1n40xx.pdf

(34 KB) Pobierz
1N4001
1N4001, 1N4002, 1N4003,
1N4004, 1N4005, 1N4006,
1N4007 1N4004 and 1N4007 are Preferred Devices
Axial Lead Standard
Recovery Rectifiers
http://onsemi.com
This data sheet provides information on subminiature size, axial
lead mounted rectifiers for general–purpose low–power applications.
LEAD MOUNTED RECTIFIERS
50–1000 VOLTS
DIFFUSED JUNCTION
Mechanical Characteristics
•
Case: Epoxy, Molded
•
Weight: 0.4 gram (approximately)
•
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•
Lead and Mounting Surface Temperature for Soldering Purposes:
220
CASE 59–03
AXIAL LEAD
PLASTIC
C Max. for 10 Seconds, 1/16
,
from case
•
Shipped in plastic bags, 1000 per bag.
•
Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to
the part number
MARKING DIAGRAM
•
Available in Fan–Fold Packaging, 3000 per box, by adding a “FF”
suffix to the part number
AL
1N
400x
YYWW
•
Polarity: Cathode Indicated by Polarity Band
•
Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006,
1N4007
AL = Assembly Location
1N400x = Device Number
x
= 1, 2, 3, 4, 5, 6 or 7
YY
= Year
MAXIMUM RATINGS
Rating
WW
= Work Week
Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007
Unit
*Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V RRM
V RWM
V R
50
100
200
400
600
800
1000
Volts
*Non–Repetitive Peak Reverse Voltage
(halfwave, single phase, 60 Hz)
V RSM
60
120
240
480
720
1000
1200
Volts
*RMS Reverse Voltage
V R(RMS)
35
70
140
280
420
560
700
Volts
*Average Rectified Forward Current
(single phase, resistive load,
60 Hz, T A = 75 ° C)
I O
1.0
Amp
*Non–Repetitive Peak Surge Current
(surge applied at rated load
conditions)
I FSM
30 (for 1 cycle)
Amp
Operating and Storage Junction
Temperature Range
T J
T stg
–65 to +175
° C
*Indicates JEDEC Registered Data
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Semiconductor Components Industries, LLC, 2001
March, 2001 – Rev. 7
1
Publication Order Number:
1N4001/D
°
W
214192671.010.png 214192671.011.png 214192671.012.png 214192671.013.png 214192671.001.png 214192671.002.png
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
ELECTRICAL CHARACTERISTICS*
Rating
Symbol
Typ
Max
Unit
Maximum Instantaneous Forward Voltage Drop
(i F = 1.0 Amp, T J = 25
v F
0.93
1.1
Volts
°
C)
Maximum Full–Cycle Average Forward Voltage Drop
(I O = 1.0 Amp, T L = 75 ° C, 1 inch leads)
V F(AV)
–
0.8
Volts
Maximum Reverse Current (rated dc voltage)
(T J = 25 ° C)
(T J = 100 ° C)
I R
m A
0.05
1.0
10
50
Maximum Full–Cycle Average Reverse Current
(I O = 1.0 Amp, T L = 75 ° C, 1 inch leads)
I R(AV)
–
30
m A
*Indicates JEDEC Registered Data
ORDERING & SHIPPING INFORMATION
Device
Package
Shipping
1N4001
Axial Lead
1000 Units/Bag
1N4001FF
Axial Lead
3000 Units/Box
1N4001RL
Axial Lead
5000/Tape & Reel
1N4002
Axial Lead
1000 Units/Bag
1N4002FF
Axial Lead
3000 Units/Box
1N4002RL
Axial Lead
5000/Tape & Reel
1N4003
Axial Lead
1000 Units/Bag
1N4003FF
Axial Lead
3000 Units/Box
1N4003RL
Axial Lead
5000/Tape & Reel
1N4004
Axial Lead
1000 Units/Bag
1N4004FF
Axial Lead
3000 Units/Box
1N4004RL
Axial Lead
5000/Tape & Reel
1N4005
Axial Lead
1000 Units/Bag
1N4005FF
Axial Lead
3000 Units/Box
1N4005RL
Axial Lead
5000/Tape & Reel
1N4006
Axial Lead
1000 Units/Bag
1N4006FF
Axial Lead
3000 Units/Box
1N4006RL
Axial Lead
5000/Tape & Reel
1N4007
Axial Lead
1000 Units/Bag
1N4007FF
Axial Lead
3000 Units/Box
1N4007RL
Axial Lead
5000/Tape & Reel
http://onsemi.com
2
214192671.003.png 214192671.004.png 214192671.005.png
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 59–03
ISSUE M
B
NOTES:
1. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO-41 OUTLINE SHALL APPLY.
2. POLARITY DENOTED BY CATHODE BAND.
3. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.
D
K
MILLIMETERS
INCHES
F
DIM MIN MAX MIN MAX
A 4.07
5.20
0.160
0.205
B 2.04
2.71
0.080
0.107
A
D 0.71
0.86
0.028
0.034
F ---
1.27
---
0.050
K 27.94
---
1.100
---
F
K
http://onsemi.com
3
214192671.006.png 214192671.007.png
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
NORTH AMERICA Literature Fulfillment :
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone : 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax : 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email : ONlit@hibbertco.com
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support : 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone : (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)
Email : ONlit–german@hibbertco.com
French Phone : (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)
Email : ONlit–french@hibbertco.com
English Phone : (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)
Email : ONlit@hibbertco.com
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, UK, Ireland
CENTRAL/SOUTH AMERICA:
Spanish Phone : 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email : ONlit–spanish@hibbertco.com
Toll–Free from Mexico: Dial 01–800–288–2872 for Access –
then Dial 866–297–9322
ASIA/PACIFIC : LDC for ON Semiconductor – Asia Support
Phone : 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email : ONlit–asia@hibbertco.com
JAPAN : ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone : 81–3–5740–2700
Email : r14525@onsemi.com
ON Semiconductor Website : http://onsemi.com
For additional information, please contact your local
Sales Representative.
http://onsemi.com
4
1N4001/D
214192671.008.png 214192671.009.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin