minutia.pdf

Berroco® Free Pattern | Minutia

12/17/2007 12:36 PM

Minutia knit in Ultra™ Alpaca Light

Skill level: Easy

Twelve miniature sweater ornaments knit in Ultra™Alpaca Light.

PDF Pattern Instructions

(If you can’t open this PDF file you need Adobe Acrobat Reader. Get it here .)

NOTE 1

We made the hangers for these mini sweaters using 16 gauge colored wire. For each

hanger, cut a 12” long piece of wire. Bring the 2 ends together. 2” down from the

http://www.berroco.com/exclusives/minutia/minutia.html

Page 1 of 14

Berroco® Free Pattern | Minutia

12/17/2007 12:36 PM

hanger, cut a 12” long piece of wire. Bring the 2 ends together. 2” down from the

ends, twist the 2 pieces together once to hold them in place. Shape the loop at the

bottom into a hanger shape (the same as a wire coat hanger - flat across the bottom

and rounded at each end). Continue to twist the 2 ends tog all the way to the end.

Bend the twisted end into a hook.

NOTE 2

There are no gauge requirements for these projects

MATERIALS

1 Hank BERROCO ULTRA ALPACA LIGHT (50 grs), #4294 Turquoise Mix

Straight knitting needles, size 6 (4.00 mm)

1 Set (4) double pointed knitting needles (dpn), size 5 (3.75 mm)

Cable needle (cn)

2 St markers

STITCH GLOSSARY

CB6

Sl 3 sts to cn and hold in BACK, k3, then k3 from cn

CABLE PATTERN (Worked over 13 sts)

Row 1 (RS): K6, p1, k6.

Row 2 and all WS rows: P6, k1, p6.

Row 3: Rep Row 1.

Row 5: CB6, p1, CB6.

Row 6: Rep Row 2.

Rep these 6 rows for Cable Pat.

NOTE

Body and sleeves are worked all in one piece from lower back edge to lower right edge.

BODY

With straight needles, cast on 19 sts.

Establish Pat: Row 1 (RS): P1, k1, p1, place marker, work Row 1 of Cable Pat over

13 sts, place marker, p1, k1, p1.

Row 2: P1, k1, p1, work Row 2 of Cable Pat over 13 sts, p1, k1, p1. Work even in Pat

as established until piece measures approximately 2 1/4” from beg, end on Row 6 of

Cable Pat.

Beg Sleeves: Cast on 6 sts at beg of the next 2 rows – 31 sts. Keeping 9 sts at each

end in Seed St as established and remaining sts in Cable Pat, work even until piece

measures 3 1/4” from beg, end on WS.

Shape Neck: Next Row (RS): Work 11 sts, join another hank of yarn and bind off

center 9 sts, work to end – 11 sts each side. Working both sides at once with separate

hanks of yarn, work 1 row even.

http://www.berroco.com/exclusives/minutia/minutia.html

Page 2 of 14

Berroco® Free Pattern | Minutia

12/17/2007 12:36 PM

hanks of yarn, work 1 row even.

Following Row (RS): Work 11 sts, cast on 9 sts over sts bound off previously for

neck, drop 2nd hank of yarn and work to end – 31 sts. Work even in pat as established

until piece measures 1” above cast-on sts, end on WS.

End Sleeves: Bind off 6 sts at beg of the next 2 rows – 19 sts. Work even in pat as

established until piece measures 2 1/4” above bound-off sts, end on WS. Bind off.

FINISHING

Sew side and sleeve seams.

Neckband: With RS facing, using dpn’s, beg at left shoulder, pick up and k20 sts

around entire neck edge. Divide onto 3 needles. Mark for beg of rnd and carry marker

up. Knit 3 rnds.

Next Rnd: * K1, p1, rep from * around.

Following Rnd: * P1, k1, rep from * around. Bind off. Fold neckband down to RS.

MATERIALS

1 Hank each BERROCO ULTRA

ALPACA LIGHT (50 grs), #4201

Winter White (MC) and #4226

Pumpkin Puree (A). Small

amount each #4287 Denim Mix

(B) and #4275 Pea Soup Mix

(C)

Straight knitting needles, size 5

(3.75 mm)

1 Set (4) double pointed

knitting needles (dpn), size 5

(3.75 mm)

Three 3/8” buttons

2 St holders

NOTE

Body is worked in one piece to

underarm then divided for

armholes.

NOTE 2

When changing colors, hold

yarn to the left and pick up

new color from underneath. This twists yarn so there are no holes. When carrying

yarn across more than 3 sts, twist colors tog on WS to avoid long loops.

BODY

With straight needles, using MC, cast on 29 sts.

http://www.berroco.com/exclusives/minutia/minutia.html

Page 3 of 14

Berroco® Free Pattern | Minutia

12/17/2007 12:36 PM

Ribbing: Row 1 (RS): K1, * p1, k1, rep from * across.

Row 2: P1, * k1, p1, rep from * across. Rep Row 1 once more, inc 6 sts across, end

on WS – 35 sts.

Next Row (RS): (K1, p1) twice, work Row 1 of chart to last 4 sts, (p1, k1) twice.

Keeping 4 sts at each side in ribbing as established for frontbands and working

remaining sts in St st following chart, work even until piece measures 2 1/2” from beg,

end on Row 15 of chart.

Divide for Back and Fronts: Next Row (RS): Work 9 sts and sl these sts to holder

for right front; bind off 2 sts, work 13 sts for back, sl remaining 11 sts to holder for left

front – 13 sts. Work even in St st following chart until piece measures approximately 3

1/4” from beg and chart has been completed, end on WS. Bind off.

Right Front: With WS facing, sl 9 sts from holder to straight needle. Work in pat as

established until Row 21 of chart has been completed, end on WS.

Shape Neck: Next Row (RS): Work 4 sts, sl these sts onto holder, work to end – 5

sts. Dec 1 st at neck edge every RS row twice – 3 sts. Work even until chart has been

completed, end on WS. Bind off.

Left Front: With RS facing, sl 11 sts from holder to straight needle. Join yarn and

bind off 2 sts, work to end – 9 sts. Complete to correspond to right front, reversing

neck shaping. Sew shoulder seams.

SLEEVES

With RS facing, using dpn’s and MC, pick up and k15 sts around entire armhole. Divide

onto 3 needles. Mark for beg of rnd and carry marker up. Work even in St st (k EVERY

rnd) for 1 1/2”, dec 1 st at end of last rnd – 14 sts. Work even in k1, p1 ribbing for 2

rnds. Bind off.

FINISHING

Neckband: With RS facing, sl 4 sts from right front holder to straight needles, join MC

and pick up and k15 sts to left front holder, work 4 sts from left front holder in ribbing

as established. Beg with Row 2, work in ribbing same as body for 3 rows. Bind off in

ribbing. Lap right frontband over left frontband and sew on 3 buttons, sewing through

both frontbands.

MATERIALS

1 Hank each BERROCO ULTRA ALPACA LIGHT (50 grs), #4285 Oceanic Mix (MC) and

#4234 Cardinal (CC)

Straight knitting needles, size 5 (3.75 mm)

Crochet hook, size 4.00 mm (F)

FRONT

With straight needles, using MC, cast on 14 sts. Knit 4 rows. * Change to CC and knit

2 rows. Change to MC and knit 4 rows. Rep from * twice more. Change to CC and knit

2 rows. Change to MC.

http://www.berroco.com/exclusives/minutia/minutia.html

Page 4 of 14

Berroco® Free Pattern | Minutia

12/17/2007 12:36 PM

Shape Sleeves: Cast on 6 sts at beg of the next 2 rows – 26 sts. Knit 2 rows.

Change to CC and knit 2 rows. Change to MC and knit 4 rows. Change to CC and knit 2

rows. Bind off.

BACK

Work same as front.

FINISHING

Sew shoulder/top of sleeve seams leaving center 8 sts on front and back open for neck.

Cuffs: With RS facing, using straight needles and CC, pick up and k13 sts along end of

sleeve. Knit 1 row. Bind off. Sew side and sleeve seams.

Neck Edging: With RS facing, using crochet hook and CC, beg at left shoulder seam,

work in sc around entire neck edge. Join with a sl st in first sc. Fasten off. With

crochet hook and CC, make a chain 5” long. Fasten off. Tie chain around center front

of neckband as in photo.

MATERIALS

1 Hank each BERROCO ULTRA ALPACA LIGHT (50 grs), #4234 Cardinal (A) and #4245

Pitch Black (B)

Straight knitting needles, size 6 (4.00 mm)

Crochet hook, size 4.00 mm (F)

NOTE 1

When changing colors, hold yarn to the left and pick up new color from underneath.

This twists yarn so there are no holes.

NOTE 2

Body is worked in one piece from lower back edge to lower front edge.

BODY

With straight needles, using A, cast on 6 sts; join B and cast on 6 sts – 12 sts. Knit 2

rows with colors as established. Work in St st, still using colors as established, until

piece measures 2” from beg, end on WS. Mark beg and end of last row for beg of

armholes.

Next Row (RS): Reversing colors, k6 with A, then k6 with B. Work even using colors

as established until armholes measure 1”, end on WS.

Shape Neck: Next Row (RS): K3 with A, join another hank of B and bind off center

6 sts, k to end – 3 sts each side. Purl 1 row using colors as established.

Following Row (RS): K3 with A, cast on 3 sts; join B and cast on 3 sts, k to end – 12

sts. Beg with a p row, work even in St st using colors as established until piece

measures 1” above cast-on sts, end on WS. Mark beg and end of last row for end of

armholes.

http://www.berroco.com/exclusives/minutia/minutia.html

Page 5 of 14

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: