OPCOR99GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

OPEL

MOD. CORSA YEAR 99 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment, on the

support of the driver’s side shock absorber. To pass the cables use the original

rubber sleeve located near the support of the driver’s side shock absorber.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the left side of the

dashboard, driver’s side.

POWER SUPPLY

+ 30: connect to the general power supply of the fuse box.

- 31: connect with a cable terminal directly to the car body.

IGNITION WIRE

+ 15/54: connect to the BLACK wire located in the wiring harness behind the sill

cover, driver’s side.

DIRECTION INDICATORS

Connect to the BLACK/WHITE and BLACK/GREEN wires located in the wiring

harness behind the driver’s side sill cover.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the YELLOW wire directly on the coming out of the respective connector of the

switch located inside the driver’s side door.

Front window, passenger’s side:

cut the VIOLET/WHITE wire.

Rear window, driver’s side:

cut the VIOLET/WHITE wire.

Rear window, passenger’s side:

cut the VIOLET/WHITE wire.

Connections must be done in the core hitch coming out of the driver’s side door.

Note: For the vehicles with windows closing automatism refer to the

diagram nr. 111.

CENTRAL DOORS LOCKING Negative control signal

Connect to the BROWN/WHITE wire (unlock) and to the BROWN/RED wire (lock)

located in the wiring harness behind the driver’s side sill cover.

IMMOBILISATION POINT

Fuel pump

Cut the 2,5 mm 2 RED/BLUE wire located in the wiring harness behind the driver’s

side sill cover.

STARTER

+50 : Cut the BLACK/YELLOW wire located in the wiring harness coming out of

the connector of the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate.

DOORS SWITCH

Connect to the LIGHT GREY wire located in the wiring harness behind the driver’s

side sill cover.

BOOT SWITCH

Connect to the BROWN/WHITE wire coming out of the connector of the boot

lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

opcor99gbb.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N° 111

Diagram to make the electric windows locking on

OPEL CORSA – TIGRA with automatism

(for Bridge serie antithefts)

Bridge serie antithefts

(autodriven serie ) +30

1052

1 2 3 4 5

BROWN/WHITE

(Temporized to 24s)

Diodes

1N4004

Left window Right window

switch switch

GREY/GREEN

Original switches

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

opcor99gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: