Samsung SCH-811 service manual.pdf

(2575 KB) Pobierz
Samsung SCH-811 service manual
CDMA CELLULAR
TELEPHONE
SCH-811
SERVICE
Manual
CDMA CELLULAR TELEPHONE
CONTENTS
1. General Introduction
2. Specification
3. Installation
4. NAM Programming
5. Product Support Tools
6. Troubleshooting
7. Exploded view and its Part List
8. Electrical Parts List
9. PCB diagrams
10. Block & circuit diagrams
SAMSUNG PROPRIETARY-CONTENTS MAY CHANGE WITHOUT NOTICE
141227912.007.png 141227912.008.png 141227912.009.png 141227912.010.png 141227912.001.png
ELECTRONICS
Samsung Electronics Co.,Ltd.
GH68-00398A
1999. 3. REV. 1.0
141227912.002.png
1. General Description
The SCH-811 cellular phone functions as both analog cellular phone working in AMPS (Advanced Mobile
Phone Service) mode and digital cellular phone working in CDMA (Code Division Multiple Access) mode.
CDMA type digital mode applies DSSS (Direct Sequential Spread spectrum) mode which first came to be used
in the military.
The DSSS reduces channel cross talk and allow to use one frequency channel by multiple users in the same
specific area, resulting in increase of channel capacity to about ten times compared to that of analog mode
currently used.
Soft/Softer Handoff, Hard Handoff, and Dynamic RF Power Control technologies are combined into this phone
to reduce the call drop while usage.
CDMA digital cellular network consists of MSO (Mobile Switching Office), BSC (Base Station Controller),
BTS(Base Station Transmission System), and MS (Mobile Station). MS meets the specifications of the below:
E
IS-95A : Mobile Station-Base Station Compatibility Standard for Dual-Mode Wideband Spread Spectrum
Cellular System
E
IS-96A : Speech Service Option 1 Standard for Dual-Mode Wideband Spread Spectrum Cellular Systems
E
IS-98A : Standards for Dual-Mode Wideband Spread Spectrum Cellular Mobile Station
E
IS-126 : Mobile Station Loopback Service Options Standard
SCH-811 is composed of main handset, rapid charger, three batteries (1600 mAh, 1000 mAh, 550mAh), hands-
free kit, car adaptor, and travel charger. Hands-Free Kit is designed to be operated in full-duplex mode taking
turn-around delay between the phone and the system into account.
SAMSUNG Proprietary-Contents may change without notice
1-1
141227912.003.png 141227912.004.png
 
2. Specification
2-1 General
Frequency Range
Digital Mode
Analog Mode
Transmitter
: 824 ~ 849 MHz
824 ~ 849 MHz
Receiver
: 869 ~ 894 MHz
869 ~ 894 MHz
Channel Spacing
: 1.23 MHz
30kHz
Number of Channels
: 20 FA
832CHs
Duplex Spacing
: 45 MHz
45MHz
Frequency Stability
: °2.5 ppm (-20úC ~ +60úC, -4úF ~ +140úF)
Operating Temperature
: -30úC~+60úC (-4úF ~ +140úF)
Operating Voltage
HHP : 3.6V DC (°10%)
Hands-free : 13.7V DC (°10%)
Size and Weight : 88.0 x 56.5 x 26.7/27.6/31.3 mm
including slim battery : 117.3 g
including standard battery : 145.2 g
including extended battery : 160.5 g
Operating Time
Digital Mode Standby Time
: up to 36 hours (with slim battery)
: up to 65 hours (with standard battery)
: up to 100 hours (with extended battery)
Talk Time
: up to 75 min (with slim battery)
: up to 150min (with standard battery)
: up to 240min (with extended battery)
2-1
SAMSUNG Proprietary-Contents may change without notice
141227912.005.png
2-2 Digital Mode
Waveform Quality
0.944 or more
Time Reference
°1uS or less
Rx Sensitivity and Dynamic Range
-104dBm, FER=0.5% or less
-25dBm, FER=0.5% or less
Tx Output Power
320mW (25dBm)
Tx Frequency Deviation
°300Hz or less
Occupied Band Width
1.32MHz
Tx Conducted Spurious Emission
900KHz : -42dBc / 30KHz below
1.98MHz: -54dBc / 30KHz below
Minimum Tx Power Control
below -50dBm
-25dBm: -57.0dBm ~ -38.5dBm
Open Loop Power Control
-65dBm: -17.5dBm ~ + 1.5dBm
-104dBm: +18.0dBm ~ +30.0dBm
Standby Output Power
below -61dBm
Test1: °24dB or less
Test2: 0mS ~ 2.5mS
Colsed Loop Tx Power Control Range
Test3: °24dB or more
Test4: °24dB or more
Test5: °24dB or more
SAMSUNG Proprietary-Contents may change without notice
2-2
141227912.006.png
 
Zgłoś jeśli naruszono regulamin