Epson Stylus Pro 9000 Auto Take-Up Reel Unit Manual.pdf
(
69 KB
)
Pobierz
TU Reel dis.fm
Disassembly of the
Auto Take-Up Reel Unit
This sheet describes how to disassemble the Auto Take-Up Reel option for the EPSON Stylus Pro 9000.
1. Removing the Core Holder
• Remove the C-ring securing the Core Holder
shaft.
• Remove the Core Holder from the shaft.
2. Removing the Cover
• Remove the six screws securing the
cover.
• Remove the cover.
Screws
Screws
Page 1
3. Removing the Control Panel
• Remove the four screws securing the control
panel from the inside.
• Remove the control panel.
Screws
4. Removing the Power Supply Board
• Disconnect the connector from the board.
• Remove the four screws securing the board.
• Remove the board.
Power Supply
Board Screws
5. Removing the Main Board
• Remove the connector from the board.
• Remove the four screws securing the board.
• Remove the board.
Main Board Screws
Page 2
6. Removing the Motor
• Remove the Power Supply Board
• Disconnect the power connector.
• Remove the C-ring from the shaft.
• Remove the four screws securing the motor
frame to the cover.
• Remove the motor frame.
• Remove the three screws securing the motor to
the motor frame.
• Slide the motor sideways to remove it.
Frame Screws
From the
front
Motor Screws
C-ri
n
g
From the
side
Slide
Page 3
Plik z chomika:
misiekyo
Inne pliki z tego folderu:
Epson StylusPhoto TX800FW Service Manual.pdf
(22430 KB)
Epson StylusPhoto TX700FW Service Manual.pdf
(22430 KB)
Epson StylusPhoto PX800FW Service Manual.pdf
(22430 KB)
Epson StylusPhoto PX700FW_ Service Manual.pdf
(22430 KB)
Epson Artisan 800 Service Manual.pdf
(22430 KB)
Inne foldery tego chomika:
_Instrukcje serwisowe
Apple
Brother
CANNON
CMS
Zgłoś jeśli
naruszono regulamin