FIPAN99GBB.PDF

(11 KB) Pobierz
FIPAN99GBB.PDF
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FIAT
MOD. PANDA
YEAR 99
PETROL
DIESEL
X
MAKE
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment near the
support of the battery. Pass the cables through the original rubber sleeve located
in the windshield wiper compartment, behind the black covering, driver’s side.
CENTRAL UNIT POSITION
Position the modular systems and the modules under the dashboard, driver’s
side.
POWER SUPPLY
+ 30: connect to the 6 mm 2 WHITE/RED wire located in the multiway connector in
the fuse box.
- 31: connect with a ring terminal to the car body.
IGNITION WIRE
+ 15/54: connect to the BROWN wire located in the 6 way transparent connector
near the connector of the direction indicators.
DIRECTION INDICATORS
Connect to the 1 mm 2 LIGHT BLUE and LIGHT BLUE/BLACK wires in the 10 way
white connector located under the steering column.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
cut the 2,5 mm 2 WHITE/VIOLET wire coming out of the wiring harness of the
serial push botton.
Front window, passenger’s side:
cut the 2,5 mm 2 WHITE/BLACK wire located in the wiring harness coming out of
the core hitch of the door, driver’s side.
CENTRAL DOORS LOCKING
Negative control signal
Connect to the BLUE wire (lock) and WHITE wire (unlock) in the wiring harness of
the connector coming out of the driver’s side door.
IMMOBILISATION POINT
Fuel pump
Cut the BLACK/VIOLET wire located in the wiring harness coming out of the
connector of the inertial switch.
STARTER
+50: Cut the 2 mm 2 RED wire located in the wiring harness coming out of the
connector of the ignition key.
BONNET SWITCH
Install an additional switch on the headlamp support plate.
DOORS SWITCH
Connect to the BLACK wire coming out of the serial push botton.
BOOT SWITCH
Connect to the wire located in the wiring harness coming out of the connector of
the boot lamp.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fipan99gbb.doc
108370412.001.png 108370412.002.png
Zgłoś jeśli naruszono regulamin