CIXS202GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

CITROEN

MOD. XSARA 2 YEAR. 02 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the dome of the shock absorber,

passenger’s side.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard, driver’s

side.

POWER SUPPLY

+ 30: connect to the 3 mm 2 RED wire located at the entrance of the fuse box.

- 31: connect with a cable terminal to one of the original ground wire located on

the right of the BSI operating central.

IGNITION WIRE

+ 15/54: connect to the wire, at the position nr. 16, coming out of the 26 way blue

connector of the BSI operating central.

DIRECTION INDICATORS

Connect to the wires at the positions nr.13 and nr.14 coming out of a 16 way black

connector of the BSI operating central.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

refer to the diagram nr. 113.

Front window, passenger’s side:

refer to the diagram nr. 113.

Rear window, driver’s side:

cut the wire located at the position nr. 3, in the 16 way grey connector.

Rear window, passenger’s side:

cut the wire located at the position nr. 4, in the 16 way grey connector.

CENTRAL DOORS LOCKING Original door motor control signal

For antithefts of the Bridge serie, refer to the diagram nr.102 ; for antithefts of the

3100 serie refer to the diagram nr.102A .

IMMOBILISATION POINT 1

Fuel pump

Cut the YELLOW wire located in a wiring harness coming out of the connector of

the inertial switch placed on the shock absorber support, passenger’s side.

IMMOBILISATION POINT 2

General underlock

Cut the wire located at the position nr. 16 coming out of the 26 way blue

connector of the BSI central.

STARTER

+50: Cut the YELLOW wire located in a flying wiring harness placed on the rear

of the cover of the fuse box.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the wire at the position nr. 23 of the 26 way blue connector of the BSI

operating central.

Note: the lamp control is with positive polarity.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cixs202gbb.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N° 102

Diagram to make the lock and unlock of the doors on

Citroen XSARA 2 year 2002

(for Bridge serie antithefts)

VIOLET YELLOW/BLACK ORANGE GREY/BLACK VIOLET/ORANGE

+ 30

Position nr. 4

Position nr. 3

Towards door motors 16 way black connector

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cixs202gbb.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°102A

Diagram to make the lock and unlock of the doors on

Citroen XSARA 2 year 2002

(for 3100 serie antithefts)

VIOLET YELLOW/BLACK ORANGE GREY/BLACK VIOLET/ORANGE

ORANGE/WHITE

+ 30

Position nr. 4

Position nr. 3

Towards door motors 16 way black connector

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cixs202gbb.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N° 113

Diagram for windows connection on

CITROEN XSARA 2 year 2002

Diagram for windows locking using the BROWN/WHITE wire of the autodriven Bridge serie antithefts.

Left Right

push botton push botton

1 2 3 4 5

+30 LIGHT BLUE GREY

Diode 1N4004

BROWN/WHITE Diode 1N4004

Diagram for windows locking using the BROWN wire of the no autodriven Bridge serie, 3100 e 3800 antithefts.

Left Right

push botton push botton

1 2 3 4 5 6 7

LIGHT BLUE GREY

+30

Diode 1N4004

BROWN Diode 1N4004

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cixs202gbb.doc

1052

1055

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: