Circuit Maker Instrukcja Obsługi EN.pdf

CircuitMaker

for Windows

Integrated Schematic Capture

and Circuit Simulation

User Manual

CircuitMaker 6

CircuitMaker PRO

Revision C

Information in this document is subject to change without notice and does not represent a

commitment on the part of MicroCode Engineering. The software described in this document is

furnished under a license agreement or nondisclosure agreement. The software may be used or

copied only in accordance with the terms of the agreement. It is against the law to copy the

software on any medium except as specifically allowed in the license or nondisclosure agreement.

The purchaser may make one copy of the software for backup purposes. No part of this manual

may be reproduced or transmitted in any form or by any means, electronic or mechanical,

including photocopying, recording, or information storage and retrieval systems, for any

purpose other than the purchaser’s personal use, without the express written permission of

MicroCode Engineering.

Printed in the United States of America

CircuitMaker, TraxMaker and SimCode are trademarks or registered trademarks of MicroCode

Engineering, Inc. All other trademarks are the property of their respective owners.

MicroCode Engineering, Inc.

927 West Center

Orem UT 84057 USA

Phone (801) 226-4470

FAX (801) 226-6532

www.microcode.com

MicroCode Engineering—Software License Agreement

PLEASE READ THE FOLLOWING LICENSE AGREEMENT CAREFULLY BEFORE OPEN-

ING THE ENVELOPE CONTAINING THE SOFTWARE. OPENING THIS ENVELOPE INDICATES

THAT YOU HAVE READ AND ACCEPTED ALL THE TERMS AND CONDITIONS OF THIS

AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS IN THIS AGREEMENT, PROMPTLY

RETURN THIS PRODUCT FOR A REFUND.

CircuitMaker is a proprietary product of MicroCode Engineering and is protected by Copyright

Law. MicroCode Engineering grants you a non-exclusive license to use CircuitMaker subject to

the terms and restrictions of this license agreement. You are receiving a license to use

CircuitMaker, MicroCode Engineering retains title to CircuitMaker and is the sole copyright

owner. You, as an authorized end user of CircuitMaker are permitted certain rights to use

CircuitMaker as defined in this license agreement.

• You are authorized to use CircuitMaker on only one (1) computer at a time. You must obtain

additional license agreements before using the software on additional computers or on a

computer network.

• You may make a backup copy of CircuitMaker for the sole purpose of protecting your

investment from loss.

• You may transfer your right to use CircuitMaker to another party as long as the entire

software package, including the manual and a backup copy of CircuitMaker, are transferred

to the receiving party. However, before transferring this program, the receiving party must

agree to be bound by the terms and conditions of this agreement. If you transfer the

program, you must remove CircuitMaker from the computer on which it is installed and

destroy the backup copy at the time of transfer. Your licence terminates at the time of

transfer. In no case is the right granted to sell, distribute, trade or give away copies of

CircuitMaker, except as stated in this paragraph.

• You may not de-compile, disassemble, reverse engineer, or in any way modify the program

code without the prior written consent of MicroCode Engineering.

• This agreement is effective until terminated. You may terminate this agreement at any time by

destroying the program, documentation, and any the backup copy, or by returning the same

to MicroCode Engineering. The licence will terminate automatically if the terms of this

agreement are violated.

The program code is provided on an “as is” basis without warranty of any kind whatsoever,

either expressed or implied. MicroCode Engineering does not warrant the software to be error

free, nor does it warrant it to meet your specific requirements.

License Agreement iii

MicroCode Engineering will, at no charge, replace defective CDs/diskettes or CDs/diskettes that

are returned within ninety (90) days of the date of purchase. MicroCode Engineering warrants

that the program will perform in substantial compliance with the enclosed documentation. If you

report a significant defect in writing to MicroCode Engineering, and MicroCode Engineering is

unable to correct it within ninety (90) days, you may return the entire software package for a

refund. Under no conditions will MicroCode Engineering’s liability exceed the purchase price of

this software.

NO LIABILITY OF ANY FORM SHALL BE ASSUMED BY MICROCODE ENGINEERING OR ITS

REPRESENTATIVES, NOR SHALL DIRECT, CONSEQUENTIAL, OR OTHER DAMAGES BE

ASSUMED BY MICROCODE ENGINEERING, EVEN IF MICROCODE ENGINEERING HAS BEEN

ADVISED OF SUCH DAMAGES.

Disclaimer

CircuitMaker is a simulation program that, in most cases, produces results very similar to a real

life circuit. It is, however, only a simulation program and is not expected to provide exactly the

same results as a real life circuit in every instance. While MicroCode Engineering, Inc. has tried

to provide a product which is suitable to a wide variety of applications, we realize that it cannot

produce satisfactory results in all applications. CircuitMaker allows you to minimize the amount

of breadboarding required to produce a functional circuit, but it must not be used as a replace-

ment for proper breadboarding.

MicroCode Engineering, Inc. reserves the right to revise the program and/or manual from time to

time without obligation of MicroCode Engineering, Inc. to notify any person or organization of

such change or revision. MicroCode Engineering, Inc. makes no representations or warranties

with respect to the program “CircuitMaker” or the manual, either express or implied, including

implied warranty of merchantability or implied fitness for a particular purpose. No liability of any

form shall be assumed by MicroCode Engineering, Inc. or its representatives, nor shall direct,

consequential, or other damages be assumed by MicroCode Engineering, Inc. even if MicroCode

Engineering, Inc. has been advised of such damages. This program is supplied “As Is”. Any

user of this software uses it at their own risk. In any case, the liability of MicroCode Engineering,

Inc. is limited to the price the user actually paid.

License Agreement iv

U.S. Government Restricted Provisions

If this software is acquired by or in behalf of a unit or agency of the United States Government

these provisions apply. This Software:

(a) Was developed at private expense, and no part of it was developed with government funds,

(b) Is a trade secret of MicroCode Engineering, Inc. for all purposes of the Freedom of Informa-

tion Act,

between the vendor and the governmental entity, and

(d) In all respects is proprietary data belonging solely to MicroCode Engineering, Inc.

For units of the Department of Defense (DOD), this software is sold only with “Restricted

Rights” as that term is defined in the DOD Supplement to the Federal Acquisition Regulations,

52.227-7013 (c) (1) (ii) and:

Use, duplication or disclosure is subject to restrictions as set forth in subdivision (c) (1) (ii) of

the Rights in Technical Data and Computer Software clause at 52.227-7013. Manufacturer:

MicroCode Engineering, Inc., 927 West Center Street, Orem, Utah 84057.

If this software was acquired under a GSA Schedule, the U.S. Government has agreed to refrain

from changing or removing any insignia or lettering from the Software or the accompanying

written materials that are provided or from producing copies of the manuals or disks (except one

copy for backup purposes) and:

(e) Title to and ownership of this Software and documentation and any reproductions thereof

shall remain with MicroCode Engineering, Inc.,

(f) Use of this Software and documentation shall be limited to the facility for which it is acquired,

and

(g) If use of the Software is discontinued by the installation specified in the purchase/delivery

order and the U.S. Government desires to use it at another location, it may do so by giving prior

written notice to MicroCode Engineering, Inc., specifying the type of computer and new location

site. U.S. Governmental personnel using this Software, other than under a DOD contract or GSA

Schedule, are hereby on notice that use of this Software is subject to restrictions which are the

same or similar to those specified above.

License Agreement v

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: