Bluetooth update - AVIC-Fxxx - Ver330.pdf - Pioneer Avic910BT - serwis24-24

Bluetooth Update Instructions Î Ver 3.30

NOTES:

V If you have any difficulty carrying out these instructions, please first refer to the

Firmware Update FAQ included in this document and/or contact Pioneer Customer

Support Center.

V This software update improves Bluetooth connectivity.

A. Check the current Bluetooth Software version of the Navigation Unit:

Switch on your Navigation unit by switching on the ignition of your car. If you donÓt see

ÐTop MenuÑ displayed on top of the display, press the ÐmenuÑ button to open top menu.

Press ÐPhoneÑ and ÐPhone SettingsÑ to open Phone Settings menu.

Make sure ÐBluetooth On/OffÑ is set to ÐOnÑ.

Scroll down the menu by pressing the downward arrow on the left.

Select "Bluetooth Software Update"

You should see the screen like below :

If the version displayed is SW330 or higher, then your product is equipped with the latest

software and there is no need for any upgrade.

B. Download the Bluetooth update file from Pioneer's website:

Download the required Bluetooth update file from the website to your computer:

Version 3.30: "AVIC_Fseries BT330.zip"

C. After the copying process is completed, confirm the file size:

Check the file size of the downloaded Bluetooth software file by right-clicking on the file and

selecting Properties. (Download again if the file size is incorrect)

AVIC_Fseries BT330.zip: 370 KB (379.439 bytes)

D. Decompress the file:

Once you have downloaded the file to your computer, locate the file on your hard disk drive

and double click the file to decompress it. (If you do not have a decompression utility installed

on your computer, you can easily download one for free.)

E. Create the Update SD-card (updating is not possible using USB connection or CD):

To create an update SD-card, you will need:

A PC with SD-card reader/writer

One formatted blank SD-card with minimum capacity of 512 MB

Supported OS: Windows: 98, 98SE, Me, 2000, XP, Vista, MacOS

Put the SD-card in the SD-card reader/writer.

Copy the unzipped 3 files to the root directory of an empty SD-card.

ÐCK5000_330_RLS.binÑ, flash_p4_lwp.binÑ, rtl_115200_8192_p4.binÑ

F. Update the Bluetooth Software for your unit:

Turn the ignition on.

Press ÐPhoneÑ and ÐPhone SettingsÑ in the main menu to open Phone Settings menu.

Put the SD-card which contains the update files into the unit

Make sure ÐBluetooth On/OffÑ is set to ÐOnÑ.

Scroll down the menu by pressing the downward arrow on the left.

Select "Bluetooth Software Update"

Press ÐSoftware UpdateÑ button on screen to start updating.

Update takes about 3 minutes.

Note: Do not turn off or disconnect the power, or remove the SD card while the updating is in

progress. When the upgrade is completely finished the message ÐSoftware has been updatedÑ

will be displayed.

Turn off the ignition from your car / demo board

Remove the SD card from the set

The upgrade was successful if the Version (see point 1) has become SW330.

The Bluetooth software of your unit is updated.

Firmware Update FAQ

Q: What if my set shows Ðn/aÑ on Bluetooth software version information?

A: Please press ÐSoftware UpdateÑ button again on Bluetooth Software Update screen to retry

the process.

Q: What if the set switches off while updating software?

A: Turn off the ignition key and turn on again. Then perform the whole procedure on point 6.

Q: What if I cannot upgrade my set / the set does not show the start up screen after more

than 1 attempt?

A: Please contact your local Pioneer service organisation for a product check-up.

Contact Information

Pioneer Customer Support Center

http://www.pioneer.eu

------------------------------------------------------------

Bluetooth update - AVIC-Fxxx - Ver330.pdf

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: