mk-720_im_A0YA-9560-00E.pdf
(
818 KB
)
Pobierz
MK-720
Mount Kit
INSTALLATION MANUAL
Applied Machines: C360/C280/C220
COLOR MFP: 36 ppm/28 ppm/22 ppm
Product Code: A0ED
I. Accessory parts
[Mount Kit]
No.
Name
Shape
Q’ty
7.
Installation
procedure
No.
Name
Shape
Q’ty
1
1.
PCI expansion
board
1
* Varies depending on the applicable marketing
area
A0YAIXC001DA
2.
Installation
manual
1 set
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
4980IXC019DA
[Fax Kit]
No.
Name
Shape
Q’ty
Note:
• When installing the mount kit (MK-720) on
C220, C220 needs to have the hard disk (HD-
515) installed in advance.
• This manual provides the illustrations of the
accessory parts and machine that may be
slightly different in shape from yours. In that
case, instead of the illustrations, use the
appearance of your machine to follow the
installation procedure. This does not cause any
significant change or problem with the proce-
dure.
3.
FAX kit
1
4037IXC118DA
4.
Modular cable*
1
4442U015AA
5.
Label*
1 set
6.
Installation
precautions
1
A0YA-9560-00
E-1
II. Installation procedures
1. Turn off the machine and unplug the power cord
from the power outlet.
2. Remove the mounting bracket from the PCI
expansion board (four screws).
5. Remove the hard disk and its mounting bracket
together from the machine (two screws).
A0YAIXC011DA
6. Disconnect the two connectors from the hard
disk.
A0YAIXC025DA
3. Remove the cover from the back of the machine
as shown in the illustration (four screws).
A0YAIXC012DA
7. Mount the PCI expansion board on the hard disk
mounting bracket (four screws removed in step
2).
A0YAIXC009DA
4. Remove the plate as shown below (12 screws).
A0YAIXC013DA
A0YAIXC010DA
E-2
8. Connect the two connectors removed in step 6 to
the hard disk.
13. If the machine does not have the paper feed
cabinet installed, remove the indicated knockout
using nippers.
A0YAIXC014DA
A0YAIXC016DA
9. Connect the PCI expansion board connector to
the machine and screw the mounting bracket
(two screws removed in step 5).
14. Remove the left shield cover (six screws).
Note:
When installing the FAX kit to add a line, remove
the right shield cover.
Connector
A0YAIXC015DA
10. Reinstall the plate that has been removed in
step 4 (12 screws).
11. Reinstall the cover that has been removed in
step 3 (four screws).
12. Remove the cover from the right side of the
machine as shown in the illustration (four
screws).
A0YAIXC017DA
15. Check to make sure that SW2 on the FAX con-
trol board is set to “LINE-1.”
Note:
When installing the FAX kit to add a line, set SW2
to LINE-2.
A09NIXC024DA
4037IXC166DC
E-3
16. Insert the FAX kit into the left socket and tighten
the two shoulder screws.
Note:
• When inserting the board, align it with the slits.
• When installing the FAX kit to add a line, insert
the FAX kit into the right socket.
21. Close the door of the cover.
Note:
Pass the modular cable through the hole as shown
in the illustration.
<Paper feed cabinet not installed>
A0YAIXC021DA
<Paper feed cabinet installed>
A0YAIXC018DA
17. Reinstall the cover removed in step 12 (four
screws).
18. Open the door of the cover installed in step 17.
19. Connect the modular cable.
Note:
Plug the modular connector into the modular jack
(LINE) on the right side of the main unit.
A0YAIXC022DA
A0YAIXC019DA
20. Route the modular cable as shown in the illustra-
tion below.
A0YAIXC020DA
E-4
III. Setting the FAX (circuit 1)
1. Plug the power cord into the power outlet and
turn on the machine.
2. Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
3. Touch “System 2.”
4. Touch “Option Board Status.”
5. Touch “Set” of FAX (circuit 1).
6. Touch “END.”
7. Touch “System 1.”
8. Touch “Marketing Area.”
9. Touch “Fax Target.”
10. Use the or key to select the Target Area
(Refer to the list below).
19. Turn OFF and ON the Main Power Switch.
Note:
When displayed the Service Mode screen, be sure
to turn off the main power after exiting the Service
Mode screen and wait for 10 seconds or more
before turning on.
20. Perform the sending and receiving tests
between the Machine and either the store which
offers the service or the local retailer, to check
that it can be operated normally.
Country code setting for FAX
U.S.
US
Portugal
EU* (PT)
Canada
CA
Italy
EU* (IT)
Germany
DE
Poland
EU* (PL)
U.K.
EU* (GB)
Taiwan
TW
France
EU* (FR)
Australia
AU
Switzerland
EU* (CH)
New Zealand
NZ
Netherlands
EU* (NL)
Hong Kong
HK
Belgium
EU* (BE)
Malaysia
MY
Austria
EU* (AT)
Singapore
SG
Norway
EU* (NO)
South Africa
ZA
Sweden
EU* (SE)
China
CN
Finland
EU* (FI)
Korea
KR
Ireland
EU* (IE)
Argentina
AR
Denmark
EU* (DK)
Brazil
BR
Spain
EU* (ES)
Saudi Arabia
SA
Note:
Set OT for countries other than the ones listed
above.
* Select the appropriate country code according to
the dial system used in the installation place. For
DTMF, select “EU,” and for dial pulse, select
“each destination country code.”
11. Touch “END” twice.
12. Touch “FAX.”
13. Touch “Initialization.”
14. Touch “Fax Function Parameter” and “Communi-
cation Journal Data.”
15. Touch “Yes.”
16. Touch “Yes.”
17. Touch “END.”
18. Touch “Exit” on the Service Mode screen.
E-5
Plik z chomika:
ramirez_pl
Inne pliki z tego folderu:
au-101_im_A09M-9557-00E.pdf
(362 KB)
au-102_im_A0X9-9557-00E.pdf
(359 KB)
au-201_im_A09N-9557-00E.pdf
(431 KB)
bizhub_c360_c280_c220_im_A0ED-9602-11E.pdf
(1623 KB)
df-617_im_A0HU-9560-00E.pdf
(581 KB)
Inne foldery tego chomika:
firmware c280
User Guides
Zgłoś jeśli
naruszono regulamin