HMI_TP277_OP277.pdf

Preface

SIMATIC HMI HMI device TP 277, OP 277 (WinCC flexible)

______________

SIMATIC HMI

______________

HMI device

TP 277, OP 277 (WinCC flexible)

______________

Operating Instructions

______________

Order No. 6AV6691-1DH01-0AB0

______________

05/2006

A5E00471222-01

Overview

Safety Instructions and

General Notes

Planning Application

Mounting and Connecting

Operator Controls and

Displays

Configuring the Operating

System

Commissioning a Project

Operating a Project

Operating Alarms

Operating Recipes

Maintenance and Care

Specifications

Appendix

Abbreviations

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

Danger

indicates that death or severe personal injury will result if proper precautions are not taken.

Warning

indicates that death or severe personal injury may result if proper precautions are not taken.

Caution

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

Caution

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

Notice

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and

operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes

in this documentation qualified persons are defined as persons who are authorized to commission, ground and

label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:

Warning

This device may only be used for the applications described in the catalog or the technical description and only in

connection with devices or components from other manufacturers which have been approved or recommended

by Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and

assembly as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Automation and Drives

Postfach 48 48

90437 NÜRNBERG

GERMANY

Order No.: A5E00471222-01

Edition 05/2006

Technical data subject to change

Preface

Purpose of the Operating Instructions

These operating instructions provide information based on the requirements defined by

DIN 8418 for mechanical engineering documentation. This information relates to the the

place of use, transport, storage, mounting, use and maintenance.

These operating instructions are intended for:

• User

• Commissioning engineers

• Service technicians

• Maintenance technicians

Please read the section "Safety Instructions and General Notes" carefully.

The help integrated in WinCC flexible, the WinCC flexible Information System, contains

detailed information. The information system contains instructions, examples and reference

information in electronic form.

Basic Knowledge Required

General knowledge of automation technology and process communication is needed to

understand the operating instructions.

It is also assumed that those using the manual have experience in using personal computers

and knowledge of Microsoft operating systems.

Operating Instructions' Range of Validity

The operating instruction manual applies to the TP 277 and OP 277 HMI devices in

connection with the WinCC flexible software package.

Position in the Information Landscape

These operating instructions form part of the SIMATIC HMI documentation. The following

information provides you with an overview of the SIMATIC HMI information landscape.

User manuals

• WinCC flexible Micro

Describes basic principles of configuration using the WinCC flexible Micro Engineering

System.

TP 277, OP 277 (WinCC flexible)

Operating Instructions, 05/2006, A5E00471222-01

Preface

• WinCC flexible Compact/ Standard/ Advanced

Describes basic principles of configuration using the WinCC flexible Compact

Engineering System/WinCC flexible Standard/WinCC flexible Advanced.

• WinCC flexible Runtime

Describes how to commission and operate your runtime project on a PC.

• WinCC flexible Migration

– Describes how to convert an existing ProTool project to WinCC flexible.

– Describes how to convert an existing WinCC project to WinCC flexible.

– Describes how to convert an existing ProTool project including a change of the HMI

device, for example from OP3 to OP 73 or from OP7 to OP 77B

– Describes how to convert an existing ProTool project including a change from a

graphics device to a Windows CE device.

• Communications

– Communication Part 1 describes the connection of the HMI device to SIMATIC PLCs.

– Communication Part 2 describes the connection of the HMI device to third-party PLCs.

Operating instructions

• Operating instructions for SIMATIC HMI devices.

– OP 73, OP 77A, OP 77B

– TP 170micro, TP 170A, TP 170B, OP 170B

– OP 73micro, TP 177micro

– TP 177A, TP 177B, OP 177B

– TP 270, OP 270

– TP 277, OP 277

– MP 270B

– MP 277

– MP 370

• Operating instructions for mobile SIMATIC HMI devices.

– Mobile Panel 177

– Mobile Panel 277

• Operating instructions (compact) for SIMATIC HMI devices.

– OP 77B

– Mobile Panel 177

– Mobile Panel 277

• Operating instructions for SIMATIC accessories

– Industrial USB Hub 4

TP 277, OP 277 (WinCC flexible)

Operating Instructions, 05/2006, A5E00471222-01

Preface

Getting Started

• WinCC flexible for first time users

Based on an example project, this is a step-by-step introduction to the basics of

configuring screens, alarms, recipes and screen navigation.

• WinCC flexible for power users

Based on an example project, this is a step-by-step introduction to the basics of

configuring logs, project reports, scripts, user management, multilingual projects and

integration in STEP 7.

• WinCC flexible Options

Based on an example project, this is a step-by-step introduction to the basics of

configuring the WinCC flexible Sm@rtServices, Sm@rtAccess and OPC server options.

Online Availability

Technical documentation on SIMATIC products and SIMATIC systems is available in PDF

format in various languages at the following addresses:

• SIMATIC Guide Technical Documentation in German:

" http://www.ad.siemens.de/simatic/portal/html_00/techdoku.htm "

• SIMATIC Guide for Technical Documentation in English:

" http://www.ad.siemens.de/simatic/portal/html_76/techdoku.htm "

Screens

The HMI device is sometimes shown in the form of photographs in these operating

instructions. The photographs of the HMI device may differ slightly from the factory state of

the HMI device.

Conventions

Configuration and runtime software differ with regard to their names as follows:

• "WinCC flexible 2005" for example, refers to the configuration software.

The term "WinCC flexible" is used in a general context. The full name, for example

"WinCC flexible 2005", is always used when it is necessary to differentiate between

different versions of the configuration software.

• "WinCC flexible Runtime" refers to the runtime software that can run on HMI devices.

The following text notation will facilitate reading these operating instructions:

Notation

Scope

"Add screen"

• Terminology that appears in the user interface, for example

dialog names, tabs, buttons, menu entries

• Inputs required, for example limit values, tag values

• Path information

"File > Edit"

Operational sequences, for example, menu commands, context

menu commands

Keyboard operation

TP 277, OP 277 (WinCC flexible)

Operating Instructions, 05/2006, A5E00471222-01

iii

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: