F5manual-(reader).pdf

(3096 KB) Pobierz

439479321 UNPDF

• Large Display Screen

• Continual Visual Indication of

Important Parameters:

Target Identification

Target Confidence

Target Depth

Ground Phase

Detector’s Internal Ground Setting

• Three Search Modes

Discrimination

All Metals Autotune

Static PinPoint

• Computerized and Manual

Ground Balancing

• Waterproof 9 3 / 4 ” open-frame

concentric elliptical search coil

• Controls

Ground Balance

Frequency

Discrimination

Notch

Threshold

Tones

Gain

Phase Lock

Pinpoint

439479321.050.png

439479321.056.png

439479321.057.png

TABLE OF CONTENTS

Setting Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Quick-Start Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-11

Phase Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Notch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Pinpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Gnd Bal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Discrim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11

Ground Balancing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-15

Ground Balancing -Technical Information . . . . . . . . .13-15

Audio Target Identification System . . . . . . . . . . . . . . . . .16

Depth and Target Display . . . . . . . . . . . . . . . . . . . . . .17-18

Target Readout Table . . . . . . . . . . . . . . . . . . . . . . . .18

Understanding the Display . . . . . . . . . . . . . . . . . . . . . .19-20

Mode Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Target Categories . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Discrimination Indicators . . . . . . . . . . . . . . . . . . . . . .19

Target ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Confidence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Battery Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

% Fe 3 O 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Search Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Target Verification . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Pinpointing with motion modes . . . . . . . . . . . . . . . .21

Target Pinpointing (No motion) . . . . . . . . . . . . . . . . . . . . .22

Unit Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

2

439479321.058.png

SETTING UP

No tools required.

1 Insert the lower stem (plastic tube) into the middle stem.

2 Position the stems with the silver buttons toward the

back.

Using the bolt and knob, attach the search coil to

the lower stem.

3 Press the button on the middle stem, and slide the

stem assembly into the s-rod.

Adjust the stem to a length that lets you

maintain a comfortable upright posture, with

your arm relaxed at your side, and the search

coil parallel to the ground in front of you.

4 Wind the cable securely around the stem.

5 Insert the plug into the matching

connector on the right underside of the

detector body. Be sure that the key-way

and pins line up correctly.

6 After the stem length is adjusted

to your height, tighten the two

locking collars to stabilize the

stems.

7 Secure the cable to the stem

with Velcro strips at the top and

bottom. Secure one at the bottom of the plastic tube, and one to the

aluminum tube, close to the detector housing. It is important to secure

the cable; a loose cable may result in erratic sounds.

Arm Rest Adjustment

If you wish to change the position of

the arm rest, remove the screw and

move the arm rest to one of the

alternate hole locations.

Caution: Do not force the plug in.

Excess force will cause

damage.

To disconnect the cable, pull

on the plug.

Do not pull on the cable.

3

439479321.001.png

439479321.002.png

439479321.003.png

439479321.004.png

439479321.005.png

439479321.006.png

439479321.007.png

439479321.008.png

439479321.009.png

439479321.010.png

439479321.011.png

439479321.012.png

439479321.013.png

439479321.014.png

439479321.015.png

439479321.016.png

439479321.017.png

BATTERIES

Two 9-Volt batteries are

supplied with the F5.

The batteries have been

inserted backwards in the

compartment for storage

during transportation.

Please remove batteries,

turn them around, and install

correctly.

Use ALKALINE batteries

only.

1 Remove the battery cover

by disengaging the clip at the

back.

Do not hinge door upward; pull

straight back

2 Align the polarity of the batteries correctly, with the positive "+"

toward the coil plug connection, as indicated by the + indicator

on the housing.

3 Insert (2) 9-Volt ALKALINE batteries, with the contacts pointed inward,

and press down on the back of the batteries to snap them into place.

Some brands of batteries will require moderate force to clear the

retaining tabs.

4 Replace the battery door.

Most metal detector problems are due to improperly installed

batteries, or the use of non-alkaline or discharged batteries. If the

detector does not turn on, please check the batteries.

USING HEADPHONES

Using headphones (not supplied) improves

battery life, and prevents the sounds from

annoying bystanders.

It also allows you to hear subtle changes in the

sound more clearly, particularly if searching in a

noisy location. For safety reasons, do not use

headphones near traffic or where other

dangers are present. This device is to be used

with interconnecting cables/headphone

cables shorter than three meters.

4

Do not mix old and new

batteries.

To install the batteries:

439479321.018.png

439479321.019.png

439479321.020.png

439479321.021.png

439479321.022.png

439479321.023.png

439479321.024.png

439479321.025.png

439479321.026.png

439479321.027.png

439479321.028.png

439479321.029.png

439479321.030.png

QUICK-START DEMONSTRATION

1. Supplies Needed

• A Nail

• A Zinc Penny (dated after 1982)

• A Nickel

• A Quarter

2. Position the Detector

a. Place the detector on a

table, with the search

coil hanging over the

edge. (or better, have a

friend hold the detector,

with the coil off the

ground).

b. Keep the search coil

away from walls, floors,

and metal objects.

c. Remove watches, rings

and other jewelry or metal objects from hands and wrists.

d. Turn off appliances or lights that cause electromagnetic

interference.

e. Pivot the search coil back toward the detector body.

3.Power Up

a. Click on the On/Off/Gain knob

b. Set Gain Knob at the 12:00 position

c. Rotate threshold knob to setting= -3

4. Active Discrimination Mode

Click on “Discrim” knob and keep to

left, at lowest setting.

5. Wave each object over the search coil

• Notice the low tone for the nail.

6. Wave a coin close to, then farther away, from the search coil

• Notice that pitch and volume increase as non-ferrous objects get

closer to the search coil.

7.Press the TONES touchpad

Number of tones setting changes to d3.

8.Wave each object over the search coil

Notice the 3 different tones

• Low tone: nail

• Medium tone: nickel and zinc penny

• High tone: quarter

5

439479321.031.png

439479321.032.png

439479321.033.png

439479321.034.png

439479321.035.png

439479321.036.png

439479321.037.png

439479321.038.png

439479321.039.png

439479321.040.png

439479321.041.png

439479321.042.png

439479321.043.png

439479321.044.png

439479321.045.png

439479321.046.png

439479321.047.png

439479321.048.png

439479321.049.png

439479321.051.png

439479321.052.png

439479321.053.png

439479321.054.png

439479321.055.png

Plik z chomika:

Inne pliki z tego folderu:

Geoscan pcb.rar (7662 KB)
Clarke.pdf (4254 KB)
Whites 2000(1).png (11890 KB)
Cheeseman md2.pdf (3311 KB)
Clarke1.pdf (3421 KB)

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin