Torebeczka.pdf

burda Download

Instructions – Handbag 152

Approx. 30 x 40 cm (12" x 16")

and edgestitch in place. From bias

tape, cut 2 pieces, each 46 cm (18")

long. Pin pieces to inside of bag to

meet marked casing lines, turning

ends under at seam openings.

Edgestitch edges of bias tape in

place. Cut remaining bias tape in-

to 2 equal pieces. Fold pieces in

half lengthwise, wrong side fac-

ing in, and edgestitch long edges

closed. Pull one piece around bag,

through casing, from one side,

and pull second piece around

bag, through casing, from the

opposite side. Knot ends of each

piece together.

Press allowances on all edges of

each handle piece to wrong side.

Fold handles to 2 cm ( 3 ⁄ 4 ") wide and

edgestitch long edges closed. Pin

ends of each handle to inside upper

edge of bag, 6 cm (2 1 ⁄ 2 ") from side

seams. Stitch across handles along

upper stitching lines and 1 cm

( 3 ⁄ 8 ") below upper stitching lines.

Cut spiral (approx. 5 cm / 2" wide)

to center of flower circle. Hand-

stitch running stitches along in-

ner edge, pull thread to gather,

and sew edges together at center

of flower. Sew center of sequin

tape under center of flower. Sew

flower to bag front as illustrated.

Materials:

Brocade fabric, 140 cm (55") wide:

0.45 m ( 1 ⁄ 2 yd). Vilene/Pellon fusible

interfacing H 200. Pre-folded satin

bias tape, 2 cm ( 3 ⁄ 4 ") wide: 3.30 m

(3 5 ⁄ 8 yds). Sequin tape, 5 mm ( 3 ⁄ 16 ")

wide: 0.60 m (24").

Seam allowances:

1 cm ( 3 ⁄ 8 ") for seams and 2 cm ( 3 ⁄ 4 ")

on upper edge of bag.

Cutting:

Bag piece: 60 cm (24") long (fin-

ished height = 30 cm / 12") and

40 cm (16") wide.

2 handle pieces, each 58 cm (23")

long and 4 cm (1 1 ⁄ 2 ") wide (finished

width = 2 cm / 3 ⁄ 4 ").

Flower: cut circle with 20 cm (8") Ø.

Interfacing: Iron to wrong side of

handle pieces.

line, right side facing in (match-

ing narrow edges). Stitch side edges

closed, interrupting stitching on

each side between lines for casing.

Finish edges of seam allowances.

Press seams open. Fold bag so

that each side seam lies on center

bottom line, right side facing in.

Stitch at right angle to seam, 5 cm

(2") from the point that is formed.

Trim away point 1 cm ( 3 ⁄ 8 ") from

this stitching and finish resulting

edges together.

Press allowance on upper edge of

bag to inside, turn raw edge under,

Sewing:

On wrong side of bag piece, mark

lines for tie band casings, 6 cm

(2 1 ⁄ 2 ") and 8 cm (3 1 ⁄ 4 ") from each

narrow edge. Also mark center

bottom line across bag piece, half-

way between narrow edges. Fold

bag piece on this center bottom

All models, pattern pieces, and illustrations are copyrighted. Commercial use is prohibited.

The publishers cannot be held responsible for damages due to improper use of the pattern or materials,

improper carrying-out of instructions or tips, or improper use of finished models.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: