INSTALLATION INSTRUCTION.pdf

(339 KB) Pobierz
Title
Installation Instruction, Electrical
Installation Instruction, Electrical
Applicable for V800/ 802se
Contents
1
2
3
4
5
EMMA II ........................................................................................................... 8
5.2
Labelmake software (optional) .......................................................................... 8
5.3
Go/No Go Test Script ........................................................................................ 8
5.4
SERP (only authorized centres)......................................................................... 8
6
1/00021-2/FEA 204 544/88 C
Company Internal Sony Ericsson Mobile Communications AB
Approved according to 000 21-LXE 107 42/1
349144874.003.png
Installation Instruction , Electrical
1 General
The Electrical Installation Instructions describes the procedures for installing all of the
hardware and software needed to perform testing, calibration, software loading and repair
activities at an Electrical level for the Sony Ericsson products specified.
NOTE!
This product is manufactured with lead-free solder. During electrical repair, it is critical to
make sure that no lead is introduced into the product. For this reason, certain repair materials
and equipment must be designated as lead-free and labelled accordingly. A lead-free work
area must be setup that is completely separated from work areas that are used to make leaded
repairs. Certain items must be designated for lead-free work only. Some of the items that
need to be clearly labelled in this way are listed in the Equipment List Electrical and Working
Instruction Electrical. Note that any item that contacts the solder must be labelled and used for
lead-free work only.
2 Go/No Go Testing
There are two options for performing a Go No/Go test. One option is to use an RF Fixture and
the other is to use an antenna coupler together with a shielding box.
2.1
Test Set-up Go/No Go test
All test hardware necessary for this test set up is documented in the Electrical Equipment List.
1/00021-2/FEA 204 544/88 C
Company Internal Sony Ericsson Mobile Communications AB
2(9)
349144874.004.png
Installation Instruction , Electrical
2.1.1 Test Set
An E-GSM 900/1800/1900/WCDMA Test Set approved according to the Instrument List
must be used.
It should be installed according to the Instrument Manufacturer Instructions.
2.1.2 RF Connections Antenna Coupler
Connect the RF Cable between the RF-port of the Test set and the RF Antenna Coupler. The
Antenna Coupler should be installed into the RF Shield Box according to the supplied
instructions.
2.1.3 RF Connections Antenna adapter
Connect the RF-cable between the RF-port of the Test set and the RF Antenna adapter.
Assemble the RF Antenna adapter to the RF Fixture according to the information in the Test
Instruction Electrical.
2.1.4 RF Shield box
The specified RF Shield box according to the Electrical Equipment list shall be used.
2.1.5 Dummy Battery (Optional)
Dummy battery to be used together with a power supply to power the phone during the
Go/No Go testing. Connect the cables from the dummy battery to the power supply, red cable
to positive output terminal and black cable to negative output terminal.
1/00021-2/FEA 204 544/88 C
Company Internal Sony Ericsson Mobile Communications AB
3(9)
349144874.005.png
Installation Instruction , Electrical
3 Calibration
3.1
Test Set-up Î SERP (only authorized centres)
All test hardware necessary for this test set up is documented in the Electrical Equipment and
Instrument List.
3.1.1 Test Set
A Test Set approved according to the Instrument List must be used.
It should be installed according to the Instrument Manufacturer Instructions.
3.1.2 Power Supply
Power Supply according to Instrument List must be used.
3.1.3 GPIB card and cable
Use the GPIB card and cable according to the Equipment List. Use the GPIB cable to connect
the GPIB card to the test instrument.
1/00021-2/FEA 204 544/88 C
Company Internal Sony Ericsson Mobile Communications AB
4(9)
349144874.006.png 349144874.001.png
Installation Instruction , Electrical
3.1.4 RF Connection
The RF Fixture holder and RF Antenna Adapter according to the Electrical Equipment List
shall be used. Connect the RF Antenna Adapter to the RF cable. The RF probe is held on the
phone with the RF fixture.
3.1.5 Dummy Battery
Battery Eliminator to be used together with a power supply to power the phone during
calibration. Connect the cables from the dummy battery to the power supply, red cable to
positive output terminal and black cable to negative output terminal.
1/00021-2/FEA 204 544/88 C
Company Internal Sony Ericsson Mobile Communications AB
5(9)
349144874.002.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin