Firmware Update.pdf

Firmware update

4. Firmware update

4-1 Product reset

■ This describes how to reset the camera to factory default setting.

1. First turn on the power of the camera.

Power oN

Fig. 4-1

2. Press the q Zoom button + Shutter button and then turn the w POWER off.

w Power oFF

q Zoom ButtoN + Shutter ButtoN

Fig. 4-2

3. Turn the power of the camera on again to check whether it has been reset.

Fig. 4-3

SAMSUNG

This Document can not be used without Samsung’s authorization

4-1

Firmware update

4-2 Version check

■ This describes how to check the version of the current irmware of the camera.

1. Use fully charged batteries for power.

2. First turn off the power of the camera.

3. Press the q Zoom button + Shutter button and then turn the w Power ON.

w Power oN

q Zoom ButtoN + Shutter ButtoN

Fig. 4-4

4. Check the version of the irmware and then turn the power off.

Fig. 4-5

4-2

This Document can not be used without Samsung's authorization

SAMSUNG

Firmware update

4-3 Upgrade

♦ How to execute the irmware

The irmware is conigured in the following structure.

Code area is where the execution codes to operate the camera are located, and the Partition [1:3] area is where the various resources

necessary to operate the camera are saved. Among these areas, Partition 3 area is where the Defective Pixel adjustment data and

Lens Shading adjustment data are saved.

User Area is where the setting values are saved through the menu when the user uses the camera, and the adjusted data through

integrated process is saved.

code

partition1

partition2

partition3

User Area

► Reference of general version:

- As the version to update the Code + Partition [1:2] area, this protects both the adjusted data saved in the User Area and

the Partition 3 area.

1. Insert the SD card containing the irmware data ile and Upgrade Script ile into the camera.

* You need two iles to upgrade the FW and the required iles are FW data ile and Upgrade Script ile.

* Because all data saved on the FLASH memory will be reset when you upgrade the irmware, back up

your data before proceeding with the upgrade.

2. Use the AC adaptor or fully charged batteries for the power.

* You can proceed with the upgrade only when the battery level is full (Icon showing full up to 3rd level).

3. Turn on the power of the camera.

Power oN

Fig. 4-6

4. The version of the FW to upgrade will be displayed on the LCD screen. When you press the SHUTTER button,

the FW upgrade will start.

Fig. 4-7

SAMSUNG

This Document can not be used without Samsung’s authorization

4-3

Firmware update

5. The progress of the FIRMWARE upgrade will be displayed on the LCD and the upgrade will proceed.

Fig. 4-8

6. When the upgrade is completed, the camera will automatically be turned off.

4-4

This Document can not be used without Samsung's authorization

SAMSUNG

Firmware update

4-4 Full upgrade

♦ How to execute the FULL irmware

The irmware is conigured in the following structure.

Code area is where the execution codes to operate the camera are located, and the Partition [1:3] area is where the various resources neces

sary to operate the camera are saved. Among these areas, Partition 3 area is where the Defective Pixel adjustment data and Lens Shading

adjustment data are saved.

User Area is where the setting values are saved through the menu when the user uses the camera, and the adjusted data through integrated

process is saved.

code

partition1

partition2

partition3

User Area

► Reference of FULL version:

- As the version to update the Code + Partition [1:3] area, this protects the adjusted data saved in the User Area but resets the Defective

Pixel adjustment data and Lens Shading adjustment data. Therefore, you must recover the to previously adjusted data by readjusting

or by backing up the adjusted data.

- When executing a FULL version upgrade, the adjusted data will automatically be saved to the SD card and you

can upload the adjusted data back to the camera by referring to the following detail method.

- Adjusted data automatically saved to the SD card is composed of 3 files; LSCLUTO.BIN, DefectivePixel0.bin

and DefectivePixel1.bin.

1. Insert the SD card containing the FULL FW data file and Upgrade Script file into the camera.

* You need two files for FULL FW upgrade and the required files are FULL FW data file and Upgrade Script file.

* Because all data saved on the FLASH memory will be reset when you upgrade the firmware, back up your data before proceeding with the

upgrade.

2. Use the AC adaptor or fully charged batteries for the power.

- You can proceed with the upgrade only when the battery level is full (Icon showing full up to 3rd level).

3. Turn on the power of the camera.

Power oN

Fig. 4-9

SAMSUNG

This Document can not be used without Samsung’s authorization

4-5

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: