DANUB98GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

DAEWOO

MOD. NUBIRA

YEAR 98 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment near the

left lateral headlamp. Position the modular systems and the modules under the

dashboard, drivers side.

POWER SUPPLY

+ 30: connect to the 2,5mm 2 RED wire located at the rear of the left lateral frame,

drivers side.

- 31: connect with an eyelet cable terminal to one of the fastening bolt of the

dashboard.

DIRECTION INDICATORS

Connect to the 1 mm 2 BLUE and LIGHT BLUE wires located in the wiring

harness and coming out of the 22 way yellow connector located on the support of

the connector holder, above the fuse box behind the left lateral frame, drivers

side.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the BLUE wire directly outgoing from the switch of the window to the inner

drivers side door.

Front window, passenger’s side:

cut the 1,5 mm 2 LIGHT BLUE wire.

Rear window, driver’s side:

cut the 1,5 mm 2 BROWN wire.

Rear window, passenger’s side:

cut the 1,5 mm 2 GREEN wire located in the wiring harness coming out of the

drivers side door.

CENTRAL DOORS LOCKING

Negative control signal

Connect to the LIGHT BLUE wires with WHITE reference located at the position

nr. 7 (lock) and the YELLOW at the position nr. 1 (unlock), in the 9 way white

connector of the central door locking unit located at the rear of the left lateral

frame, drivers side.

Note: for the vehicles without original key less entry, please refer to

diagram nr. 42 for the serie Bridge antithefts or refer to diagram nr.42A for

serie 3100 antithefts.

IMMOBILISATION POINT

The vehicle has an original equipment immobiliser that may be enabled

immediately when the switchboard is switched off.

BONNET SWITCH

Install an additional switch on the front headlamp support plate.

DOORS SWITCH

Connect to the 0,5 mm 2 WHITE wire located in the wiring harness coming out of

the 16 way white connector, on the support of the connector holder, above the

fuse box behind the left lateral frame, drivers side.

BOOT SWITCH

Connect to the 0,5 mm 2 PINK wire with BLACK reference located in the wiring

harness and coming out of the 16 way white connector located on the support

mentioned above.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

danub98gbb.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°42

Serie BRIDGE antitheft

ORANGE/VIOLET

White connector coming out of the central

doors locking unit.

VIOLET ORANGE

1 2

3 4

6 7 8 9

Negative control signal

For the versions without original radio control the positions Nr. 1 and Nr. 7 of the

white connector of the central doors closing are free, so insert suitable fastons.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

danub98gbb.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°42A

Serie 3100 antitheft

ORANGE/WHITE

VIOLET/WHITE

White connector coming out of the central

doors locking unit.

VIOLET ORANGE

1 2

3 4

6 7 8 9

Negative control signal

For the versions without original radio control the positions Nr. 1 and Nr. 7 of the

white connector of the central doors locking are free, so insert suitable fastons.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

danub98gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: