FIIDE04GBBT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FIAT

IDEA*

YEAR 04 ﬁ

PETROL

DIESEL

MAKE

MOD.

* Models with original equipment key less entry system

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment, on the battery

support.

Pass the cables using the original fairlead located behind the ABS group.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under the dashboard, on the left of the steering

wheel.

POWER SUPPLY

+30: connect to the RED wire of the general supply in the fuse box.

-31: connect to the groud terminal located behind the driver’s side bulkhead.

IGNITION WIRE

Connect to the RED/GREEN wire, at the position nr. 19, in the 20 way brown connector

located in the anterior part of the fuse box, under the dashboard driver’s side.

DIRECTION INDICATORS

Connect to the wires: WHITE at the position nr. 3, BLUE/RED at the position nr. 13,

WHITE/GREEN at the position nr.2 and GREY at the position nr. 12, in the 40 way black

connector and to the wires: BLUE at the position nr.39, ORANGE at the position nr.38 in the

40 way light blue connector. The black and light blue connectors are located in the anterior

part of the fuse box, under the dashboard driver’s side.

Note: Separate the lines by means of diodes.

ELECTRIC WINDOWS

Positive control signal

The locking of the electric windows is obtained timing to 24s the WHITE/GREY wire, the same

used for the door’s locking at 24s.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

Refer to the fitting diagram nr. 210

IMMOBILISATION POINT

Fuel pump

Cut the VIOLET/YELLOW wire, at the position nr.32, in the 32 way black connector in the

anterior part of the fuse box located on the left of the steering wheel, under the driver’s side

dashboard.

STARTER

+50: Cut the BROWN wire located in the wiring harness coming out of the connector of the

ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate.

DOORS SWITCH

Note: the signal is timed.

Connect to the WHITE wire at the position nr.21, in the 40 way black connector, located in the

anterior part of the fuse box, under the driver’s side dashboard.

BOOT SWITCH

Connect to the BLACK/LIGHT BLUE wire at the position nr. 36, in the 40 way black connector,

located in the anterior part of the fuse box, under the driver’s side dashboard.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fiide04gbbt.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM NR. 210

Diagram to connect 3800 on

FIAT IDEA year 2004

VIOLET GREY/BLACK VIOLET/WHITE

ORANGE/WHITE YELLOW/BLACK ORANGE

ground

36 way BLUE connector

inside driver’s side door

+30

1N4004 diodes

WHITE/GREY pin nr.24

WHITE/BROWN pin nr.25

BROWN/GREEN pin nr.2

WHITE/BLACK pin nr.1

Driver’s side

door motor

ORANGE/BLACK

open/close original

push-button

YELLOW/LIGHT BLUE

Wiring harness coming

out the driver’s side door

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fiide04gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: