D-Link DI-514_QIG_v_100.pdf

This product can be set up using

any current web browser, i.e.,

Internet Explorer 6 or Netscape

Navigator 6.2.3.

DI-514

2.4GHz Wireless

Router

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with other

computers, you must have either an Ethernet-based Cable or DSL modem with an

established Internet account from an Internet Service Provider (ISP).

2. It’s best to use the same computer that is connected to your modem for configuring

the DI-514 Wireless Router. The DI-514 acts as a DHCP server and will assign all

the necessary IP address information on your network. See Appendix at the end

of this Quick Installation Guide or the Manual on the CD-ROM for setting each

network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-514 2.4GHz Wireless Router

CD-ROM (containing Manual and Warranty)

Ethernet (Straight Through) Cable

5V DC Power Adapter

Using a power supply

with a different voltage

rating will damage and void

the warranty of this product.

If any of the above items are missing, please contact your reseller.

specifications subject to change without notice. DI-514. 06132003

Connecting The DI-514 Wireless Router

To Your Network

A. First, connect the power adapter to the receptor at the back panel of the

DI-514 and then plug the other end of the power adapter to a wall outlet or power

strip. The Power LED will turn ON to indicate proper operation.

B. 1. Power off your Cable or DSL modem; some devices may not have a on/off switch

and will require you to unplug the power adapter. Now, the DI-514 should be

powered on and the Cable / DSL modem should be turned off.

2. Cable / DSL modem ( Power Off ) – DI-514 ( Power On )

Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL modem.

After the Ethernet cable is securely connected, power on the Cable / DSL modem by

turning on the unit or plugging in the power adapter.

3. Cable / DSL modem ( Power On ) – DI-514 ( Power On )

Insert the other end of the Ethernet cable to the WAN PORT on the back panel of the

DI-514. The WAN LED light will illuminate to indicate proper connection. If the WAN

LED is not illuminated, please go back to step B1 and repeat the instructions.

C. Insert an Ethernet cable to LAN port 1 on the back panel of the DI-514 and an

available Ethernet port on the network adapter in the computer you will use to

configure the DI-514. The LED light for LAN Port 1 will illuminate to indicate proper

connection. (Note: The LAN Ports on the DI-514 are Auto-MDI/MDIX. Meaning you

can use a straight-through or crossover-Ethernet cable to the LAN Ports.)

D. Computers equipped with 802.11b wireless adapters will be able to connect to the

DI-514. The DWL-650 Air Wireless Cardbus Adapter and the DWL-520 Air Wireless

PCI Adapter will be able to connect out of the box with the router using their default

wireless settings.

D. Antennas

Used to

wirelessly

connect to

802.11b

adapters.

C. LAN PORTS These are

the connections for

Ethernet cables to Ethernet

enabled computers.

B. WAN PORT This is

for the connection of an

Ethernet cable to the

Cable or DSL modem

A . Receptor for

Power Adapter .

Reset Button Pressing this button restores the

Router to its original factory default settings.

Restart Your Computer

Connecting Additional Computers To

The DI-514

Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped

computers to the remaining Ethernet LAN ports on the back panel of the DI-514.

Status LED – a

blinking light indicates

that the DI-514 is ready.

WLAN LED – a solid

light indicates that the

wireless segment is

ready. This LED

blinks during wireless

data transmission.

LOCAL NETWORK LEDs –

a solid light on the port

indicates a connection to

an Ethernet enabled

computer on ports 1-4.

This LED blinks during

data transmission.

POWER LED – a solid

light indicates a proper

connection to the power

supply.

WAN LED – a solid light

indicates connection on the

WAN port. This LED blinks

during data transmission.

When you have completed the steps in this Quick Installation Guide, your connected

network should look similar to this:

Using The Setup Wizard

Open your Web browser and

type “http://192.168.0.1” into the

URL address box. Then press the

Enter or Return key.

The logon pop-up screen will appear.

Type “admin” for the username and

leave the password field blank.

Click OK

Once you have logged in, the Home

screen will appear.

Click Run Wizard

The Setup Wizard (continued)

You will see the following screens

Click Next

Set up your new password .

You have the option to establish

a password.

Click Next

Choose your time zone from

the drop down list.

Click Next

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: