jacht.pdf

(93 KB) Pobierz
Visio-Yacht.vsd
Yacht
1
2
3
4
Fold in half.
Crease through both layers,
but only on the top half of
the paper.
5
6
7
8
Mountain fold behind, a little lower
than where the diagonal crease
meets the edge (this distance will
be the height of the mast).
Crease the diagonals to the centre.
Onle crease through the top 2 layers.
Unfold the top and bottom.
9
10
10a
10b
This shows the halfway
position.
11
12
13
Unfold everything!
Collapse. This is similar to
step 10.
© Robin Glynn May 2001
3413669.005.png 3413669.006.png 3413669.007.png
 
Yacht
14
15
16
Fold in half while collapsing the middle
section on the creases indicated.
Unfold to step 15 but do not flatten.
17
18
19
Make 4 open sinks.
Fold in half while collapsing the 2
sections (just like in step 15).
Unfold again, but do not flatten.
20
21
22
For the next few steps only the circled
area is shown.
Fold and stretch.
Valley fold.
23
24
25
Repeat steps 21-23 on the other side.
Fold back again while collapsing on
the existing creases.
© Robin Glynn May 2001
3413669.001.png 3413669.002.png 3413669.003.png
Yacht
26
27
28
Crease through all layers.
Fold in half and flatten.
Valley fold both layers up.
29
30
31
32
Inside reverse fold.
Squash fold.
Wrap a single layer behind. To do
this easily, you need to unfold the
model slightly.
Valley fold and tuck behind all the
other layers.
33
34
35
36
Crease all layers.
Inside reverse fold the front only.
Valley fold the corner and tuck
behind to lock.
37
38
Valley fold inside.
Mountain fold the inner layers to lock.
If you round the base of the model it
will stand up.
© Robin Glynn May 2001
3413669.004.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin