Industrial_Communication_with_PG-PC.pdf

Preface, Contents

SIMATIC NET

General Information

Industrial Communication

Industrial Communication with

PG/PC

Basics of the OPC Interface

OPC Process Variables for

SIMATIC NET

Manual

Properties of the OPC Event

Server for SIMATIC NET

Using the OPC Server

Examples

FAQs

Related Literature

Glossary

This manual is part of the

documentation packages with the order

numbers:

6GK1971 - 1GA00 - 0AA1

6GK1971 - 5DA00 - 0AA1

11/2003

C79000 - G8976 - C172

Release 03

Classification of Safety-Related Notices

This manual contains notices which you should observe to ensure your own perso-

nal safety, as well as to protect the product and connected equipment. These noti-

ces are highlighted in the manual by a warning triangle and are marked as follows

according to the level of danger:

Danger

indicates that death or severe personal injury will result if proper precautions are

not taken.

Warning

indicates that death or severe personal injury can result if proper precautions are

not taken.

Caution

with warning triangle indicates that minor personal injury can result if proper pre-

cautions are not taken.

Caution

without warning triangle indicates that damage to property can result if proper pre-

cautions are not taken.

Notice

indicates that an undesirable result or status can result if the relevant notice is

ignored.

Note

highlights important information on the product, using the product, or part of the

documentation that is of particular importance and that will be of benefit to the

user.

SIMATIC NET Industrial Communication with PG/PC

Release 11/2003

C79000-G8976-C172-03

Trademarks

SIMATIC

, SIMATIC HMI

and SIMATIC NET

are registered trademarks of

SIEMENS AG.

Third parties using for their own purposes any other names in this document which

refer to trademarks might infringe upon the rights of the trademark owners.

Safety Instructions Regarding your Product:

Before you use the product described here, read the safety instructions below tho-

roughly.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment.

Qualified persons are defined as persons who are authorized to commission, to

ground, and to tag circuits, equipment, and systems in accordance with establis-

hed safety practices and standards.

Correct Usage of Hardware Products

Note the following:

Warning

This device and its components may only be used for the applications described in

the catalog or the technical description, and only in connection with devices or

components from other manufacturers which have been approved or recommen-

ded by Siemens.

This product can only function correctly and safely if it is transported, stored, set

up, and installed correctly, and operated and maintained as recommended.

Before you use the supplied sample programs or programs you have written your-

self, make certain that no injury to persons nor damage to equipment can result in

your plant or process.

EU Directive: Do not start up until you have established that the machine on which

you intend to run this component complies with the directive 89/392/EEC.

Correct Usage of Software Products

Note the following:

Warning

This software may only be used for the applications described in the catalog or the

technical description, and only in connection with software products, devices, or

components from other manufacturers which have been approved or recommen-

ded by Siemens.

Before you use the supplied sample programs or programs you have written your-

self, make certain that no injury to persons nor damage to equipment can result in

your plant or process.

SIMATIC NET Industrial Communication with PG/PC

Release 11/2003

C79000-G8976-C172-03

Prior to Startup

Prior to startup, note the following:

Caution

Prior to startup, note the information and follow the instructions in the latest docu-

mentation. You will find the ordering data for this documentation in the relevant

catalogs or contact your local Siemens office.

The reproduction, transmission or use of this document or its contents is not

permitted without express written authority. Offenders will be liable for

damages. All rights, including rights created by patent grant or registration of

a utility model or design, are reserved.

Disclaimer

We have checked the contents of this manual for agreement with the hardwa-

re and software described. Since deviations cannot be precluded entirely, we

cannot guarantee full agreement. However, the data in this manual are revie-

wed regularly and any necessary corrections included in subsequent edi-

tions. Suggestions for improvement are welcomed.

Siemens AG

Automation and Drives

Industrial Communication

Postfach 4848, D-90327 Nuernberg

Technical data subject to change.

Siemens Aktiengesellschaft

C79000- G8976- C172- 03

SIMATIC NET Industrial Communication with PG/PC

Release 11/2003

C79000-G8976-C172-03

Welcome to SIMATIC NET

SIMATIC NET - The Right Decision

You know the advantages of distributed automation systems and want to make

optimum use of industrial communication. You expect a strong partner and

innovative, reliable products. With SIMATIC NET, you’ve made the right choice.

SIMATIC NET - Pioneering successful solutions in black and white

Now that you have made your decision, we’ll be at your side. This documentation

will be your companion on your way to successful application of SIMATIC NET. It

will provide you with a gradual and clear introduction to the topics and will show

you how to install components, how to configure your project and the individual

components, and how to create your own programs based on OPC. You will see

the opportunities that industrial communication with SIMATIC NET can open up for

you, for your automation solutions, and, above all, for the success of your

company.

SIMATIC NET - Professional solutions not only for professionals

To use SIMATIC NET successfully, you don’t need to be an expert. This

documentation will build up your knowledge and let you profit from the know - how

and expertise of the specialists.

Are you a beginner? Then you can familiarize yourself systematically. Start with

the introduction to industrial communication. Here, you will learn everything you

need to know about the principles of communication, the range of functions of

SIMATIC NET, the technical possibilities, and suitable functions for implementing

your automation tasks. When you have digested this information, you should turn

your attention to installation and commissioning. Here, of course, everything

revolves around the OPC interface: Read the basic introduction to the OPC

interface, familiarize yourself with the OPC variables, and learn how to put the

OPC Server from SIMATIC NET to the best possible use.

Are you a professional? Then you can get going straight away. Step - by - step

descriptions, and comprehensive references will guide you over the shortest

possible way to installation, configuration, and operation of SIMATIC NET.

You find examples useful? The supplied sample programs will provide you with a

flexible basis with which you can put your own ideas into practice.

SIMATIC NET Industrial Communication with PG/PC

Release 11/2003

C79000-G8976-C172-03

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: