MIPDI01GBD.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE MITSUBISHI MOD. PAJERO DI-D YEAR. 01 ﬁ

PETROL

DIESEL

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment, on the

support of the passenger’s side shock absorber. Pass the cables through the

original core hitch located in the bulkhead that divides the engine compartment

and the passenger’s compartment, passenger’s side.

CENTRAL UNIT POSITION

The modular systems and the modules should be positioned on the left of the

dashboard, driver’s side.

POWER SUPPLY

+30: connect to the 4 mm 2 RED wire located in a multiway connector, in the fuse

box.

-31: connect with a terminal cable directly to the car body.

IGNITION WIRE

+15/54: Connect to the BLACK/WHITE wire with SILVER reference located in the

wiring harness placed on the left, along the steering column.

DIRECTION INDICATORS

Connect to the GREEN/RED wire at the position nr.9 and to the

GREEN/YELLOW wire with SILVER reference at the position nr.7 located in the

15 way white connector, in the lower part of the fuse box placed under the driver’s

side dashboard.

ELECTRIC WINDOWS

BUS controls

The signals to make the module connection are not available.

CENTRAL DOORS LOCKING

Negative control signal

Connect to the LIGHT GREEN/BLACK wire (lock) and to the BROWN/BLACK

wire (unlock) located in the 32 way white connector placed on the left of the fuse

box, under the driver’s side dashboard. For the Bridge serie antithefts make

reference to the diagram nr.73 and for the 3100 serie antithefts make reference

to the diagram nr.73A.

IMMOBILISATION POINT

Gasoil pump

Cut the GREEN/BLACK wire with SILVER reference located in the wiring harness

coming out of the relay marked “D”, placed in the relay holder (the little one) on

the side of the battery.

STARTER

+50: Cut the BLACK/YELLOW wire located in the wiring harness coming out of

the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, near the original

rubber bonnet bumper.

DOORS AND BOOT

SWITCH

Connect to the RED/GREEN wire with SILVER reference located at the position

nr.13 of the 15 way white connector, placed in the lower part of the fuse box,

under the driver’s side dashboard.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

mipdi01gbd.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°73

Diagram to make the central doors locking on

MITSUBISHI PAJERO DI-D mod. 2001

(For Bridge antithefts)

BROWN (art. 7918)

VIOLET

ORANGE/WHITE

YELLOW/BLACK

ORANGE

VIOLET/WHITE

GREY/BLACK

LIGHT GREEN/BLACK BROWN/BLACK

32 way white connector in the fuse box

Note: To follow this diagram it is suggested to use antithefts with 6 wires of the

central doors locking unit. In the case of Bridge installation it is necessary to use the

universal module art. 1044 following the wires colours as described in the diagram.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

mipdi01gbd.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°73A

Diagram to make the central doors locking on

MITSUBISHI PAJERO DI-D mod. 2001

(For 3100 serie antithefts)

VIOLET

ORANGE/WHITE

YELLOW/BLACK

ORANGE

VIOLET/WHITE

GREY/BLACK

LIGHT GREEN/BLACK BROWN/BLACK

32 way white connector in the fuse box

Note: To follow this diagram it is suggested to use antithefts with 6 wires of the

central doors locking unit. In the case of Bridge installation it is necessary to use the

universal module art. 1044 following the wires colours as described in the diagram.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

mipdi01gbd.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: