SGH-G800_Disassembly & Reassembly.pdf

(2950 KB) Pobierz
C:\Documents and Settings\최윤선\...
7. Disassembly and Assembly Instructions
7-1. Disassembly
1
2
1) Unscrew 4 points from the rear case.
※ caution
1) Be careful not to make scratch and molding
dama ge!
1)Lift up sides of Rear using Assembly stick and
disjoint it.
※ caution
1) Be careful not to make scratch and molding
damage!
3
4
1)Unscrew 1 point from the camera module.
※ caution
1) Be careful not to make scratch and molding
damage!
1)Disconnect Camera module FPCB connector.
2)Disjoint Camera module from the front case.
※ caution
1) Be careful not to make scratch and molding
damage!
7-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
349159386.025.png 349159386.026.png 349159386.027.png 349159386.028.png 349159386.001.png 349159386.002.png 349159386.003.png 349159386.004.png
Exploded View and Parts List
5
6
1)Remove the anelectric tape at the speaker
module connector.
2)Disconnect speaker module FPCB connector.
※ caution
1)Be careful not to make scratch and molding
damage!
2) Be careful of damage to the FPCB.
1)Unhook speaker module from the fFront case.
※ caution
1) Be careful not to make scratch and molding
damage!
7
8
1)Remove volume key FPCB from Front Rib.
2)Remove camera key FPCB from Front Rib.
※ caution
1) Be careful not to make scratch and molding
damage!
1)Disjoint MICRO SD cover.
2) Disjoint I/F cover.
※ caution
1) Be careful not to make scratch and molding
damage!
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
349159386.005.png 349159386.006.png 349159386.007.png
Exploded View and Parts List
9
10
1) Disconnect slide FPCB connector from PBA.
※ caution
1) Be careful not to make scratch and molding
damage!
2) Be careful of damage to the FPCB.
1)Unscrew 6 points from Front case and then
disjoint the Front case.
※ caution
1) Be careful not to make scratch and molding
damage!
11
12
1)Unscrew 2 points from the Lower.
※ caution
1) Be careful not to make scratch and molding
damage!
1)Lift up sides of Lower and disjoint it.
※ caution
1) Be careful not to make scratch and molding
damage!
7-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
349159386.008.png 349159386.009.png 349159386.010.png 349159386.011.png 349159386.012.png
Exploded View and Parts List
13
14
1) 1)Remove an electric tape on the back of LCD.
※ caution
1) Be careful not to make scratch and molding
damage!
2) Be careful of damage to the FPCB.
1)Remove LCD ASS'Y from the upper.
※ caution
1) Be careful not to make scratch and molding
damage!
7-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
349159386.013.png 349159386.014.png 349159386.015.png 349159386.016.png 349159386.017.png 349159386.018.png
Exploded View and Parts List
7-2. Assembly
1
2
1)Insert Slide FPCB into connector.
2)Solder the side pads of Slide FPCB.
※ caution
1) Be careful not to make scratch and molding
the!
2) Be careful of damage to the FPCB.
1)Attach Slide FPCB on the back of LCD..
※ caution
1) Be careful not to make scratch and molding
damage!
2) When attaching check the guideline.
3
4
1)Insert VGA FPCB into connector.
2)Attach VGA FPCB on the back of LCD.
※ caution
1) Be careful not to make scratch and molding
damage!
2) Be careful of damage to the FPCB.
1)Let the Sub keypad be on the UPPER
※ caution
1) Be careful not to make scratch and molding
damage!
7-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
349159386.019.png 349159386.020.png 349159386.021.png 349159386.022.png 349159386.023.png 349159386.024.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin