93

HO-31

Civic 3 Door 1992-95

HO-32

Civic 4 Door & 2 Door Coupe 1992-95

HO-33

Prelude 1992-96

HO-34

Civic De Sol 1993-

HO-35

Accord (all models) 1994-97

HO-37

Accord D Door (6 cylinder) 1995-97

HO-38

Civic 2 Door & 4 Door 1996-

HO-39

Civic 3 Door 1996-

HO-40

Prelude 1997-

HO-43

Accord 2 Door (4 cylinder) 1998-

HO-44

Accord 2 Door (6 cylinder) 1998-

HO-45

Accord 4 Door (4 cylinder) 1998-

HO-46

Accord 4 Door (6 cylinder) 1998-

HO-47

CR-V 5 Door 2 WD 1997-

AC-10

Acura Legend Coupe 1991-95

AC-11

Acura Legend Sedan 1991-95

AC-12

Acura Vigor 1992-95

AC-13

Acura NSX 1991-

AC-14

Acura Integra 3 Door 1994-

AC-15

Acura Integra 4 Door 1994-

AC-16

Acura 2.5 TL 1996-

AC-17

Acura 3.2 TL 1996-

AC-18

Acura 2.2 CL 1997-

AC-19

Acura 3.5 RL 4 Door 1996-

AC-20

Acura 3.0 CL Coupe 1997-

AC-21

Acura NSX Convertible 1995-

HO - 47

AC - 18

AC - 20

11 1/4” 12 1/4”

(286mm) (311mm)

HONDA UNIVERSAL ADAPTER

ACCORD AND ACURA SERIES

HO - 31

HO - 32

HO - 40

AC - 14

AC - 15

AC - 16

AC - 17

1/4” (6.4mm)

1 1/4” (31.8mm)

Front Setup and Rear Setup

HO - 35

HO - 37

HO - 43

HO - 45

HO - 46

1 1/4” (31.8mm)

1/4” (6.4mm)

1/8” (3.18mm)

1 1/8” (28.6mm)

Front Setup

Rear Setup

HO - 33

HO - 38

HO - 39

HO - 44

HO - 45

1 1’4“ (31.8mm)

1/4”(6.4mm)

3/8” (9.5mm)

1 3/8”

Front Setup

Rear Setup

HO - 30

1 5/8” (41.4mm)

5/8” (15.9mm)

1 1/2” (38mm)

1/2” (12.7mm)

Front Setup

Rear Setup

HO - 34

1/2” (12.7mm)

1 1/2” (38mm)

Front Setup and Rear

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: