IDSGettingStarted_ENG.pdf
(
1040 KB
)
Pobierz
User Guide
Quick Start Guide
Contents
Contents ------------------------------------------------------------------------------------------------------------------------------- 1
IDS Quick Start ----------------------------------------------------------------------------------------------------------------------- 2
STEP 1: Insert VCM DVD into DVD Drive.----------------------------------------------------------------------------------- 2
STEP 2: Install IDS by select the IDS icon on the left side of the screen. -------------------------------------------------- 2
STEP 3: Install Calibration files by selecting the Calibration icon on the dash panel. ------------------------------------ 2
STEP 4: Boot VCM (Vehicle Communication Module). --------------------------------------------------------------------- 2
STEP 5: Start IDS by double clicking the IDS icon on the desktop --------------------------------------------------------- 2
STEP 6: Start new session or open a previous session to work with -------------------------------------------------------- 2
STEP 7: Diagnose Vehicle-------------------------------------------------------------------------------------------------------- 3
STEP 8: Connect the VMM for Measurement Tools -------------------------------------------------------------------------- 3
STEP 9: Internet Activation ------------------------------------------------------------------------------------------------------ 3
STEP 10: Questions---------------------------------------------------------------------------------------------------------------- 3
Steps to setting your user type: IDS requires all users to have Administrator privileges------------------------------- 4
Steps to setting your user type as an Administrator:---------------------------------------------------------------------------- 4
Adding a User as Administrator:-------------------------------------------------------------------------------------------------- 4
V1.1 Dec. 15, 2008
1
Quick Start Guide
IDS Quick Start
STEP 1: Insert VCM DVD into DVD Drive.
If you do not see the screen in fig. 1 within 10 seconds, do the following:
o
Double click My Computer on your desktop
o
Double click on your DVD drive
o
Double click the 'Launch.exe' file
STEP 2: Install IDS by select the IDS icon on the left side of the screen.
Hover over any of the icons to see a brief description of the item to be installed. The
description will appear on the right side of the screen (fig. 2).
After installing IDS, return to dash panel.
Dash Panel
fig.1
fig.2
STEP 3: Install Calibration files by selecting the Calibration icon on the dash panel.
STEP 4: Boot VCM (Vehicle Communication Module).
Connect VCM to vehicle by connecting the 16-pin DLC cable between the vehicle and VCM.
Connect the VCM to the laptop using the Ethernet-USB Host Cable (H-406). Two H-406
cables are included in IDS kit. Both the VCM and VMM use this cable.
STEP 5: Start IDS by double clicking the IDS icon on the desktop.
STEP 6: Start new session or open a previous session to work with
Automatic Vehicle ID – Select the vehicle icon.
V1.1
2
Quick Start Guide
Open Previous Session – Select the vehicle icon (above). Next, select the vehicle
information screen
Manual Vehicle ID – Select vehicle icon
, then 'Manual Vehicle Entry' from the menu.
STEP 7: Diagnose Vehicle
The VCM can be used to perform many link-based tests including Datalogger, SelfTest, read
CMDTC's, Program Modules, Power Balance, and many Service Functions.
The VMM is needed to perform tests requiring measurement tools including Fuel System
Test, Oscilloscope, Digital Multi-meter, and Ignition System Test.
STEP 8: Connect the VMM for Measurement Tools
Connect the VMM to the laptop using the H-406 (identical to VCM cable)
Connect the Battery Cables to vehicle battery.
See IDS Hook Up Screens for additional cables needed. These screens will be displayed as
needed throughout the tool. See figure 3.
IDS
Fig. 3
STEP 9: Internet Activation
See IDS Activation Guide for steps to set up your Internet connection. The IDS Activation Guide
can be found in the IDS Kit.
STEP 10: Questions
If you have questions on basic IDS operation, see additional documentation in your IDS Kit.
V1.1
3
Quick Start Guide
Steps to setting your user type:
IDS requires all users to have Administrator privileges
Steps to setting your user type as an Administrator:
Clickstart
Control Panel
Select User Accounts (Fig. 1)
Create an Account
Type a name for the new account
Select Computer administrator and Create Account (Fig. 2)
Fig. 1
Fig. 2
Adding a User as Administrator:
ClickStart
ControlPanel
Select User Accounts (Fig. 1)
Click Add (Fig. 3a/b)
Type user name
Type domain name of computer
Select Other for Administrator (Fig. 4)
V1.1
4
Quick Start Guide
Fig. 3b
Fig. 3a
Fig.
V1.1
5
4
Plik z chomika:
gerchart45
Inne pliki z tego folderu:
Aktualizacja IDS Ford.doc
(7962 KB)
IDS Ford DVD.doc
(491 KB)
IDSGettingStarted_ENG.pdf
(1040 KB)
IDS Ford (Integrated_Diagnostic_System)_v61.00_WEB_PL.rar
(223705 KB)
Inne foldery tego chomika:
- Diagnostyka Pojazdów
- Diagnostyka samochodowa
- Diagnostyka samochodowa
- Diagnostyka samochodowa
- Diagnostyka samochodowa(1)
Zgłoś jeśli
naruszono regulamin