FISTI02GBBT.PDF

(25 KB) Pobierz
FISTI02GBBT.PDF
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FIAT
MOD. STILO*
YEAR 02 fi
PETROL
DIESEL
X
MAKE
* Models with original equipment keyless entry system.
ALARM/SIREN
POSITION
Position the compact alarms and the sirens on the member behind the passenger’s side
headlamps.
CENTRAL UNIT POSITION
The modular systems and the modules should be positioned under the dashboard, driver’s
side. Pass the cables through the original rubber sleeve located in the bulkhead that divides
the engine compartment and the passenger’s compartment, passenger’s side.
POWER SUPPLY
+30: connect to the 4 mm 2 WHITE/RED wire located in a multiway connector, in the fuse
box.
-31: connect to one of the ground wires behind the left lateral bulkhead, driver’s side.
IGNITION WIRE
+15/54: connect to the BLUE wire, at the position nr. 14, of the 20 way brown connector, in
the former part, on the right, of the fuse box, under the dashboard, driver’s side.
DIRECTION INDICATORS
Connect to the wires making reference to the A section of the diagram nr. 122.
ELECTRIC WINDOWS
Comfort closing
Negative control signal
The window’s locking is obtained timing the same wire that is used for the door’s locking.
ACTIVAT./DEACTIVATION
CONTROLS
Connections antitheft/vehicle
38XX Vehicle Position
GREY/BLACK ground Pos. nr.12, 40 way black connector, fuse box
YELLOW/BLACK ground Car body
VIOLET/WHITE ground Car body
ORANGE ground Car body
VIOLET ground Car body
ORANGE/WHITE ground Car body
For the connection make reference to the diagram nr. 123.
IMMOBILISATION POINT
Fuel pump
Cut the VIOLET/YELLOW wire, at the position nr. 32, located in the wiring harness coming
out of the 32 way black connector, in the front part, on the left, of the fuse box, under the
dashboard, driver’s side
STARTER
+50: Cut the wire at the position marked “+50”, located in the wiring harness coming out of
the connector of the ignition key.
BONNET SWITCH
Install an additional switch on the front headlamp support plate, driver’s side.
DOORS SWITCH
Connect to the WHITE wire, at the position nr. 21, located in the wiring harness coming out
of the 40 way black connector, in the lower part, on the left, in the fuse box, under the
driver’s side dashboard. Connect the wire making reference to the B section of diagram
nr. 122.
BOOT SWITCH
Connect to the WHITE wire located in the wiring harness behind the sill cover, driver’s side.
Connect to the wire making reference to the C section of diagram nr. 122.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fisti02gbbt.doc
108370424.009.png 108370424.010.png
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N° 122
Diagram for direction indicators connection and for doors
and boot perimetrical connection on FIAT STILO year 2002
A section
Direction indicators connection
Diodes 1N4006
YELLOW
YELLOW
40 way black connectror,down,
on the left, in the fuse box
PINK pos. 12
WHITE pos. 3 40 way blue connector, down,
on the left, in the fuse box.
PINK pos. 39
WHITE pos. 2
BROWN pos. 38
WHITE pos. 22
B section
Doors perimetrical connection
40 way black connectror,down,
on the left, in the fuse box BLUE/PINK
WHITE
C section
Boot perimetrical connection
BLUE
Diodes 1N4006
WHITE
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fisti02gbbt.doc
108370424.011.png 108370424.012.png 108370424.001.png 108370424.002.png 108370424.003.png
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N° 123
Diagram for activation/deactivation of 3800 serie antithefts on
FIAT STILO year 2002
GREY/BLACK YELLOW
Diode 1N4006
PINK pos nr. 12
Diode 1N4006
40 way black connector located down, on the left of the fuse box.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fisti02gbbt.doc
108370424.004.png 108370424.005.png 108370424.006.png 108370424.007.png 108370424.008.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin