_mech_INSTALLATION INSTRUCTION.pdf

(205 KB) Pobierz
Title
Installation Instruction, Mechanical
Installation Instruction, Mechanical
Applicable for V800/ 802se
Contents
1
2
Test Setup .......................................................................................................... 2
2.2
Computer ........................................................................................................... 3
2.3
Hardlock ............................................................................................................ 3
2.4
Service Card Reader/Service Card .................................................................... 3
2.5
Sony Ericsson programming interface Î SEPI .................................................. 3
2.6
Sony Ericsson programming interface Î Cable ................................................. 3
2.7
USB PC cable .................................................................................................... 3
2.8
Infrared Device .................................................................................................. 3
2.9
Bluetooth Device ............................................................................................... 3
2.10
Label Printer (optional) ..................................................................................... 4
2.11
Micro USB cable ............................................................................................... 4
3
3.2
EMMA II ........................................................................................................... 4
4
1/00021-1/FEA 209 544/88 C
Company Internal Sony Ericsson Mobile Communications AB
Approved according to 000 21-LXE 107 42/1
Labelmake software (optional) .......................................................................... 4
349144734.002.png
Installation Instruction , Mechanical
1 General
This document describes the installation procedure for the Mechanical repair package.
The Mechanical repair package consists of a Computer and Interface Cables. A Hardlock and
a Service Card are required for security reasons. A label printer can be installed to be able to
print new labels (optional).
2 Hardware
All hardware must be approved by Sony Ericsson and is documented in the Equipment List.
2.1 Test Setup
1/00021-1/FEA 209 544/88 C
Company Internal Sony Ericsson Mobile Communications AB
2(5)
349144734.003.png
Installation Instruction , Mechanical
2.2
Computer
IBM compatible computer is required. The computer should include at least two USB-ports.
Refer to Equipment List for minimum requirements.
2.3
Hardlock
Hardlock with article number KRY 105 165 is required. The Hardlock should be connected to
the parallel port on the computer.
2.4
Service Card Reader/Service Card
The Service Card Reader is delivered with the necessary software and instructions for
installation. The Service Card Reader should be connected to an USB-port on the computer.
2.5
Sony Ericsson programming interface Î SEPI
The USB programming interface is delivered with the necessary software and instruction for
installation.
2.6
Sony Ericsson programming interface Î Cable
The cable is the interface between the USB programming interface and the phone. Connect
the cable between the programming interface and the phone.
2.7
USB PC cable
The A-B Plug-Plug cable is the interface between the computer and the programming
interface. Connect the cable between the programming interface and the computer.
2.8
Infrared Device
An RS 232 or USB type infrared adapter may be used. Install according to the manufactorªs
instructions.
2.9
Bluetooth Device
Any Bluetooth device as headset, other Bluetooth phone or other Bluetooth device can be
used to verify the Bluetooth function in the phone. Set up the connection according to the
chosen equipments manufacture.
1/00021-1/FEA 209 544/88 C
Company Internal Sony Ericsson Mobile Communications AB
3(5)
349144734.004.png
Installation Instruction , Mechanical
2.10 Label Printer (optional)
A Zebra printer model 90xi, 90xiII or 4000 deluxe shall be used. Connect the printer with a
standard RS 232 serial printer cable [refer to the Zebra printer manual] to the serial port on
the computer. Read the Zebra installation manual for more information about the installation.
2.11 Micro USB cable
A micro USB cable (RPM 131 102) is used to verify the USB connector in the phone.
Connect the USB cable in one of the USB connectors on the PC and the other end of the cable
in to the phone.
3 Software
3.1
EMMA II
EMMA II contains software upgrades and tools requiring for servicing this phone. Emma II is
accessible through the CSPN. Installation and user manuals are available in the EMMA II
start page.
3.2
Labelmake software (optional)
LabelMake II is an application installed through Java Web Start.
Access the Labelmake software from the CSPN Web page.
You will find LabelMake II in the dropdown menu on the CSPN web page.
Press ÐSTART LabelMake II Ðbutton and you will be directed to the LABELMAKE II client
page.
Product labels are downloaded on-line from a remote server database.
1/00021-1/FEA 209 544/88 C
Company Internal Sony Ericsson Mobile Communications AB
4(5)
349144734.005.png
Installation Instruction , Mechanical
4 RevisionHistory
Rev.
Date
Changes / Comments
A
2004-11-30
First release
B
2004-12-03
Due to system problem
C
2004-12-30
Updated chapter 3.2 Labelmake software
1/00021-1/FEA 209 544/88 C
Company Internal Sony Ericsson Mobile Communications AB
5(5)
349144734.001.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin