Samsung Flashing Tutorial.pdf

Samsung Flashing Tutorial.

Required: Powered Serial Cable (COM Port Cable)

Downloader Software for appropriate handset

Flash files for appropriate handset

The process using a serial cable is not fast and takes around 90 minutes for a

D600 for example.

For purposes of this tutorial we will use a Samsung D600 but the same

applies should you be flashing a E250 or D900 etc.

Make sure your handset Battery is fully charged!!

Connect 9V Battery to your flashing cable or power adapter.

Power off the phone with no SIM inserted and connect phone to cable and

cable to PC.

Select correct com port – Usually COM1.

COM speed should be 115200. Faster will not work!

Select the BIN + TFS radio button.

Select your binary file:

Press the BIN file button and choose the binary file you want to flash for

example "D600XAEJ4.cla" for a D600.

Press the TFS button and choose the TFS file you want to flash for example

"D600XAEJ4.tfs" for a D600.

Click Start.

Tap the power button on the phone when prompted. The phone should not

turn on, but software will recognise the ignition.

There will be some communications activity and then the phone will connect,

and the "Download" button will now be highlighted.

Click the download button and the flash download will begin.

Note: the entire flashing process takes approx 90 minutes for a D600 and you

must not stop the operation once started. Should you have say a power failure

half way through, don’t panic just repeat the procedure from the start!

Once flash has finished, press stop and disconnect the phone.

Your phone has been successfully flashed!

Take out and replace battery and power on

Occasionally after debranding a handset some models when powered up do

not display correctly, ie white screen, no graphics, only text.

Solution: insert a SIM card and power the phone up.

Press the menu key.

Move to bottom right (settings) and select it.

Select reset settings

Select all and then reset

Password is 00000000 (eight zero's)

If this does not work try using the code: *2767*3855#

You may need to get your GPRS and MMS settings after this procedure.

Important Note:

Some Samsung handsets are available in more than one version for

example D600 and D600E – These are NOT the same and they require

the correct flash files! A D600 flash filename will start D600XA but a

D600E filename will start D600EXA. Likewise the E250 and E250D require

their own files. Pretty obvious really but worth checking!!

The software used here was OneNAND Downloader this should be easy to

find using Google by searching for this plus your handset model number. It is

available for most Samsungs.

The serial cable sold for flashing Samsung phones should have a battery

connector on it. If it does not then you probably will not get much luck in

flashing your handset! Some cables come with a power adaptor that sits

between your PC and the data cable. If this is the case try using it!

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: