QuickStart_Forsaken.pdf
(
1331 KB
)
Pobierz
670055392 UNPDF
What you need to play:
-
Dark Age Miniatures
-
2 20 sided Dice
Target Number (TN)
-
The Target Number (TN) is the number needed for a successful outcome
on any die roll. Determine a TN with one or more Statistics and any situational modiiers that
may apply to the speciic action performed. If the result is equal to or lower than the TN, you
are successful. The TN is calculated for anything that requires a die roll including attacks,
Saves, Fear or Panic test, etc.
Close Assault (CA)
-
When you move a Unit into BtB with an enemy Unit this is considered a
Charge. Even if you had spent all your AP in moving you get a free AP to use one of your
AG’s in CA. To hit add your AS of the attack(s) to the targets DF, this is your Target Number
(TN) to roll equal to or under to hit. If you have an attack that has multiple attacks you
may split the attacks if you want between two different enemy Units if you are in BtB with
Multiple enemy Units.
-
Tape Measure (Inches)
-
4’ x 4’ table top
-
Terrain
What makes Dark Age Different?
-
True skirmish system, no facing requirements.
-
Rolling LOW is good, ‘20’=BAD, ‘1’=GOOD
-
Alternate Activation, you activate a Unit/Squad, then your opponent activates a Unit/
Squad.
-
Not a lot of miniatures are needed, Forces can contain 6
-
16 miniatures per side.
-
Squad based Activation, each Squad member activates separately, i.e. move each
Squad member before moving onto the next Squad member.
-
Activation Points, you can customize how you activate your Units.
Now that you understand the basic stats of a Dark Age Unit let us further explain how to
play the game.
Charging
-
When you get in BtB with an enemy Unit it is considered a Charge. You gain a
free AP to use with one AG as well as a +1AS/+1PW to all attacks in the chosen AG.
Setting up the Battleield
As mentioned before you need a table top board 4’x4’ or smaller to play the game. For
the purposes of playing the game with demo armies or learning how to play the game for
the very irst time we are going to assume that you are using a 2’x2’ table. Make sure you
have plenty of terrain. Ruined buildings, rocks, and hills are ideal for any Dark Age setting.
Ranged Assault (RA)
-
If you have a ranged attack you may spend 1 AP to make the
attack. Then measure if you have range. If you do add the AS of your attack to the
target’s DF, this is your TN to roll equal to or under to hit.
Armor Checks
-
When you are hit by an attack whether it is a CA or RA you need to make
an AR check to avoid taking a wound. Subtract the PW of the attack from your AR, this is
your TN to roll equal to or under to avoid taking a wound. If you roll a ‘20’ on your Armor
check this is a Critical Failure and you take an extra HP of damage.
Deployment
Once the battleield is set up now you must deploy your Forces onto the table. Each
player rolls a D20, the person with the lowest roll wins.
The winner then can either deploy one of their Unit/Squads irst OR nominate an exact
Unit/Squad of their opponent’s to deploy irst. Once the irst Unit/Squad is deployed then
both players alternate deploying their Unit/Squads until there are no more Unit/Squads
to deploy.
The Basics
The core basics of the game involve the Unit’s stats. A Unit is one Dark Age miniature,
several Units of the same type are considered a squad. Each Unit has seven stats:
Special and Weapon Abilities
Each Unit in Dark Age is unique and may have Special or Weapon Abilities (SA or WA).
These abilities are displayed on the Unit cards. For ease of play the Special and Weapon
abilities for the Units in this Starter Box Set are included here, not all SA’s and WA’s are
detailed, just the Abilities that pertain to the contents of the Boxed Sets are listed here. For
further SA and WA explanations refer to Dark Age Apocalypse: Forcelists or www.dark
-
age.com.
AP (Activation Points)
-
This is the number of Actions each Unit can perform in one
activation. Each Unit gets one Activation per Game Turn.
DF (Defense)
-
The lower the number the better, this is how hard it is to hit your Unit.
AR (Armor)
-
The higher the number the better, this is how you avoid from taking a wound
when you get hit.
MV (Move)
-
This is the Unit’s move in inches per AP spent.
PS (Psyche)
-
This is used for Morale or to see if you are affected by Fear. Some Force use
this stat for psychic powers.
HP (Hit Points)
-
How many wounds your unit can take.
PV (Point Value)
-
Cost per Unit, most quick games start at 300 points, casual games are
played at 500 points. Tournament level games are played at 750 points.
The Game Turn
Each Game Turn of Dark Age consists of 4 distinct Phases:
Phase 1
-
Preparation Phase. This Phase contains the Lingering Effects. Any Game Effects
that are in play from the previous game turn take place here.
Phase 2
-
Initiative. Roll a D20 just like the Deployment, lowest roll wins.
Phase 3
-
Activation Phase. Each Unit/Squad gets ONE Activation per turn, irst player
activates a Unit/Squad then the Second player Activates a Unit/Squad. Alternate until all
Unit/Squads have been Activated.
Phase 4
-
End of Game Turn. Any End of Game Effects take place at this time.
FURIOUS CHARGE
Furious Charge allows Units with the Ability to gain +2 TN and +2 PW when making a
Charge, instead of the normal +1 TN and +1 PW.
NEVER FEAR
Units with this Ability are immune to Fear.
Attack Groups (AG)
-
These are your attacks. There are two types of Attacks they are:
Close Assault (CA) and Ranged Assault (RA). You spend an AP to make an attack. Each
AG has stats, they are:
NEVER PANIC
Units with this Ability are immune to Panic. Squads with this Ability do not suffer the effects
of either ‘Lack of Support.
Game Play
Activating Units/Squads
-
Each Unit gets one Activation per game turn, when a Unit is
activated you may spend all or none of it’s AP , if you don’t use the AP for that Game
Turn, then the Unit may not activate later during the current Game Turn but may activate
as normal in the next Game Turn. When you Activate a Squad Activate one Unit at a
time, completing all of it’s actions before moving onto the next Unit in the Squad.
AS (Assault)
-
The higher the number the better, this is you chance to hit.
RF (Rate of Fire)
-
How many times you can use the attack, a dash means you can do this
attack as many times as you have AP.
PW (Power)
-
Higher the number the better, when you hit your opponent must make an
Armor Check. If you see a ‘x2’ or ‘x3’ that indicates the number of dice you opponent has
to roll to make their Armor Check.
RN (Range)
-
If it says CA then this attack may only be used in BtB. If there is a number
then that is the max range in inches you may use that attack.
MAL (Malfunction)
-
If you roll this number or higher you hit yourself, sorry!
TOUGH AS NAILS
Units with this Ability do not take an additional HP of damage on a critical Armor Save
failure (A roll of a 20). Any special effects, like Knock Prone, still automatically affect the
Unit. Tough as Nails also gives a +2 modiier to Poison Tests.
Squad Coherency
-
Squads must stay in coherency, Small to Medium Units = 2 inches,
Large Units = 4 inches, Huge Units=6 inches. Check for Coherency at the end of the
Squad’s activation, Unit’s in BtB with Enemy Units do not count towards Coherency.
Unit’s out of Coherency are
-
2 TN to all checks except AR checks, until they move into
coherency.
KNOCK PRONE (KP)
A Knock Prone (KP) weapon is capable of knocking the opponent to the ground. The Ability
is followed by a number in parentheses. This number is the TN needed to successfully KP
the target. A KP roll is made for every successful hit regardless of damage (If an opponent
has any Abilities that may reverse the successful hit they may make that attempt before
the KP roll). If the attacking player rolls equal to or under the TN, the target Unit has been
Knocked Prone, and the Unit is marked as Prone. For every size larger the attacking Unit
is than the target Unit add 2 to the KP target number. For every size smaller the attacking
Unit is than the target Unit subtract 2 from the KP target number.
NOTE: A 20 always fails and a 1 always succeeds, no matter what size the Units are. RA
Weapons with KP work exactly like CA weapons with KP
Unit
-
Dark Age represents forces on the Battleield by Miniatures, referred to as Units. A
Unit is a single Miniature. Grouped into two different categories, Units are either Individuals
or Squads. Therefore, the term “Unit” may refer to an Individual or a single member of a
Squad.
Movement
-
You may spend as much of your AP you want in Moving, simply choose a
spot you want to move to, measure the distance and calculate how much AP it will take,
or simply move your Unit the amount of MV you can per each AP spent. If you get into
Base
-
to
-
Base (BtB) then it is considered a charge.
Line of Sight (LoS)
-
Each Unit has a 360 degree arc. LoS is true LoS, so if an obstacle is
between you and the target they may receive Cover if enough of the model is obscured.
Squad
-
Squads are teams of Units that move and attack as a group. A Squad may
contain a Leader who generally has different Statistics.
Plik z chomika:
lcrpg
Inne pliki z tego folderu:
Xtreme_Gencon2011.pdf
(8118 KB)
WeaponAbilities_Apocalypse.pdf
(169 KB)
Tutorial - Miniature Dipping.pdf
(17710 KB)
Tutorial - Ice Wall Templates.pdf
(4811 KB)
Tutorial - Carrier Co Mines-Part 3.pdf
(17819 KB)
Inne foldery tego chomika:
Alternity RPG
Call of Cthulhu d20
Car Wars Card Game
CAV Combat Assault Vehicle
Celtos
Zgłoś jeśli
naruszono regulamin