e87retrofit-asap.pdf

Original BMW Accessory.

Installation Instructions.

Front seat heating system retrofit

BMW 1 Series (E 87)

BMW 3 Series Saloon (E 90)

BMW 3 Series Touring (E 91)

BMW 3 Series Coupé (E 92)

Retrofit kit No.

61 11 0 391 644 Retrofit kit for E87 with manual seat adjustment

61 11 0 400 883 Retrofit kit for E90, E91 and E92 with manual seat adjustment

61 11 0 405 003 Retrofit kit for E90, E91 and E92 with electric seat adjustment

61 11 0 413 834 Retrofit kit for E87 with electric seat adjustment

Installation time

The installation time is 3.5 hours, but this may vary depending on the condition of the car and the equipment in it.

The installation of heating elements E is not included in the above installation time and must be calculated

separately depending on the equipment in the car (see KSD for installation time and further details).

In general the car must be upgraded to the latest I stage status by flashing before starting the work. Depending on

the production age of the car and the work already carried out on the car, the programming times will vary, which

means that we cannot quote a specific time at this point.

The installation time does not include any time for programming/encoding, as this depends on the age of the car

and the equipment in it.

Important information

These installation instructions are primarily designed for use within the BMW dealership organization and by

authorized BMW service companies.

In any event the target group for these installation instructions is specialist personnel trained on BMW cars with the

appropriate specialist knowledge.

All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and work

instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety

regulations.

To avoid unnecessary extra work and/or costs, if any installation or function problem occurs, after a

brief troubleshooting session (approx. 0.5 hours), please contact the following:

1. Either your national subsidiary or your regional office

2. The Support team via the Aftersales Assistance Portal (ASAP) using the optional technical parts

support application.

Specify the chassis number and the part number of the installed retrofit kit and give a precise

description of the problem.

Do not archive the hard copy of these installation instructions since daily updates are made by ASAP!

Pictograms:

Denotes instructions that draw your attention to special features.

Denotes the end of the instruction or other text.

01 29 0 405 002

7/2006

(Z/Z)

Installation information

Ensure that the cables/lines are not kinked or damaged as you install them in the car. Costs incurred as a result of

this will not be reimbursed by BMW AG.

Additional cables/lines that you install must be secured with cable ties.

If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.

After the installation work, the retrofit must be programmed / coded via the Retrofit path.

All the figures show LHD cars, proceed in exactly the same way on RHD cars.

Ordering instructions for E87

Check color versions and technical equipment. The following parts are not supplied in the retrofit kit and must be

ordered separately (see EPC for part number and details).

- Center console switch center O

-Tim P or R

- Trim for center instrument panel Q

Ordering instructions for E90, E91 and E92

Check color versions and technical equipment. The following parts are not supplied in the retrofit kit and must be

ordered separately (see EPC for part number and details).

- Center console switch center O

-Tim P

List of special equipment

The following special equipment must be taken into consideration when installing the retrofit kit:

SA 459

Electric seat adjustment with memory for driver’s seat

SA 609

Professional navigation system

Special tools required

52 0 050, pliers

00 9 317, Trim wedge

01 29 0 405 002

7/2006

(Z/Z)

Contents

Section

Page

1. Parts overview for E87 (cars without SA 459 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Parts overview for E87 (cars with SA 459 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3. Parts overview for E90, E91 and E92 (cars without SA 459 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4. Parts overview for E90, E91 and E92 (cars with SA 459 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5. Preparatory work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6. Connections diagram for driver’s seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7. Passenger seat connections diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

8. Installation and cabling diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

9. To install the seat modules and heating elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

10. To connect the seat cable for the driver’s seat (cars without SA 459 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

11. To connect the seat cable for the driver’s seat (cars with SA 459 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

12. To connect the seat cable for the passenger seat (all cars) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

13. To install and connect the wiring harness for the driver’s and passenger seat . . . . . . . . . . . . . . . . . . . . . . . . 17

14. To install the center console switch center (E87 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

15. To install the center console switch center (E90, E91 and E92 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

16. Concluding work and coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

17. Circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

01 29 0 405 002

7/2006

(Z/Z)