VOYAGER 2002 petrol NO.pdf

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE CHRYSLER

MOD. VOYAGER YEAR. 02 ﬁ

PETROL

DIESEL

ALARM/SIREN

POSITION

Position the compact alarms and the sirens under the driver’s side headlamp.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard, on the left, under the

steering wheel.

POWER SUPPLY

+30: Connect to the WHITE/RED wire in the 4 way connector, on the left of the rudder

pedals.

-31: Connect to one of the ground terminals.

IGNITION WIRE

+15/54: Connect to the wire, at the position nr.3, in the 5 way connector, under the covering

behind the steering wheel.

DIRECTION INDICATORS

Connect to the WHITE/GREEN wire at the position nr.1, to the WHITE/GREEN wire at the

position nr.2, to the WHITE/BROWN wire at the position nr.3, to the WHITE/BLACK wire at

the position nr. 4, in the 34 way black/green connector, in the central placed on the left of the

rudder pedals.

Note: divide the lines with diodes.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the ORANGE/WHITE wire at the position nr. 8, in the 16 way green connector, on the

driver’s side push button panel.

Front window, passenger’s side:

cut the ORANGE/GREY wire at the position nr.4, in the 16 way green connector, on the

driver’s side push button panel or on the coming out of the driver’s side door.

Rear window, driver’s side:

cut the ORANGE/ BLUE wire at the position nr.3, in the 16 way green connector, on the

driver’s side push button panel or on the coming out of the driver’s side door.

Rear window, passenger’s side:

cut the ORANGE/GREY wire at the position nr. 5, in the 16 way green connector, on the

driver’s side push button panel or on the coming out of the driver’s side door.

CENTRAL DOORS LOCKING

Negative control signal

Connect to the VIOLET/GREEN wire at the position nr. 22, in the 34 way black/white

connector, placed on the left of the rudder pedals. Refer to the diagram nr. 158.

IMMOBILISATION POINT

Fuel pump

Cut the BROWN wire, at the position nr.8, in the 20 way connector, placed in the fuse box

and relay, in the driver’s side engine compartment.

STARTER

+50: Cut the GREEN/ORANGE wire, at the position nr. 14, in the 34 way black/white

connector, in the central placed on the left of the rudder pedals.

BONNET SWITCH

Connect to the VIOLET/BLUE wire at the position nr. 30, in the 34 way black/white connector,

in the central placed on the left of the rudder pedals.

DOORS SWITCH

Connect to the VIOLET/YELLOW wire at the position nr. 5, to the VIOLET wire at the

position nr. 6, to the VIOLET/WHITE wire at the position nr. 7, to the VIOLET/GREY wire at

the position nr. 8, in the 34 way black/white connector, in the central placed on the left of the

rudder pedals.

Note: Divide the lines with diodes.

BOOT SWITCH

Connect to the VIOLET/ORANGE wire, at the position nr. 29, in the 34 way black/white

connector, in the central placed on the left of the rudder pedals.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

chvoy02gbb.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N° 158

Diagram to make the central locking on

CHRYSLER VOYAGER year 2002

VIOLET

ORANGE

VIOLET/ORANGE

Resistance Resistance

5600 Ohm 1500 Ohm

VIOLET/GREEN

Pos. nr. 22

Ground 34 way black/white connector, on the left of the

rudder pedals under the driver’s side dashboard

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

chvoy02gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: