Service Mode Philips Chassis L01.1E AB byte.pdf
(
157 KB
)
Pobierz
L01.1EabSMgb.book
EN 58
8.
L01.1E AB
Alignments
8.3.1 Options
S A M
CL 16532008_064.pdf
230501
OP1
XXX
OP 2
XXX
OP 3
XXX
OP4
XXX
OP5
XXX
OP6
XXX
OP7
XXX
CL 16532008_048.pdf
220501
Figure 8-4
Options are used to control the presence/absence of certain
features and hardware.
How to change an Option Byte
An Option Byte represents a number of different options.
Changing these bytes directly makes it possible to set all
options very fast. All options are controlled via seven option
bytes. Select the option byte (OB1.. OB7) with the MENU UP/
DOWN keys, and enter the new value.
Leaving the OPTION submenu saves changes in the Option
Byte settings. Some changes will only take effect after the set
has been switched OFF and ON with the Mains switch (cold
start).
How to calculate the value of an Option Byte
Calculate an Option Byte value (OB1 .. OB7) in the following
way:
1. Check the status of the single option bits (OP): are they
enabled (1) or disabled (0).
2. When an option bit is enabled (1) it represents a certain
value (see first column ‘value between brackets’ in first
table below). When an option bit is disabled, its value is 0.
3. The total value of an Option Byte is formed by the sum of
its eight option bits. See second table below for the correct
option numbers per typenumber.
CL 16532008_049.pdf
210501
Figure 8-6
Option Bit Assignment
Following are the option bit assignments for all L01 software
clusters.
•
Option Byte 1 (OB1)
– OP10: CHINA
– OP11: VIRGIN_MODE
– OP12: UK_PNP
– OP13: ACI
– OP14: ATS
– OP15: LNA
– OP16: FM_RADIO
– OP17: PHILIPS_TUNER
•
Option Byte 2 (OB2)
– OP20: HUE
– OP21: COLOR_TEMP
– OP22: CONTRAST_PLUS
– OP23: TILT
Figure 8-5
Alignments
L01.1E AB
8.
EN 59
– OP24: NOISE_REDUCTION
– OP25: CHANNEL_NAMING
– OP26: SMART_PICTURE
– OP27: SMART_SOUND
•
Option Byte 3 (OB3)
– OP30: AVL
– OP31: WSSB
– OP32: WIDE_SCREEN
– OP33: SHIFT_HEADER_SUBTITLE
– OP34: CONTINUOUS_ZOOM
– OP35: COMPRESS_16_9
– OP36: EXPAND_4_3
– OP37: EW_FUNCTION
•
Option Byte 4 (OB4)
– OP40: STEREO_NON_DBX
– OP41: STEREO_DBX
– OP42: STEREO_PB
– OP43: STEREO_NICAM_2CS
– OP44: DELTA_VOLUME
– OP45: ULTRA_BASS
– OP46: VOLUME_LIMITER
– OP47: INCR_SUR
•
Option Byte 5 (OB5)
– OP50: PIP
– OP51: HOTEL_MODE
– OP52: SVHS
– OP53: CVI
– OP54: AV3
– OP55: AV2
– OP56: AV1
– OP57: NTSC_PLAYBACK
•
Option Byte 6 (OB6)
– OP60: Reserved (value = 0)
– OP61: SMART_TEXT
– OP62: SMART_LOCK
– OP63: VCHIP
– OP64: WAKEUP_CLOCK
– OP65: SMART_CLOCK
– OP66: SMART_SURF
– OP67: PERSONAL_ZAPPING
•
Option Byte 7 (OB7)
– OP70: SOUND_SYSTEM_AP_3/
MULTI_STANDARD_EUR/SYSTEM_LT_2
– OP71: SOUND_SYSTEM_AP_2/WEST_EU/
SYSTEM_LT_1
– OP72: SOUND_SYSTEM_AP_1
– OP73: COLOR_SYSTEM_AP
– OP74: Reserved (value = 0)
– OP75: Reserved (value = 0)
– OP76: TIME_WIN2
– OP77: TIME_WIN1
Default setting : 0.
OP13: ACI
0 : ACI feature is disabled or not applicable,
1 : ACI feature is enabled,
Default setting : 0.
OP14: ATS
0 : ATS feature is disabled or not applicable,
1 : ATS feature is enabled. When ATS is enabled, it sorts the
program in an ascending order starting from program 1,
Default setting : 0.
OP15: LNA
0 : Auto Picture Booster is not available or not applicable,
1 : Auto Picture Booster is available,
Default setting : 0.
OP16: FM_RADIO
0 : FM radio feature is disabled or not applicable,
1 : FM radio feature is enabled,
Default setting : 0.
OP17: PHILIPS_TUNER
0 : ALPS/MASCO compatible tuner is in use,
1 : Philips compatible tuner is in use,
Default setting : 0.
OP20: HUE
0 : Hue/Tint Level is disabled or not applicable,
1 : Hue/Tint Level is enabled,
Default setting : 0.
OP21: COLOR_TEMP
0 : Colour Temperature is disabled or not applicable,
1 : Colour Temperature is enabled,
Default setting : 0.
OP22: CONTRAST_PLUS
0 : Contrast+ is disabled or not applicable,
1 : Contrast+ is enabled,
Default setting : 0.
OP23: TILT
0 : Rotate Picture is disabled or not applicable,
1 : Rotate Picture is enabled,
Default setting : 0.
OP24: NOISE_REDUCTION
0 : Noise Reduction (NR) is disabled or not applicable,
1 : Noise Reduction (NR) is enabled,
Default setting : 0.
Option bit definition
OP25: CHANNEL_NAMING
0 : Name FM Channel is disabled or not applicable,
1 : Name FM Channel is enabled,
Default setting : 0.
Note:
Name FM channel can be enabled only when
FM_RADIO = 1.
OP10: CHINA
0 : Tuning is not for China set, or this option bit is not applicable,
1 : Tuning is for China set,
Default setting : 0.
OP11: VIRGIN_MODE
0 : Virgin mode is disabled or not applicable,
1 : Virgin mode is enabled. Plug and Play menu item will be
displayed to perform installation at the initial start-up of the TV
when VIRGIN_MODE is set to 1. After installation is finished,
this option bit will be automatically set to 0,
Default setting : 0.
OP26: SMART_PICTURE
0 : Smart Picture is disabled or not applicable,
1 : Smart Picture is enabled,
Default setting : 1
OP27: SMART_SOUND
0 : Smart Sound is disabled or not applicable,
1 : Smart Sound is enabled,
Default setting : 1
OP12: UK_PNP
0 : UK's default Plug and Play setting is not available or not
applicable,
1 : UK's default Plug and Play setting is available. When
UK_PNP and VIRGIN_MODE are set to 1 at the initial set-up,
LANGUAGE = ENGLISH, COUNTRY = GREAT BRITAIN and
after exiting from menu, VIRGIN_MODE will be set
automatically to 0 while UK_PNP remains 1,
AP30: AVL
0 : AVL is disabled or not applicable,
EN 60
8.
L01.1E AB
Alignments
1 : AVL is enabled,
Default setting : 0.
Default setting : 0.
OP31: WSSB
0 : WSSB is disabled or not applicable,
1 : WSSB is enabled,
Default setting : 0.
Note:
This option bit can be set to 1 only
when WIDE_SCREEN = 1.
OP46: VOLUME_LIMITER
0 : Volume Limiter Level is disabled or not applicable,
1 : Volume Limiter Level is enabled,
Default setting : 0.
OP47: INCR_SUR
0 : Incredible Surround feature is disabled,
1 : Incredible Surround feature is enabled,
Default setting : 1
OP32: WIDE_SCREEN
0 : Software is used for 4:3 set or not applicable,
1 : Software is used for 16:9 set,
Default setting : 0.
OP50: PIP
0 : PIP is disabled or not applicable,
1 : PIP is enabled,
Default setting : 0.
OP33: SHIFT_HEADER_SUBTITLE
0 : Shift Header/Subtitle is disabled or not applicable,
1 : Shift Header/Subtitle is enabled,
Default setting : 0.
Note:
This option bit can be set to 1 only
when WIDE_SCREEN = 1.
OP51: HOTEL_MODE
0 : Hotel mode is disabled or not applicable,
1 : Hotel mode is enabled,
Default setting : 0.
OP34: CONTINUOUS_ZOOM
0 : Continuous Zoom is disabled or not applicable,
1 : Continuous Zoom is enabled,
Default setting : 0.
Note:
This option bit can be set to 1 only
when WIDE_SCREEN = 1.
OP52: SVHS
0 : SVHS source is not available,
1 : SVHS source is available,
Default setting : 0.
Note:
This option bit is not applicable for EU.
OP35: COMPRESS_16_9
0 : COMPRESS 16:9 selection is not applicable. Item should
not be in the FORMAT menu list,
1 : COMPRESS 16:9 selection is applicable. Item should not be
in the FORMAT menu list,
Default setting : 0.
OP53: CVI
0 : CVI source is not available,
1 : CVI source is available,
Default setting : 0.
OP36: EXPAND_4_3
0 : Expand 4:3 selection is not applicable. Item should not be in
the FORMAT menu list,
1 : Expand 4:3 selection is applicable. Item should be in the
FORMAT menu list,
Default setting : 0.
OP54: AV3
0 : Side/Front AV3 source is not present,
1 : Side/Front AV3 source is present,
Default setting : 0.
OP55: AV2
0 : AV2 source is not present,
1 : AV2 source is present,
Default setting : 0.
Note:
For EU, when AV2=1, both EXT2 and SVHS2 should be
included in the OSD loop.
OP37: EW_FUNCTION
0 : EW function is disabled. In this case, only Expand 4:3 is
allowed, Compress 16:9 is not applicable.
1 : EW function is enabled. In this case, both Expand 4:3 and
Compress 16:9 are applicable.
Default setting : 0.
OP56: AV1
0 : AV1 source is not present,
1 : AV1 source is present,
Default setting : 0.
OP40: STEREO_NON_DBX
0 : For AP_NTSC, chip TDA 9853 is not present,
1 : For AP_NTSC, chip TDA 9853 is present,
Default setting : 0.
OP57: NTSC_PLAYBACK
0 : NTSC playback feature is not available,
1 : NTSC playback feature is available,
Default setting : 0.
OP41: STEREO_DBX
0 : For AP_NTSC, chip MSP 3445 is not present,
1 : For AP_NTSC, chip MSP 3445 is present,
Default setting : 0.
OP60: Reserved
Default setting : 0.
OP42: STEREO_PB
0 : For AP_PAL, chip MSP3465 is not present,
1 : For AP_PAL, chip MSP3465 is present,
Default setting : 0.
OP61: SMART_TEXT
0 : Smart Text Mode and Favourite Page are disabled or not
applicable,
1 : Smart Text Mode and Favourite Page are enabled,
Default setting : 1.
OP43: STEREO_NICAM_2CS
0 : For EU and AP_PAL, chip MSP 3415 is not present,
1 : For EU and AP_PAL, chip MSP 3415 is present,
Default setting : 0.
OP62: SMART_LOCK
0 : Child Lock and Lock Channel are disabled or not applicable
for EU,
1 : Child Lock and Lock Channel are enabled for EU,
Default setting : 1.
OP44: DELTA_VOLUME
0 : Delta Volume Level is disabled or not applicable,
1 : Delta Volume Level is enabled,
Default setting : 0.
OP45: ULTRA_BASS
0 : Ultra Bass is disabled or not applicable,
1 : Ultra Bass is enabled,
OP63: VCHIP
0 : VCHIP feature is disabled,
Alignments
L01.1E AB
8.
EN 61
1 : VCHIP feature is enabled,
Default setting : 1.
OP77 and 76: TIME_WIN1, TIME_WIN2
00 : The time window is set to 1.2s
01 : The time window is set to 2s
10 : The time window is set to 5s
11 : not in use
Default setting : 01
Note:
The time-out for all digit entries depend on this setting.
OP64: WAKEUP_CLOCK
0 : Wake up clock feature is disabled or not applicable,
1 : Wake up clock feature is enabled,
Default setting : 1.
OP65: SMART_CLOCK
0 : Smart Clock Using Teletext and Smart Clock Using PBS is
disabled or not applicable,
1 : Smart Clock Using Teletext and Smart Clock Using PBS is
enabled. For NAFTA, menu item AUTOCHRON is present in
the INSTALL submenu,
Default setting : 0.
8.3.2 Tuner
Note:
Described alignments are only necessary when the NVM
(item 7602) is replaced.
OP66: SMART_SURF
0 : Smart Surf feature is disabled or not applicable,
1 : Smart Surf feature is enabled,
Default setting : 0.
S A M
I F PLL
XXX
OP67: PERSONAL_ZAPPING
0 : Personal Zapping feature is disabled or not applicable,
1 : Personal Zapping feature is enabled,
Default setting : 0.
A F W
XXX
AGC
XXX
YD
XXX
CL
XXX
OP70: MULTI_STANDARD_EUR
0 : Not for Europe multi standard set, or this option bit is not
applicable,
1 : For Europe multi standard set.
Default setting : 0.
Note:
This option bit is used to control the SYSTEM selection
in Manual Store : If MULTI_STANDARD_EUR = 1 then
SYSTEM = Europe, West Europe, East Europe, UK, France
otherwise SYSTEM = ‘Europe, West Europe, UK for West
Europe’ (WEST_EU=1) or SYSTEM = ‘Europe, West Europe,
East Europe for East Europe’ (WEST_EU=0)
AFA
ON / OFF
AFB
ON / OFF
CL 16532008_050.pdf
220501
Figure 8-7
IFPLL
This adjustment is auto-aligned. Therefore, no action is
required.
Default value is 30.
OP71: WEST_EU
0 : For East Europe set, or this option bit is not applicable,
1 : For West Europe set,
Default setting : 0.
AFW (AFC window)
Select the lowest value.
OP71 and 70: SYSTEM_LT_1, SYSTEM_LT_2
These two option bits are allocated for LATAM system
selection.
00 : NTSC-M
01 : NTSC-M, PAL-M
10 : NTSC-M, PAL-M, PAL-N
11 : NTSC-M, PAL-M, PAL-N, PAL-BG
Default setting : 00
AGC (AGC take over point)
Set the external pattern generator to a colour bar video signal
and connect the RF output to aerial input.
Set amplitude to 10 mV and set frequency to 475.25 MHz (PAL/
SECAM) or 61.25 MHz (NTSC).
Connect a DC multi-meter to pin 1 of the tuner (item 1000 on
the main panel).
1. Activate the SAM.
2. Go to the TUNER sub menu.
3. Select AFW with the UP/DOWN cursor keys and set to ON.
4. Select AGC with the UP/DOWN cursor keys.
5. Adjust the AGC-value with the LEFT/RIGHT cursor keys
until the voltage at pin 1 of the tuner lies between 3.8 and
2.3 V. Default value is 28.
6. Select AFW with the UP/DOWN cursor keys and set to
OFF.
7. Switch the set to STANDBY.
OP70, 71 and 72: SOUND_SYSTEM_AP_1,
SOUND_SYSTEM_AP_2, SOUND_SYSTEM_AP_3
These three option bits are allocated for AP_PAL sound
system selection.
000 : BG
001 : BG/DK
010 : I/DK
011 : BG/I/DK
100 : BG/I/DK/M
Default setting : 00
YD (Y-delay adjustment)
Fixed value is 7.
OP73: COLOR_SYSTEM_AP
This option bit is allocated for AP-PAL colour system selection.
0 : Auto, PAL 4.43, NTSC 4.43, NTSC 3.58
1 : Auto, PAL 4.43, NTSC 4.43, NTSC 3.58, SECAM
Default setting : 0
CL (Cathode drive level)
Fixed value is 8.
AFA/AFB
Read only bit, for monitoring purpose only.
OP74: Reserved
Default setting : 0.
OP75: Reserved
Default setting : 0.
EN 62
8.
L01.1E AB
Alignments
8.3.3 White Tone
1
VERT. SLOPE
2
VERT. SHIFT
S A M
NORMA L
> (1)
3
VERT. AMPLITUDE
COOL
> (2)
W A R M
> (3)
(1) N O R M A L R E D
X X
NORMAL GREEN
XX
4
V.S-CORRECTION
NORMAL BLUE
XX
(2) D
C O O L R E D
X X
DCOOLGREEN
XX
DCOOLBLUE
XX
5
HOR. SHIFT
(3) D W A R M
R E D
X X
DWARMGREEN
XX
DWARMBLUE
XX
6
HOR. AMPLITUDE
CL 16532008_051.pdf
220501
Figure 8-8
7
E/W PARABOLE
In the WHITE TONE sub menu, the values of the black cut off
level can be adjusted. Normally, no alignment is needed for the
WHITE TONE. You can use the given default values.
The colour temperature mode (NORMAL, COOL and WARM)
and the colour (R, G, and B) can be selected with the UP/
DOWN RIGHT/LEFT cursor keys. The value can be changed
with the LEFT/RIGHT cursor keys. First, select the values for
the NORMAL colour temperature. Then select the values for
the COOL and WARM mode. After alignment, switch the set to
standby, in order to store the alignments.
8
UPPER E/W CORNER
9
LOWER E/W CORNER
10
E/W TRAPEZIUM
11
HOR. PARALLELOGRAM
Default settings:
1.
NORMAL
(colour temperature = 10500 K):
– NORMAL R = 26
– NORMAL G = 32
– NORMAL B = 27
2.
COOL
(colour temperature = 14000 K):
– DELTA COOL R = -3
– DELTA COOL G = 0
– DELTA COOL B = 5
3.
WARM
(colour temperature = 8200 K):
– DELTA WARM R = 2
– DELTA WARM G = 0
– DELTA WARM B = -6
12
HOR. BOW
CL 16532044_022.eps
140501
Figure 8-9
How to align
Connect an external video pattern generator to the aerial input
of the TV-set and input a crosshatch test pattern.
Set amplitude to at least 1 mV and set frequency to 475.25
MHz (PAL/SECAM) or 61.25 MHz (NTSC).
1. Set 'Smart Picture' to NATURAL (or MOVIES).
2. Activate the SAM menu (see chapter 5).
3. Go to the GEOMETRY sub menu.
4. Choose HORIZONTAL or VERTICAL alignment
Now you can perform the following alignments:
8.3.4 Geometry
The geometry alignments menu contains several items to align
the set, in order to obtain a correct picture geometry.
Horizontal alignment
•
Horizontal Parallelogram (HP).
Align straight vertical
lines in the top and the bottom; vertical rotation around the
centre.
•
Horizontal Bow (HB).
Align straight horizontal lines in the
top and the bottom; horizontal rotation around the centre.
•
Horizontal Shift (HSH).
Align the horizontal centre of the
picture to the horizontal centre of the CRT.
•
East West Width (EWW).
Align the picture width until the
complete test pattern is visible.
•
East West Parabola (EWP).
Align straight vertical lines at
the sides of the screen.
•
Upper Corner Parabola (UCP).
Align straight vertical lines
in the upper corners of the screen.
Plik z chomika:
wielki1980
Inne pliki z tego folderu:
Philips L01.2E(1).pdf
(870 KB)
philips_chassis-l01.2e-aa.pdf
(7138 KB)
Service Mode Philips Chassis L01.1E AB byte(1).pdf
(157 KB)
Service Mode Philips Chassis L01.1E AB byte.pdf
(157 KB)
Philips L01.2E.pdf
(870 KB)
Inne foldery tego chomika:
! AutoCAD 2011 PL x64
Bajki
Dokumenty
FILMY
GRY
Zgłoś jeśli
naruszono regulamin